GOT (Gsm Online Tool) - please report bugs here. - Page 2 - GSM-Forum

tririval · 11-16-2006, 14:40

try at K300.....
get error when finish write ppm.

Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_36_RED
CustomerID (flash): 36
CustomerID (OTP): 36
Handset IMEI: 35579500084397
Flash chip: 890D
Try to power on handset ...
Sending loader to handset RAM ...
Unpacking CPU file ...
Write CPU file: "K300_CHINA_R2AT003"
SUCCESS: write CPU flash
Unpacking PPM file ...
Write PPM file: "K300_APAC1_R2AT003"
SUCCESS: write PPM flash
Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_36_RED
CustomerID (flash): 36
Wait handset to power off ...
Write loader to handset flash ...
FAILURE: Code no 1953707

tanja1 · 11-16-2006, 14:43

Quote:

Originally Posted by duikeend

You have to select customization.

not possible to select

try it yourself

kiza40 · 11-16-2006, 15:17

Downloading CPU file from server ...
Downloading PPM file from server ...
Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_49_RED
CustomerID (flash): 49
CustomerID (OTP): 49
Handset IMEI:
Flash chip: 2019
Try to power on handset ...
Write loader to handset flash ...
Wait handset to power off ...
Try to power on handset ...
Start loader from handset flash ...
Sending loader to handset RAM ...
Try to power on handset ...
Sending loader to handset RAM ...
Unpacking CPU file ...
Write CPU file: "W810_R4CK003_ZONE1_STANDARD"
SUCCESS: write CPU flash
Try to power on handset ...
Sending loader to handset RAM ...
Unpacking PPM file ...
FAILURE:
FAILURE: Code no 3003052

Tried to flash W810i and this was the result.
Phone works but with mixed R4CK003 and R4DB005 original customization that was on phone?
Any clues to error code?

gotman · 11-16-2006, 16:54

When flash file button is not enabled it means that for the specified phone the flashing is still under development (you are unable to select customization yet), just try again it will work in a short time.

Regards

Mr Twitch · 11-16-2006, 17:04

yesterday logged in ok but today i get invalid ip address have been back to web site to try and reset ip address but it needs 5 days to reset please can you advise?>

power777 · 11-16-2006, 17:46

Same error invalid IP....whats the problem?

bizon69 · 11-16-2006, 17:48

Quote:

Originally Posted by Bohosh

I have many errors !!! Just look at the attachments !!!!
First is after logger connect to server.
Second when the soft starts.
Third when I Choose model of phone.
And last....after "Get handset identificators"

I have the same problem

My machine is:
Athlon64 3000+
Asus K8N4E deluxe
1GB Ram

robbie · 11-16-2006, 18:01

Can`t flash SE Z530, just before start writing the main flash to the phone, the message appears:"FAILURE: Code no 1961445"

Here it is:

Start loader from handset flash ...
Sending loader to handset RAM ...
Try to power on handset ...
Sending loader to handset RAM ...
Unpacking CPU file ...
Write CPU file: "Z530_R6BA030_GENERIC"
FAILURE: Code no 1961445

ribbentrop · 11-16-2006, 18:13

k300 , read unlock code by UFS

Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_36_RED
CustomerID (flash): 36
Wait handset to power off ...
Write loader to handset flash ...
FAILURE: Code no 1953707

Siemens man · 11-16-2006, 18:59

not working.................................

eblaster101 · 11-16-2006, 19:34

i havent got log but sucesffuly unlocked w810 and k750i cid 36

thanks great tool sometimes buggy when picking up phone thoguh as phone seems to boot

tanja1 · 11-16-2006, 19:46

Quote:

Originally Posted by gotman

When flash file button is not enabled it means that for the specified phone the flashing is still under development (you are unable to select customization yet), just try again it will work in a short time.

