Flashing GD68, but can't power on, GD67_fixed solution can't help - GSM-Forum

pc.net · 11-24-2003, 07:41

Flashing GD68, but can't power on, GD67_fixed solution can't help.
Any ideas???

unlockmax · 11-24-2003, 21:24

Try to flash it with WinDoModo boot - main - language
Regards

pc.net · 11-25-2003, 11:02

I did try it long time ago.
but thanks

Syed · 11-25-2003, 16:35

try to flash it with A33 version...
also check if u can charge the phone or not ???
and try to read the phone with CB2000, if u get IMEI Error then the eeprom of the phone is bad....

WBR
Syed

Don Cobra · 11-26-2003, 01:00

I thank you seek the pack languague a33 in French

pc.net · 11-26-2003, 07:29

your solutions not work

igorexa · 01-26-2004, 23:23

does anybody have solution for repair eprom ? two phones say read imei fail. after changing their flahs chip (place to place).they are flashing but not power on.before change chip they was working(29 rus ver both)

Syed · 01-27-2004, 07:47

Quote:

Originally Posted by igorexa

does anybody have solution for repair eprom ? two phones say read imei fail. after changing their flahs chip (place to place).they are flashing but not power on.before change chip they was working(29 rus ver both)

It does not work after changing flash chip...if u plan to swap flash IC then u got to swap the same CPU as well !!

WBR
Syed

igorexa · 02-01-2004, 11:55

ok i have change cpu on both phone place to place so phones starts .but in one phones fault going with cpu.i need to change cpu .what can i do ,phone will no start with new cpu!!!!

11-24-2003, 07:41	#1 (permalink)
pc.net Freak Poster Join Date: Nov 2002 Location: Mars Age: 55 Posts: 284 Member: 17659 Status: Offline Thanks Meter: 0	Flashing GD68, but can't power on, GD67_fixed solution can't help Flashing GD68, but can't power on, GD67_fixed solution can't help. Any ideas???

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help Nokia 3310 Flash Ok But Not Power On	sofiame2006	Nokia Hardware & Hardware Repair	20	01-28-2011 14:36
help nokia 3100 flash ok but not power on	sofiame2006	Nokia Hardware & Hardware Repair	7	09-24-2007 18:11
help me 6600 flash ok but not power on	kirpiksk	Nokia Hardware & Hardware Repair	2	08-09-2006 06:12
V500 flash completed but not power on. Help	fromdesert	Motorola P2k	1	12-10-2005 11:30
help samsung e700 flash ok but not power on	sofiame2006	Samsung Hardware Repair	0	11-11-2005 09:28

11-24-2003, 21:24	#2 (permalink)
unlockmax Freak Poster Join Date: May 2003 Posts: 271 Member: 30174 Status: Offline Thanks Meter: 5	Try to flash it with WinDoModo boot - main - language Regards

11-25-2003, 11:02	#3 (permalink)
pc.net Freak Poster Join Date: Nov 2002 Location: Mars Age: 55 Posts: 284 Member: 17659 Status: Offline Thanks Meter: 0	I did try it long time ago. but thanks

11-25-2003, 16:35	#4 (permalink)
Syed No Life Poster Join Date: Jan 2003 Location: Hong Kong. Age: 47 Posts: 3,092 Member: 19979 Status: Offline Thanks Meter: 116	try to flash it with A33 version... also check if u can charge the phone or not ??? and try to read the phone with CB2000, if u get IMEI Error then the eeprom of the phone is bad.... WBR Syed

11-26-2003, 01:00	#5 (permalink)
Don Cobra Junior Member Join Date: Nov 2003 Posts: 2 Member: 44726 Status: Offline Thanks Meter: 0	I thank you seek the pack languague a33 in French

11-26-2003, 07:29	#6 (permalink)
pc.net Freak Poster Join Date: Nov 2002 Location: Mars Age: 55 Posts: 284 Member: 17659 Status: Offline Thanks Meter: 0	your solutions not work

01-26-2004, 23:23	#7 (permalink)
igorexa Junior Member Join Date: Jan 2003 Location: russia Age: 49 Posts: 19 Member: 19764 Status: Offline Thanks Meter: 1	does anybody have solution for repair eprom ? two phones say read imei fail. after changing their flahs chip (place to place).they are flashing but not power on.before change chip they was working(29 rus ver both)

02-01-2004, 11:55	#9 (permalink)
igorexa Junior Member Join Date: Jan 2003 Location: russia Age: 49 Posts: 19 Member: 19764 Status: Offline Thanks Meter: 1	ok i have change cpu on both phone place to place so phones starts .but in one phones fault going with cpu.i need to change cpu .what can i do ,phone will no start with new cpu!!!!