V195: very weak BT signal after GOT unlock and 00AB_0001 fix - GSM-Forum

Tokoma · 07-14-2008, 22:26

I have unlocked my V195 with GOT, which worked great !

But BT stopped working and have not made a PDS backup.

Using P2KTools, I have set a valid BT address in 00AB_0001 seem.

BT now works but its signal is very week, not more that 30 cm (1 foot).

Please help me.

I could not find any BT address under the battery so I used an address found in your forum. It should be a valid address. Can this be an issue ?

Thanks !

nmas · 11-11-2008, 22:48

if u fixed 00AB seem there is no reason for it to have weak signal, is there any thing to do with your hardware?

nmas · 11-11-2008, 22:48

by the way i modified the 00AB seem on my set to make it work perfectly.

07-14-2008, 22:26	#1 (permalink)
Tokoma Junior Member Join Date: Jul 2008 Posts: 3 Member: 814419 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	V195: very weak BT signal after GOT unlock and 00AB_0001 fix I have unlocked my V195 with GOT, which worked great ! But BT stopped working and have not made a PDS backup. Using P2KTools, I have set a valid BT address in 00AB_0001 seem. BT now works but its signal is very week, not more that 30 cm (1 foot). Please help me. I could not find any BT address under the battery so I used an address found in your forum. It should be a valid address. Can this be an issue ? Thanks !

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
sam.T819 no signal after direct unlock	marshalex1	QUALCOMM Models (3G)	4	12-30-2008 17:33
What's going on Furious Team! LG Viewty lost of Signal after Full unlock!!!	gsmboutiqueinfo	FuriouS TeaM Products	4	11-14-2008 15:38
U830 no signal after flash/unlock	tiggy49	ULT PRO	18	08-14-2008 19:28
N72 No Signal After write rpl and pm	bluffmaster	MT-BOX	3	01-25-2007 11:04
SGH-D600 No Signal After Winimei Unlock	timebomb	Samsung Flashers, Software, Firmware.	2	08-20-2006 10:01

11-11-2008, 22:48	#2 (permalink)
nmas Junior Member Join Date: Nov 2008 Posts: 8 Member: 897918 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	if u fixed 00AB seem there is no reason for it to have weak signal, is there any thing to do with your hardware?

11-11-2008, 22:48	#3 (permalink)
nmas Junior Member Join Date: Nov 2008 Posts: 8 Member: 897918 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	by the way i modified the 00AB seem on my set to make it work perfectly.