ODM MODULE 2.08 and still problems.... - GSM-Forum

ARC · 03-05-2007, 11:11

I tried to connect my C118 to this module version
no success.

I am using adapter nokia for power supply and attached my cable to SERVICE

always this problem:
see picture below

iQ-BOX Support · 03-05-2007, 22:09

1. Attach Motorola Cxxx cable to SPECIAL port
2. Phone status: OFF
3. Open ODM Module
4. Select Model from list (C118)
5. Go to "Settings" tab and select "Special"
6. Go back to "Main" tab
7. Click on "Connect" button
8. Press power button on phone, and should now connect
9. Carry out which ever job you desire

BR,
IQ-Box Support.

ARC · 03-06-2007, 07:25

ok thanks,
i will test it and give feedback for sure.

hope it works.

ARC · 03-06-2007, 14:17

and it works........

thanks iq-team

here is the picture

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
iphone 3g update to 2.2.1 and still unlocked!!!!	mangaman	iPhone 2 / iPhone 3G / iPhone 3GS	15	06-21-2009 16:33

03-05-2007, 22:09	#2 (permalink)
iQ-BOX Support Freak Poster Join Date: Dec 2006 Posts: 114 Member: 411053 Status: Offline Thanks Meter: 3	1. Attach Motorola Cxxx cable to SPECIAL port 2. Phone status: OFF 3. Open ODM Module 4. Select Model from list (C118) 5. Go to "Settings" tab and select "Special" 6. Go back to "Main" tab 7. Click on "Connect" button 8. Press power button on phone, and should now connect 9. Carry out which ever job you desire BR, IQ-Box Support.

03-06-2007, 07:25	#3 (permalink)
ARC No Life Poster Join Date: Jun 2001 Location: UAE Age: 43 Posts: 1,419 Member: 5019 Status: Offline Sonork: 100.110196 Thanks Meter: 69	ok thanks, i will test it and give feedback for sure. hope it works.