FREE Unlock, NO TESTPOINT, C975 R245_U_82.21.91I (0.6.3.6) using GOT_MOTO - Page 20 - GSM-Forum

wizz25 · 01-05-2007, 22:45

Establish connection to handset
Error: 02020002
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0636
Sending RAMDLD to handset
RAMDLD started ok in handset
Read flash backup from handset
Save flash backup
Power down handset
Establish connection to handset
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0636
Sending RAMDLD to handset
RAMDLD started ok in handset
Set handset to blank mode
Power down handset
Establish connection to handset
FLASH Interface established ok
Bootcore version on handset: 0000
Sending RAMDLD to handset
RAMDLD started ok in handset
Started unlocking sequence
Power down handset
Unlocking sequence completed ok
Establish connection to handset
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0000
Sending RAMDLD to handset
RAMDLD started ok in handset
Try to load backup file
Recover handset from blank mode
Power down handset
Handset recovered from blank mode

WAAAAAAOOOOOOOOOOOOO GREAT TEAAAAAAAAAMMMMMMMMM....

monti_908 · 01-06-2007, 10:24

anybody guide me how can i install the drivers when phone is connected

Afzaal · 01-06-2007, 13:19

For U and For all Other
Just Read Carefully if u don't want to Kill ur Motorola,s with GOT.
----------------------------------------------------------------
90% Damages are being Done Due to Incomplete Driver Installation.
----------------------------------------------------------------
1 #Paste Drivers in x:\Windows\System32\Drivers

2 #Run RSD lite

3 #Connect Phone with PC

Now ur Phone will Install many Drivers.
install All Drivers.

4 # Now Disconnect Phone and Put it in Flash Mode.

5 # Connect again with PC it will install last Drivers

Now U can Do any Job with GOT ...

Best of Luck.

Have a Nice Day...

Code:

anybody  guide me how can i install the drivers when phone is connected

ras · 01-06-2007, 17:17

Hello GOT,
i used GOT to unlock V195 unlock was successful and after that phone reboots,
Restore phone from blank mode was done but same thing. PDS was repaired but no flash file to flash the phone. pls help me.

Furqon · 01-06-2007, 22:14

Hello,

Is GotMoto support A1000 Unlock ?

Thanks

sam786 · 01-06-2007, 22:28

Quote:

Originally Posted by gotsupport

Just flash your phone with this file (posted in first message of this thread):
http://www.got.bz/R245_U_82.21.91I_U...WWW.GOT.BZ.zip

It will be unlocked and upgraded to 91i version. Easy like say "HELLO".

i flashed this phone with the above file. after flash it again says" enter subsidy code-----"

please help me what should i do.thanks again

tonytechgsm · 01-07-2007, 17:22

please can any one tell me how to get soft. and without internet account

tonytechgsm · 01-07-2007, 17:23

please can any one tell me how to get_moto Got soft.

tonytechgsm · 01-07-2007, 17:43

Bros how can I get this soft

Burnt Cobba · 01-07-2007, 20:05

great soft. Tried it on 2 C795s and worked perfectly. What are the prices once the free trial is over pls?

Keep it up guys and thanks

monti_908 · 01-08-2007, 09:37

what can i do for continue with got

::.::RAMJAN::.:: · 01-08-2007, 10:53

Quote:

Originally Posted by monti_908

what can i do for continue with got

read this Thread ........
http://forum.gsmhosting.com/vbb/showthread.php?t=363068

hitibiti · 01-08-2007, 11:54

V980 can't be unlockezd wihout TP , version : R26-U83.38.38.01.01P
This Log :
Establish connection to handset
Switch handset to TCMD interface
Switch handset to FLASH interface
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0631
Sending RAMDLD to handset
RAMDLD started ok in handset
Read flash backup from handset
Save flash backup
Power down handset
Establish connection to handset
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0631
Sending RAMDLD to handset
RAMDLD started ok in handset
Set handset to blank mode
Power down handset
Establish connection to handset
FLASH Interface established ok
Bootcore version on handset: 0000
Sending RAMDLD to handset
RAMDLD started ok in handset
Started unlocking sequence
Power down handset
Unlocking sequence completed ok
Establish connection to handset
FLASH Interface established ok
Read handset bootcore version
Bootcore version on handset: 0000
Sending RAMDLD to handset
RAMDLD started ok in handset
Try to load backup file
Recover handset from blank mode
Power down handset
Handset recovered from blank mode

gotsupport · 01-08-2007, 15:57

@hitibiti:

