Hhheeelllllpppp Gd52 !!!!! - GSM-Forum

DJ_Andy · 05-15-2002, 04:29

Hi! I have a Panasonic GD52, nice phone, but the old bat was finished. the problem is that the boy ho had the phone before, was to an unlocker and this stupid, the unlocker, reset the phone. After that all the factory settings are activated and now I have a good bat the BAT TEMP, BAT VOLT HIGH, BAT VOLT LOW, are the factory settings, not the good ones.
I really please someone ho has a GD52 (good phone, no unlocking or software upgrade) to read it with chan box, the service software, and record the values for the bat.
I have read the Service Manual but the calibration is verry hard to do it if you don't have all the things listed there.

P.S. In cha box press F7 and select something with Trim others. After that a new window will apear with some values including the bat values, but i need all the values from this windows because my phone was reseted.

Best regards! And hope that someone will help me!

Haitham224 · 05-16-2002, 00:43

hi man
just contact me i will helpyou icq :109341428
[email protected]
regards

tomi_no · 05-16-2002, 19:16

Try this

BTemp 255
High 627
Low 447
DacRef 463

BR Tomi

DJ_Andy · 05-17-2002, 20:38

Thank you guys! I will try the settings and I'll replay!

05-15-2002, 04:29	#1 (permalink)
DJ_Andy Freak Poster Join Date: Apr 2002 Location: Romania Age: 41 Posts: 250 Member: 11445 Status: Offline Thanks Meter: 0	Hhheeelllllpppp Gd52 !!!!! Hi! I have a Panasonic GD52, nice phone, but the old bat was finished. the problem is that the boy ho had the phone before, was to an unlocker and this stupid, the unlocker, reset the phone. After that all the factory settings are activated and now I have a good bat the BAT TEMP, BAT VOLT HIGH, BAT VOLT LOW, are the factory settings, not the good ones. I really please someone ho has a GD52 (good phone, no unlocking or software upgrade) to read it with chan box, the service software, and record the values for the bat. I have read the Service Manual but the calibration is verry hard to do it if you don't have all the things listed there. P.S. In cha box press F7 and select something with Trim others. After that a new window will apear with some values including the bat values, but i need all the values from this windows because my phone was reseted. Best regards! And hope that someone will help me!

05-17-2002, 20:38	#4 (permalink)
DJ_Andy Freak Poster Join Date: Apr 2002 Location: Romania Age: 41 Posts: 250 Member: 11445 Status: Offline Thanks Meter: 0	THX! Thank you guys! I will try the settings and I'll replay!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I would like to buy unlock clip for Panasonic GD52/92/93.	FreeGSM Team	Main Sales Section	3	07-03-2001 18:07
Dead GD52 after "panasonic gd52 imei unlocker"	brinki	Panasonic	8	06-16-2001 10:31
Exchange..I have panasonic GD52/92/93 unlocker,lang.flasher,full EMMI sw,sheme...	michael57	x1x to x45/x50	0	03-06-2001 22:38
Exchange...I have Panasonic GD52/92/93 unlocker and lang.flasher,full EMMI sw,sheme..	michael57	Exchange Section	0	03-06-2001 22:36
BE4 137 vs GD52	vampire	Alcatel & TCL Old Models	0	03-01-2001 23:01

05-16-2002, 00:43	#2 (permalink)
Haitham224 Freak Poster Join Date: May 2002 Location: egypt Age: 45 Posts: 144 Member: 11554 Status: Offline Thanks Meter: 0	hi man just contact me i will helpyou icq :109341428 [email protected] regards

05-16-2002, 19:16	#3 (permalink)
tomi_no Freak Poster Join Date: Feb 2000 Location: Slovakia Age: 53 Posts: 320 Member: 965 Status: Offline Thanks Meter: 36	Try this BTemp 255 High 627 Low 447 DacRef 463 BR Tomi