21-04-2009 SMTi V17.59 My418x/My419x/My429x/My700x/My700xi Special Service Started - Page 5 - GSM-Forum

mitalica · 04-26-2009, 16:46

Please I have a problem giving my SMTi Please help I thank you with the ********** program v17.59 it m'afiche a message (can not locate path home) after I get my ok soft mafiche it also a message (update download fail )

zullu2004 · 04-27-2009, 06:44

@ mitalica
download from site and run setup manualy

iliya _angelov · 04-27-2009, 21:51

Thanks team..........
Go.....go...............................

shuttle78 · 05-05-2009, 09:15

Greetings! The same problem, help me good advice instead of refer to a manual

tewfik · 05-05-2009, 10:04

in reality this is not an update because no user can not simply unlock my700X.
a real update allows the user to safely release the new mobile and this is not the case

tooko · 05-06-2009, 00:35

Hi,

I have a big problem with the new update, I can't detect PROLIFIC sagem cable by clicking on COM0 SMTI virtual port, do someone have the same problem ? Is there any solution ? Please I have a my400V to unlock but I can't detect it without prolific cable.

Thanks
Best regards

gsminfo · 05-06-2009, 00:42

Quote:

Originally Posted by tooko

Hi,

I have a big problem with the new update, I can't detect PROLIFIC sagem cable by clicking on COM0 SMTI virtual port, do someone have the same problem ? Is there any solution ? Please I have a my400V to unlock but I can't detect it without prolific cable.

Thanks
Best regards

On next update we try repair this problem

SMT

tooko · 05-06-2009, 00:51

Quote:

Originally Posted by gsminfo

On next update we try repair this problem

SMT

I hope it will be solved very soon.

Thanks
Best regards

gsminfo · 05-06-2009, 01:10

I think yes

Now com port detection working correct for FTDI interface only
try use FTDI if you have now .

SMT

cooloxf · 05-10-2009, 10:04

hi got probleme with my810x whene i lanche the programe update i got error mobile not comptaible imei rejete the producte code is the same My810x_252979937

BENCHENA · 05-12-2009, 10:01

what's this problem can 't run software

DZStorm · 05-12-2009, 12:12

@BENCHENA

http://forum.gsmhosting.com/vbb/showthread.php?t=687696

zouli · 05-29-2009, 19:10

Found Phone, Phone Info:
- Phone Type :my419X
- Phone FW :LA5,VH: 100807 1124
- Phone HT :48 28 05
- Phone IMEI :351772011060265
- Prod. Code :252904422
- Board Type :m90

- MSG: UNSUPPORT PHONE PLATFORM

DZStorm · 06-04-2009, 15:30

@zouli

OMAP (M90) boards fully supported just for experts service by (desoldering flach chip) & reading dump that
SMTi server will calculate it for Unlock Code !

mike67 · 06-22-2009, 11:20

SAGTEAM

PLEASE GIVE US THE STE{ BY SEP SOLUTION << I HAVE A PHONE BUT I HAVE NOT REALLY UNDERSTOOD WELL .. REMOVE FLASH CHIP THAN WHAT .. CONNECT PHONE TO THE SOFTWARE AND READ DUMP OR THERE IS A SPECIAL TOOL TO READ DUMP FROM FLASH IC ,.,, PLEASE ELABORATE AS I HAVE V527 to TEST

THANKS
MIKE

04-26-2009, 16:46	#61 (permalink)
mitalica Junior Member Join Date: Apr 2008 Posts: 31 Member: 740801 Status: Offline Sonork: algerie Thanks Meter: 2	help me Please I have a problem giving my SMTi Please help I thank you with the ********** program v17.59 it m'afiche a message (can not locate path home) after I get my ok soft mafiche it also a message (update download fail ) Last edited by mitalica; 04-26-2009 at 16:56.