Your phone is 0631 bootloader.
Unmark BOTH use TP and Easy Skip TP, then goto unlock tab and make Unlock.

canit · 01-08-2007, 16:51

Check it out
http://www.max-online.biz/idevaffili...ate.php?id=804

Looking for a Real Work At Home Job?
Get paid For Completed Work..
No More relying on commissions
Would you like to earn money from home for completing various clerical based projects and assignments from home?
You are not required to sell, or recruit but are simply paid to type ads and other media!

Fillup the below information for further Information.
Name :
E-mail Address :
Phone no:

Call : 2390177 / 9841206820
Check it out
http://www.max-online.biz/idevaffili...ate.php?id=804

01-06-2007, 13:19	#288 (permalink)
Afzaal No Life Poster Join Date: Mar 2005 Location: lets See. Posts: 3,399 Member: 128918 Status: Offline Thanks Meter: 282	For U and For all Other Just Read Carefully if u don't want to Kill ur Motorola,s with GOT. ---------------------------------------------------------------- 90% Damages are being Done Due to Incomplete Driver Installation. ---------------------------------------------------------------- 1 #Paste Drivers in x:\Windows\System32\Drivers 2 #Run RSD lite 3 #Connect Phone with PC Now ur Phone will Install many Drivers. install All Drivers. 4 # Now Disconnect Phone and Put it in Flash Mode. 5 # Connect again with PC it will install last Drivers Now U can Do any Job with GOT ... Best of Luck. Have a Nice Day... Code: anybody guide me how can i install the drivers when phone is connected

01-07-2007, 17:43	#294 (permalink)
tonytechgsm Insane Poster Join Date: Aug 2006 Location: Nigeria Posts: 77 Member: 324833 Status: Offline Thanks Meter: 3	Help Bros how can I get this soft

01-08-2007, 16:51	#300 (permalink)
canit Junior Member Join Date: Jan 2007 Posts: 4 Member: 426925 Status: Offline Thanks Meter: 0	Get it Check it out http://www.max-online.biz/idevaffili...ate.php?id=804 Looking for a Real Work At Home Job? Get paid For Completed Work.. No More relying on commissions Would you like to earn money from home for completing various clerical based projects and assignments from home? You are not required to sell, or recruit but are simply paid to type ads and other media! Fillup the below information for further Information. Name : E-mail Address : Phone no: Call : 2390177 / 9841206820 Check it out http://www.max-online.biz/idevaffili...ate.php?id=804

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
NEED FLAS FILES FOR C975 R245_u_82.21.91i v6.3.6	.:KHALIFA:.	Smart-Clip	2	04-02-2007 11:39
Failed unlock C975 R245_U_82.21.91I *SOLVED	haller	Ultima Box Light	1	02-14-2007 04:43
Succesfull unlocked C975 R245_U_82.21.91I (0.6.3.6)	::.::RAMJAN::.::	Motorola P2k	2	01-04-2007 00:09
C975 R245_u_82.21.91i	Spetsnaz	Motorola Hardware Repair	10	12-25-2006 16:29
C975 R245_U_82.21.91I bootloear 0.5.F.1!	taihv	Motorola P2K (USB-Smart)	1	06-05-2006 07:47

01-05-2007, 22:45	#286 (permalink)
wizz25 No Life Poster Join Date: Dec 2005 Location: ((Gsm-Doctor))... Posts: 3,244 Age: 45 Posts: 661 Member: 209093 Status: Offline Thanks Meter: 154	Establish connection to handset Error: 02020002 FLASH Interface established ok Read handset bootcore version Bootcore version on handset: 0636 Sending RAMDLD to handset RAMDLD started ok in handset Read flash backup from handset Save flash backup Power down handset Establish connection to handset FLASH Interface established ok Read handset bootcore version Bootcore version on handset: 0636 Sending RAMDLD to handset RAMDLD started ok in handset Set handset to blank mode Power down handset Establish connection to handset FLASH Interface established ok Bootcore version on handset: 0000 Sending RAMDLD to handset RAMDLD started ok in handset Started unlocking sequence Power down handset Unlocking sequence completed ok Establish connection to handset FLASH Interface established ok Read handset bootcore version Bootcore version on handset: 0000 Sending RAMDLD to handset RAMDLD started ok in handset Try to load backup file Recover handset from blank mode Power down handset Handset recovered from blank mode WAAAAAAOOOOOOOOOOOOO GREAT TEAAAAAAAAAMMMMMMMMM....