Regards

ok I will try again later

B.T.W. unlock Z530i worked like a charme

greetzzz

robbie · 11-16-2006, 20:23

Quote:

Originally Posted by robbie

Can`t flash SE Z530, just before start writing the main flash to the phone, the message appears:"FAILURE: Code no 1961445"

Here it is:

Start loader from handset flash ...
Sending loader to handset RAM ...
Try to power on handset ...
Sending loader to handset RAM ...
Unpacking CPU file ...
Write CPU file: "Z530_R6BA030_GENERIC"
FAILURE: Code no 1961445

I managed to flash/unlock Z530 without problem, but had to use other flash file, the most recent one - "Z530_R6DA001_GENERIC". Maybe "Z530_R6BA030_GENERIC" is damaged?

**GOT** · 11-16-2006, 20:42

Quote:

Originally Posted by sunnyboy

k300

Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_36_RED
CustomerID (flash): 36
Wait handset to power off ...
Write loader to handset flash ...
FAILURE: Code no 1953707

Quote:

Originally Posted by ribbentrop

k300 , read unlock code by UFS

Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_36_RED
CustomerID (flash): 36
Wait handset to power off ...
Write loader to handset flash ...
FAILURE: Code no 1953707

Quote:

Originally Posted by tririval

try at K300.....
get error when finish write ppm.

Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_36_RED
CustomerID (flash): 36
CustomerID (OTP): 36
Handset IMEI: 35579500084397
Flash chip: 890D
Try to power on handset ...
Sending loader to handset RAM ...
Unpacking CPU file ...
Write CPU file: "K300_CHINA_R2AT003"
SUCCESS: write CPU flash
Unpacking PPM file ...
Write PPM file: "K300_APAC1_R2AT003"
SUCCESS: write PPM flash
Try to power on handset ...
Reading handset identificators ...
BOOT Signature: A1_DB2010_36_RED
CustomerID (flash): 36
Wait handset to power off ...
Write loader to handset flash ...
FAILURE: Code no 1953707

Try now. New update is ready and will be downloaded automaticly.

GOT

ddgsm · 11-16-2006, 20:59

Please solve this IP restriction cause my adsl provider change IP every
day, so i must wait 5 days now to test GOT???

I tried to reset IP but is locked to 5 days(too much!!!);
I hope that You solve this real problem;
Regards, ddgsm.

11-16-2006, 16:54	#19 (permalink)
gotman Junior Member Join Date: Nov 2006 Posts: 2 Member: 392391 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Flash button disable problem When flash file button is not enabled it means that for the specified phone the flashing is still under development (you are unable to select customization yet), just try again it will work in a short time. Regards

11-16-2006, 20:59	#30 (permalink)
ddgsm Freak Poster Join Date: Nov 2004 Location: CRO Age: 33 Posts: 158 Member: 91454 Status: Offline Thanks: 1 Thanked 5 Times in 1 Post	Reset IP!!! Please solve this IP restriction cause my adsl provider change IP every day, so i must wait 5 days now to test GOT??? I tried to reset IP but is locked to 5 days(too much!!!); I hope that You solve this real problem; Regards, ddgsm.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
GOT (FREE MOTOROLA UNLOCK AND FLASH) - please report bugs here.	GOT	GOT Motorola	209	08-15-2008 20:15
GOT (Gsm Online Tool) - IMPORTANT ANOUNCEMENT - Prices	GOT	GOT (Gsm Online Tool)	74	04-24-2007 12:53
GOT (Gsm Online Tool) - IMPORTANT ANOUNCEMENT - Prices	GOT	Sony Ericsson	11	01-07-2007 11:10
GOT (Gsm Online Tool) for Motorola phones. FREE unlock, flash, add lang and repair.	GOT	GSM Mobile Links	139	12-09-2006 22:06
GOT (Gsm Online Tool) - get free testing account here	GSM-Shop.com.ua	GOT (Gsm Online Tool)	1	11-16-2006 17:43

