Flashing with Winmodo, Please help. - GSM-Forum

djdunlock · 11-05-2001, 14:21

Sorry, i am newbie in this section, i need your help so much. I dont see any solution here about hardware what i need for flashing panasonic30,50... with winmodo. I have soft, notbook and suitable cable but i dont know how can i use winmodo. I start program, set parameters, run flashing and NOTHING, still answer that "signaling..." What i am doing wrong? I need another cable, another machine .....? I unlock one gd50 with Viknet 1.1 (after 20-th trying) with success, but flashing NO CHANCE. ANY solution about flashing with WInmodo is very interested for me (but not just for me). Thax so much. Bye.

sprite · 11-05-2001, 19:54

Hi, Download <a href="http://www.webhely.hu/sprite/Winmododoc.zip" target="_blank">WinmodoPlus User Documentation</a>

regards sprite

djdunlock · 11-06-2001, 12:16

Thax so much sprite, for Your private mail message too. Bye.

trying · 02-18-2004, 16:40

Does anyone know where I can get a copy of winmododoc.zip to know how to use winmodo to flash a GD50.

It says 'waiting for mobile signal...' but when I connect the phone, nothing happens. I did a GD90 many years ago and I remember the phone had to have its LED illuminated before connecting. How can I achieve this? I've tried using the DOS flasher for g450 and gd90 to get LED on but it doesnt do it.

Please help. Thanks!

Jiminay2000 · 02-18-2004, 17:34

just press power buuton

trying · 02-18-2004, 20:45

Hitting the power key does nothing. Holding the power key down just turns the phone on. Software makes no response at all. I have tried 3 different interfaces/leads. I know the leads are good as they work with the GD90.

11-05-2001, 14:21	#1 (permalink)
djdunlock No Life Poster Join Date: Jul 2001 Location: East Europe Age: 54 Posts: 918 Member: 5452 Status: Offline Thanks Meter: 1	Flashing with Winmodo, Please help. Sorry, i am newbie in this section, i need your help so much.<br />I dont see any solution here about hardware what i need for flashing panasonic30,50... with winmodo. I have soft, notbook and suitable cable but i dont know how can i use winmodo. I start program, set parameters, run flashing and NOTHING, still answer that "signaling..." What i am doing wrong?<br />I need another cable, another machine .....?<br />I unlock one gd50 with Viknet 1.1 (after 20-th trying) with success, but flashing NO CHANCE.<br />ANY solution about flashing with WInmodo is very interested for me (but not just for me).<br />Thax so much.<br />Bye.

11-05-2001, 19:54	#2 (permalink)
sprite Crazy Poster Join Date: Aug 2001 Age: 53 Posts: 56 Member: 5967 Status: Offline Thanks Meter: 0	Hi,<br />Download <a href="http://www.webhely.hu/sprite/Winmododoc.zip" target="_blank">WinmodoPlus User Documentation</a> regards<br />sprite

11-06-2001, 12:16	#3 (permalink)
djdunlock No Life Poster Join Date: Jul 2001 Location: East Europe Age: 54 Posts: 918 Member: 5452 Status: Offline Thanks Meter: 1	Thax so much sprite, for Your private mail message too.<br />Bye.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
z600 freezing after flash with UFS, please help!	KUBAT1	UFS2 + UFS3-Tornadoflasher	0	06-30-2005 18:32
z600 freezing after flash with UFS, please help!	KUBAT1	Sony Ericsson	0	06-30-2005 18:29
NEC e616 freezing after flash with crazzy-please help	shotbyuzi	NEC	14	04-02-2005 18:09
i cant write flash with uspu !!!! please help......	emmibox	Alcatel & TCL Old Models	3	11-17-2000 22:08

02-18-2004, 16:40	#4 (permalink)
trying Junior Member Join Date: Feb 2004 Posts: 7 Member: 52102 Status: Offline Thanks Meter: 0	Does anyone know where I can get a copy of winmododoc.zip to know how to use winmodo to flash a GD50. It says 'waiting for mobile signal...' but when I connect the phone, nothing happens. I did a GD90 many years ago and I remember the phone had to have its LED illuminated before connecting. How can I achieve this? I've tried using the DOS flasher for g450 and gd90 to get LED on but it doesnt do it. Please help. Thanks!

02-18-2004, 17:34	#5 (permalink)
Jiminay2000 No Life Poster Join Date: May 2003 Location: Ru Age: 48 Posts: 539 Member: 29155 Status: Offline Thanks Meter: 15	just press power buuton

02-18-2004, 20:45	#6 (permalink)
trying Junior Member Join Date: Feb 2004 Posts: 7 Member: 52102 Status: Offline Thanks Meter: 0	Hitting the power key does nothing. Holding the power key down just turns the phone on. Software makes no response at all. I have tried 3 different interfaces/leads. I know the leads are good as they work with the GD90.