01-06-2007, 10:24	#287 (permalink)
monti_908 No Life Poster Join Date: Nov 2002 Posts: 793 Member: 18262 Status: Offline Thanks Meter: 160	anybody guide me how can i install the drivers when phone is connected

01-06-2007, 17:17	#289 (permalink)
ras Freak Poster Join Date: Aug 2003 Posts: 467 Member: 37362 Status: Offline Thanks Meter: 25	Hello GOT, i used GOT to unlock V195 unlock was successful and after that phone reboots, Restore phone from blank mode was done but same thing. PDS was repaired but no flash file to flash the phone. pls help me.

01-06-2007, 22:14	#290 (permalink)
Furqon Junior Member Join Date: Jul 2006 Posts: 3 Member: 307667 Status: Offline Thanks Meter: 0	Hello, Is GotMoto support A1000 Unlock ? Thanks

01-07-2007, 17:22	#292 (permalink)
tonytechgsm Insane Poster Join Date: Aug 2006 Location: Nigeria Posts: 77 Member: 324833 Status: Offline Thanks Meter: 3	please can any one tell me how to get soft. and without internet account

01-07-2007, 17:23	#293 (permalink)
tonytechgsm Insane Poster Join Date: Aug 2006 Location: Nigeria Posts: 77 Member: 324833 Status: Offline Thanks Meter: 3	please can any one tell me how to get_moto Got soft.

01-07-2007, 20:05	#295 (permalink)
Burnt Cobba No Life Poster Join Date: Apr 2002 Location: The Green Mile Posts: 3,653 Member: 11325 Status: Offline Thanks Meter: 266	great soft. Tried it on 2 C795s and worked perfectly. What are the prices once the free trial is over pls? Keep it up guys and thanks

01-08-2007, 09:37	#296 (permalink)
monti_908 No Life Poster Join Date: Nov 2002 Posts: 793 Member: 18262 Status: Offline Thanks Meter: 160	what can i do for continue with got

01-08-2007, 11:54	#298 (permalink)
hitibiti No Life Poster Join Date: Mar 2003 Location: Canada Age: 44 Posts: 8,146 Member: 24023 Status: Offline Sonork: 100.61317 Thanks Meter: 2,630	V980 can't be unlockezd wihout TP , version : R26-U83.38.38.01.01P This Log : Establish connection to handset Switch handset to TCMD interface Switch handset to FLASH interface FLASH Interface established ok Read handset bootcore version Bootcore version on handset: 0631 Sending RAMDLD to handset RAMDLD started ok in handset Read flash backup from handset Save flash backup Power down handset Establish connection to handset FLASH Interface established ok Read handset bootcore version Bootcore version on handset: 0631 Sending RAMDLD to handset RAMDLD started ok in handset Set handset to blank mode Power down handset Establish connection to handset FLASH Interface established ok Bootcore version on handset: 0000 Sending RAMDLD to handset RAMDLD started ok in handset Started unlocking sequence Power down handset Unlocking sequence completed ok Establish connection to handset FLASH Interface established ok Read handset bootcore version Bootcore version on handset: 0000 Sending RAMDLD to handset RAMDLD started ok in handset Try to load backup file Recover handset from blank mode Power down handset Handset recovered from blank mode

01-08-2007, 15:57	#299 (permalink)
gotsupport Product Supporter Join Date: Nov 2006 Posts: 311 Member: 394070 Status: Offline Thanks Meter: 14	@hitibiti: Your phone is 0631 bootloader. Unmark BOTH use TP and Easy Skip TP, then goto unlock tab and make Unlock.