For:HADAK1-Dead GD52 - GSM-Forum

starpho · 03-29-2001, 22:40

I also posted a message before the couple days.Did you try something else to do with your dead GD52.Tomorrow I will get one more GD52,and maybe try to do the same thing what I´ve done with dead C25.I mean, use one phone working,start Winmodo and before that program starts erasing the Flash,put the cable to another one.I supose that is very important to not turn off the first phone if you want keep it alive.Maybe it sounds very stupid and is posible that you will kill that phone.There is the OTHER solution but I will try it only if I see that other don´t exist.The other solution is to open the phone,desolder the FLASH and after that flash it with existed files.Yes I know ,it is very,very comlicated but I´m sure that it must work.Regards,and if you have some news,please put it here or send me an I-mail!!!

hadak1 · 04-02-2001, 07:29

Hi Starpho!
I tried your solution ! the one about starting winmodo with a working phone and continuing with the dead one ! oops, the connetion breaks and winmodo hangs ! same with LongDaddy and UnGD52 crackied by Xak ! I think the only solution left is to open the phone but i'm not in a hurry !!! if you come across any working solution, please let me know.
imhere@ifrance.com

**Bert** · 04-02-2001, 11:29

Hi
Ofcourse you can not use that methods ,bcoz pana phone have to enable the test mode after the program send the algorithm the start flashing or other services. or phone will not reconize programing commands.

may be smb can make a bootloader like the old new gd90 algorithm loader, then try to foced flash gd52, what do you think?

good luck!

dito · 04-02-2001, 16:23

I think they use the same processorso maybe old bootloader works...

starpho · 04-02-2001, 23:54

Hi!I´ve tried everithing what I know and nothing helps.I supose that the only problem is how to put the phone into the flash mode.For now only what we can do is wait,but how long.If somebody knows anything what could helps,please post it here.Best regards!!!

hadak1 · 04-03-2001, 11:16

which old bootloaders are you talking about, Dito !

hadak1 · 04-07-2001, 22:58

I tried the last soft from MOP's page, same result: phone is not detected. I started the soft with a working soft, disonnected the phone and connected the dead one, the soft continued writing till 100% but the phone is still dead... Any idea how to make flashing soft (Winmodo or GD52 unlockers) detect this phone will be very welcome !!! thanks a lot

03-29-2001, 22:40	#1 (permalink)
starpho Freak Poster Join Date: Aug 2000 Posts: 148 Member: 1904 Status: Offline Thanks: 2 Thanked 3 Times in 3 Posts	For:HADAK1-Dead GD52 I also posted a message before the couple days.Did you try something else to do with your dead GD52.Tomorrow I will get one more GD52,and maybe try to do the same thing what I´ve done with dead C25.I mean, use one phone working,start Winmodo and before that program starts erasing the Flash,put the cable to another one.I supose that is very important to not turn off the first phone if you want keep it alive.Maybe it sounds very stupid and is posible that you will kill that phone.There is the OTHER solution but I will try it only if I see that other don´t exist.The other solution is to open the phone,desolder the FLASH and after that flash it with existed files.Yes I know ,it is very,very comlicated but I´m sure that it must work.Regards,and if you have some news,please put it here or send me an I-mail!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Dead GD52 after "panasonic gd52 imei unlocker"	brinki	Panasonic	8	06-16-2001 10:31
Please help!I need the real solution for dead GD52!!!	starpho	Panasonic	0	04-27-2001 04:21
Hadak1-Did you found the solution for dead GD52???	starpho	Panasonic	3	04-16-2001 00:27
Need the real solution for dead gd52???	starpho	Panasonic	0	03-28-2001 00:36
Dead GD52	hadak1	Panasonic	3	03-26-2001 07:37

04-02-2001, 07:29	#2 (permalink)
hadak1 Freak Poster Join Date: Apr 2000 Location: Paris Posts: 194 Member: 1180 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Hi Starpho! I tried your solution ! the one about starting winmodo with a working phone and continuing with the dead one ! oops, the connetion breaks and winmodo hangs ! same with LongDaddy and UnGD52 crackied by Xak ! I think the only solution left is to open the phone but i'm not in a hurry !!! if you come across any working solution, please let me know. imhere@ifrance.com

04-02-2001, 11:29	#3 (permalink)
Bert Product Manager Join Date: Oct 1999 Location: Hong Kong Posts: 1,462 Member: 596 Status: Offline Sonork: 100.33096 Thanks: 53 Thanked 352 Times in 47 Posts	Hi Ofcourse you can not use that methods ,bcoz pana phone have to enable the test mode after the program send the algorithm the start flashing or other services. or phone will not reconize programing commands. may be smb can make a bootloader like the old new gd90 algorithm loader, then try to foced flash gd52, what do you think? good luck!

04-02-2001, 16:23	#4 (permalink)
dito No Life Poster Join Date: Jan 2000 Posts: 506 Member: 860 Status: Offline Thanks: 3 Thanked 1 Time in 1 Post	I think they use the same processorso maybe old bootloader works...

04-02-2001, 23:54	#5 (permalink)
starpho Freak Poster Join Date: Aug 2000 Posts: 148 Member: 1904 Status: Offline Thanks: 2 Thanked 3 Times in 3 Posts	Hi!I´ve tried everithing what I know and nothing helps.I supose that the only problem is how to put the phone into the flash mode.For now only what we can do is wait,but how long.If somebody knows anything what could helps,please post it here.Best regards!!!

04-03-2001, 11:16	#6 (permalink)
hadak1 Freak Poster Join Date: Apr 2000 Location: Paris Posts: 194 Member: 1180 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	which old bootloaders are you talking about, Dito !

04-07-2001, 22:58	#7 (permalink)
hadak1 Freak Poster Join Date: Apr 2000 Location: Paris Posts: 194 Member: 1180 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	I tried the last soft from MOP's page, same result: phone is not detected. I started the soft with a working soft, disonnected the phone and connected the dead one, the soft continued writing till 100% but the phone is still dead... Any idea how to make flashing soft (Winmodo or GD52 unlockers) detect this phone will be very welcome !!! thanks a lot