11-16-2006, 14:40	#16 (permalink)
tririval Freak Poster Join Date: Oct 2003 Location: UK Posts: 218 Member: 42408 Status: Offline Thanks: 2 Thanked 5 Times in 3 Posts	try at K300..... get error when finish write ppm. Try to power on handset ... Reading handset identificators ... BOOT Signature: A1_DB2010_36_RED CustomerID (flash): 36 CustomerID (OTP): 36 Handset IMEI: 35579500084397 Flash chip: 890D Try to power on handset ... Sending loader to handset RAM ... Unpacking CPU file ... Write CPU file: "K300_CHINA_R2AT003" SUCCESS: write CPU flash Unpacking PPM file ... Write PPM file: "K300_APAC1_R2AT003" SUCCESS: write PPM flash Try to power on handset ... Reading handset identificators ... BOOT Signature: A1_DB2010_36_RED CustomerID (flash): 36 Wait handset to power off ... Write loader to handset flash ... FAILURE: Code no 1953707

11-16-2006, 15:17	#18 (permalink)
kiza40 Junior Member Join Date: Sep 2005 Age: 31 Posts: 25 Member: 184407 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Downloading CPU file from server ... Downloading PPM file from server ... Try to power on handset ... Reading handset identificators ... BOOT Signature: A1_DB2010_49_RED CustomerID (flash): 49 CustomerID (OTP): 49 Handset IMEI: Flash chip: 2019 Try to power on handset ... Write loader to handset flash ... Wait handset to power off ... Try to power on handset ... Start loader from handset flash ... Sending loader to handset RAM ... Try to power on handset ... Sending loader to handset RAM ... Unpacking CPU file ... Write CPU file: "W810_R4CK003_ZONE1_STANDARD" SUCCESS: write CPU flash Try to power on handset ... Sending loader to handset RAM ... Unpacking PPM file ... FAILURE: FAILURE: Code no 3003052 Tried to flash W810i and this was the result. Phone works but with mixed R4CK003 and R4DB005 original customization that was on phone? Any clues to error code?

11-16-2006, 17:04	#20 (permalink)
Mr Twitch Freak Poster Join Date: May 2004 Age: 40 Posts: 228 Member: 66748 Status: Offline Thanks: 0 Thanked 1 Time in 1 Post	yesterday logged in ok but today i get invalid ip address have been back to web site to try and reset ip address but it needs 5 days to reset please can you advise?>

11-16-2006, 17:46	#21 (permalink)
power777 Crazy Poster Join Date: Jul 2004 Location: Manila, Philippines Age: 39 Posts: 54 Member: 74097 Status: Offline Thanks: 4 Thanked 18 Times in 12 Posts	Same error invalid IP....whats the problem?

11-16-2006, 18:01	#23 (permalink)
robbie Freak Poster Join Date: May 2001 Location: Europe Posts: 407 Member: 4533 Status: Offline Thanks: 11 Thanked 8 Times in 7 Posts	Can`t flash SE Z530, just before start writing the main flash to the phone, the message appears:"FAILURE: Code no 1961445" Here it is: Start loader from handset flash ... Sending loader to handset RAM ... Try to power on handset ... Sending loader to handset RAM ... Unpacking CPU file ... Write CPU file: "Z530_R6BA030_GENERIC" FAILURE: Code no 1961445

11-16-2006, 18:13	#24 (permalink)
ribbentrop No Life Poster Join Date: Sep 2003 Location: Ukraine Age: 40 Posts: 3,030 Member: 40400 Status: Offline Thanks: 167 Thanked 784 Times in 458 Posts	k300 , read unlock code by UFS Try to power on handset ... Reading handset identificators ... BOOT Signature: A1_DB2010_36_RED CustomerID (flash): 36 Wait handset to power off ... Write loader to handset flash ... FAILURE: Code no 1953707

11-16-2006, 18:59	#25 (permalink)
Siemens man No Life Poster Join Date: Apr 2001 Location: IN CASTLE Age: 35 Posts: 5,809 Member: 3925 Status: Offline Thanks: 61 Thanked 23 Times in 23 Posts	not working.................................

11-16-2006, 19:34	#26 (permalink)
eblaster101 Freak Poster Join Date: Apr 2005 Age: 31 Posts: 313 Member: 136598 Status: Offline Thanks: 10 Thanked 3 Times in 3 Posts	i havent got log but sucesffuly unlocked w810 and k750i cid 36 thanks great tool sometimes buggy when picking up phone thoguh as phone seems to boot