GD35 problem - flashing stoped 21%... - GSM-Forum

brinki · 08-14-2003, 02:36

Hi!

I unlocked GD35 with soft GTool v2.0
When soft flashed phone - at 21% say ERROR.
I try flashing again, but again I get ERROR.
I don't put out BATTERY from phone!!!
I try reflash phone with WinMoDo...everithing O.K., but while flashing at 385Kb, soft say SENDING ERROR.
I try unlock soft GD35-95 by SKEPTIK - i get error at mobile display about 20% flashing...

When I put ot battery a put it back, phone don't power on.
When I run again flashing - phone flashing, but still end at the same point.

Can you HELP ME somebody?
How reflash correct phone?

PS: I clean phone conector and connector on phone board.

Thanx

brinki

Sorry for bad english...

mtony969 · 08-14-2003, 11:34

if you have removed the battery then no hope never remove no matter what happens

brinki · 08-14-2003, 14:25

I think probably flash chip into phone is BAD...

brinki

Sandman · 08-14-2003, 16:26

please read old post regarding DEAD PANASONIC PHONES...

brinki · 08-14-2003, 21:36

Quote:

Originally posted by Sandman
please read old post regarding DEAD PANASONIC PHONES...

I read old post now. I find solution for dead panasonic, but it is very difficult. I will try it with my friend.

brinki

dragoss · 08-15-2003, 21:40

if the flash is stopped at 21%, battery is not charged
the battery must be full charged.
charge the battery separatly and try again to flash it;
it will be work

brinki · 08-15-2003, 22:35

Quote:

Originally posted by dragoss
if the flash is stopped at 21%, battery is not charged
the battery must be full charged.
charge the battery separatly and try again to flash it;
it will be work

I will try charge batery in other GD35.
I send result...

Thanx

brinki

brinki · 08-16-2003, 10:09

I charged batery to 100%.
I try flash again, but with the same problem

Thanx for all...

brinki

Crew · 08-16-2003, 10:40

hardware problem
try to resolder flash
or change it if problem
persist

WBR
Crew

dragoss · 08-17-2003, 07:11

also must to be soft problem. pls verify your binnary used to flash your phone if it is ok. try to flash with another complete binnary

Syed · 08-17-2003, 07:40

This is hardware problem...flash is dry reflow the flash and then try flashing again......

WBR
Syed

08-14-2003, 02:36	#1 (permalink)
brinki Freak Poster Join Date: Mar 2001 Location: Slovakia Posts: 233 Member: 3835 Status: Offline Thanks Meter: 1	GD35 problem - flashing stoped 21%... Hi! I unlocked GD35 with soft GTool v2.0 When soft flashed phone - at 21% say ERROR. I try flashing again, but again I get ERROR. I don't put out BATTERY from phone!!! I try reflash phone with WinMoDo...everithing O.K., but while flashing at 385Kb, soft say SENDING ERROR. I try unlock soft GD35-95 by SKEPTIK - i get error at mobile display about 20% flashing... When I put ot battery a put it back, phone don't power on. When I run again flashing - phone flashing, but still end at the same point. Can you HELP ME somebody? How reflash correct phone? PS: I clean phone conector and connector on phone board. Thanx brinki Sorry for bad english...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K608i FS FLASH STOPING ON 98%	Nasmi	Cruiser Suite	9	09-26-2006 10:29
n343i flashing stoped!	CLIFFORD25502	Infinity-Box	2	02-04-2006 13:07
GD35 Problem	xxxpaga	Panasonic	4	05-26-2002 21:41
GD35 lg flash	ARS	Panasonic	1	04-01-2002 02:39
gd35 original flash for WinMoDo	januszn	Panasonic	0	01-29-2002 22:16

08-14-2003, 11:34	#2 (permalink)
mtony969 No Life Poster Join Date: Mar 2003 Location: england Age: 65 Posts: 3,035 Member: 24552 Status: Offline Thanks Meter: 13	if you have removed the battery then no hope never remove no matter what happens

08-14-2003, 14:25	#3 (permalink)
brinki Freak Poster Join Date: Mar 2001 Location: Slovakia Posts: 233 Member: 3835 Status: Offline Thanks Meter: 1	I think probably flash chip into phone is BAD... brinki

08-14-2003, 16:26	#4 (permalink)
Sandman No Life Poster Join Date: Nov 2001 Location: Never Land Posts: 924 Member: 7277 Status: Offline Sonork: 100.42158 Thanks Meter: 68	please read old post regarding DEAD PANASONIC PHONES...

08-15-2003, 21:40	#6 (permalink)
dragoss Crazy Poster Join Date: Jun 2003 Location: iasi, romania Age: 48 Posts: 51 Member: 32866 Status: Offline Thanks Meter: 1	if the flash is stopped at 21%, battery is not charged the battery must be full charged. charge the battery separatly and try again to flash it; it will be work

08-16-2003, 10:09	#8 (permalink)
brinki Freak Poster Join Date: Mar 2001 Location: Slovakia Posts: 233 Member: 3835 Status: Offline Thanks Meter: 1	I charged batery to 100%. I try flash again, but with the same problem Thanx for all... brinki

08-16-2003, 10:40	#9 (permalink)
Crew No Life Poster Join Date: May 2000 Location: Russia Moscow Age: 59 Posts: 2,109 Member: 1408 Status: Offline Thanks Meter: 39	hardware problem try to resolder flash or change it if problem persist WBR Crew

08-17-2003, 07:11	#10 (permalink)
dragoss Crazy Poster Join Date: Jun 2003 Location: iasi, romania Age: 48 Posts: 51 Member: 32866 Status: Offline Thanks Meter: 1	also must to be soft problem. pls verify your binnary used to flash your phone if it is ok. try to flash with another complete binnary

08-17-2003, 07:40	#11 (permalink)
Syed No Life Poster Join Date: Jan 2003 Location: Hong Kong. Age: 47 Posts: 3,092 Member: 19979 Status: Offline Thanks Meter: 116	This is hardware problem...flash is dry reflow the flash and then try flashing again...... WBR Syed