05-06-2009, 00:35	#66 (permalink)
tooko Freak Poster Join Date: Aug 2004 Location: WORLDWIDE Posts: 227 Member: 78516 Status: Offline Thanks Meter: 62	Problem detecting ComPort Hi, I have a big problem with the new update, I can't detect PROLIFIC sagem cable by clicking on COM0 SMTI virtual port, do someone have the same problem ? Is there any solution ? Please I have a my400V to unlock but I can't detect it without prolific cable. Thanks Best regards

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem in the installation of the Rescue SMTi V17.59	hkattab	SMTi	10	05-06-2009 00:45
SMTi Ver 17.59 my418x,my419x,my429x,my700x,my700xi Special Service Started	gsminfo	Service Products News & Updates	0	04-22-2009 07:36
21-04-2009 SMTi V17.59 My418x/My419x/My429x/My700x/My700xi Special Service Started	DZStorm	Service Products News & Updates	0	04-21-2009 15:47
21-08-2007 SMTi v17.45 my411Ci Flash Service Added	DZStorm	SMTi	5	08-22-2008 13:38
21-08-2007 SMTi v17.45 my411Ci Flash Service Added	DZStorm	Service Products News & Updates	0	08-21-2008 14:03

04-27-2009, 06:44	#62 (permalink)
zullu2004 No Life Poster Join Date: May 2005 Location: Timisoara Age: 43 Posts: 641 Member: 146635 Status: Offline Sonork: 100.1651273 Thanks Meter: 261	@ mitalica download from site and run setup manualy

04-27-2009, 21:51	#63 (permalink)
iliya _angelov No Life Poster Join Date: Nov 2008 Location: bulgaria Posts: 737 Member: 903701 Status: Offline Sonork: leo7 Thanks Meter: 119	Thanks team.......... Go.....go...............................

05-05-2009, 09:15	#64 (permalink)
shuttle78 Junior Member Join Date: May 2009 Posts: 4 Member: 1024605 Status: Offline Thanks Meter: 0	Greetings! The same problem, help me good advice instead of refer to a manual

05-05-2009, 10:04	#65 (permalink)
tewfik Freak Poster Join Date: Jun 2005 Posts: 390 Member: 149975 Status: Offline Thanks Meter: 37	in reality this is not an update because no user can not simply unlock my700X. a real update allows the user to safely release the new mobile and this is not the case

05-06-2009, 01:10	#69 (permalink)
gsminfo No Life Poster Join Date: Mar 2003 Location: Poland Age: 53 Posts: 5,680 Member: 23714 Status: Offline Thanks Meter: 18,769	I think yes Now com port detection working correct for FTDI interface only try use FTDI if you have now . SMT

05-10-2009, 10:04	#70 (permalink)
cooloxf No Life Poster Join Date: Feb 2005 Location: twitter home Posts: 2,136 Member: 120893 Status: Offline Thanks Meter: 69	hi got probleme with my810x whene i lanche the programe update i got error mobile not comptaible imei rejete the producte code is the same My810x_252979937

05-12-2009, 12:12	#72 (permalink)
DZStorm No Life Poster Join Date: Jul 2005 Location: TUNISIA Age: 44 Posts: 2,563 Member: 160204 Status: Offline Sonork: 100.113150 Thanks Meter: 2,843	@BENCHENA http://forum.gsmhosting.com/vbb/showthread.php?t=687696

05-29-2009, 19:10	#73 (permalink)
zouli Insane Poster Join Date: Oct 2002 Location: France Age: 58 Posts: 89 Member: 16113 Status: Offline Thanks Meter: 4	Found Phone, Phone Info: - Phone Type :my419X - Phone FW :LA5,VH: 100807 1124 - Phone HT :48 28 05 - Phone IMEI :351772011060265 - Prod. Code :252904422 - Board Type :m90 - MSG: UNSUPPORT PHONE PLATFORM

06-04-2009, 15:30	#74 (permalink)
DZStorm No Life Poster Join Date: Jul 2005 Location: TUNISIA Age: 44 Posts: 2,563 Member: 160204 Status: Offline Sonork: 100.113150 Thanks Meter: 2,843	@zouli OMAP (M90) boards fully supported just for experts service by (desoldering flach chip) & reading dump that SMTi server will calculate it for Unlock Code !

06-22-2009, 11:20	#75 (permalink)
mike67 No Life Poster Join Date: Nov 2005 Location: USA Posts: 1,163 Member: 197538 Status: Offline Thanks Meter: 97	SAGTEAM PLEASE GIVE US THE STE{ BY SEP SOLUTION << I HAVE A PHONE BUT I HAVE NOT REALLY UNDERSTOOD WELL .. REMOVE FLASH CHIP THAN WHAT .. CONNECT PHONE TO THE SOFTWARE AND READ DUMP OR THERE IS A SPECIAL TOOL TO READ DUMP FROM FLASH IC ,.,, PLEASE ELABORATE AS I HAVE V527 to TEST THANKS MIKE