GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > GSM & CDMA Phones / Tablets Software & Hardware Area > Various > Panasonic

Panasonic Panasonic-News...

Reply
 
LinkBack Thread Tools Display Modes
Old 01-04-2002, 14:00   #1 (permalink)
Junior Member
 
Join Date: Jan 2002
Location: PL
Posts: 37
Member: 8305
Status: Offline
Thanks Meter: 0
Post pana gd30 and Unautorized...


I have pana gd 30 with this problem. I try repair this with solution and "GD50 repair&unlock by viknet". I repeat this steps all day, but it doesn't work. Please help... I need flash for gd 30, where can I find this.
  Reply With Quote
Old 01-04-2002, 23:34   #2 (permalink)
legija
Guest
 
Posts: n/a
Member:
Post

Hi there !<br />Once. i think in last 6 monts, i also have problem like you ...<br />And, carefuly repeated this steps:<br />--------------------------------------------------<br />"<br />1.RUN program "GD50 repair&unlock by viknet v1.0 "

2.press "set test mode" and ON phone..phone goes test mode..<br />you will see IMEI and SERIAL..you can enter any ...<br />for example

IMEI : 555555555555555 (you don't need change original IMEI)<br />SERIAL:IIIIIIIIIIIIII ( this is important only 14 "I")

3. press "Repair and Unlock"<br />you will see again warning message..

repeat this steps Until you see (~ 11- 13 x Unlock & Repair)

IMEI: FFFFFFFFFFFFFF0<br />SERIAL:yyyyyyyyyyyy

that is very important..<br />at this point you will enter

IMEI : 449121882548521<br />SERIAL : 125005687236501

and press "Repair and Unlock"<br />phoen lights will up..and nothing on the screen..

Phone is dead now & you can repair this with NEO Unlocker & Restorer v7.3

Phone is LIVE & Unlocked but have another IMEI.

If you need original IMEI , you must Flash this phone with version a09<br />& change IMEI with NEO's soft.

Regards, <br />Zippo."<br />-------------------------------------------------<br />And, nothing hapened...<br />So, there is solution:

You just need to do this:

1.RUN program "GD50 repair&unlock by viknet v1.0 "

2.press "set test mode" and ON phone..phone goes test mode..

enter this numbers in progy,<br />IMEI : 449121882548521<br />SERIAL : 125005687236501<br />and then, when phone restart and display something like "unaut..."<br />start NEO Unlocker & Restorer v7.3...<br />Regards !<br />PS I'v fu**** up my phone with Andromeda soft !
  Reply With Quote
Old 01-05-2002, 01:18   #3 (permalink)
No Life Poster
 
Join Date: Nov 2001
Location: Europe
Posts: 586
Member: 7690
Status: Offline
Thanks Meter: 4
Panasonic GD30/GD50 SW A08...A14 <br />Unlock solution & Unauthorized Detection:

1. Start Viknet1.0 & press "Set test mode" power on phone.<br />2. Click "Repair & unlock"<br />3. Click "Exit" but don't shut down phone.<br />4. Shot down phone<br />5. Restart Viknet1.0 & press "Set test mode" & "Repair & unlock".<br /> Until at imei you see "FFFFFFFFF0" and at serial y with dots.<br />6. Now click "Exit" & shut down phone.<br />7. Run NEO's v7.3, select the COM where is your box,<br /> at right write GD50 or GD30, click "Restore", & power on the phone.<br />8. Wait to fill at full the blue tape and hear two beeps from phone.<br />9. Power off and on the phone, that's all.

100% working<br />tested by me

Best Regards<br />[email protected] <img src="eek.gif" border="0"> <img src="eek.gif" border="0"> <img src="eek.gif" border="0">
  Reply With Quote
Old 01-05-2002, 02:38   #4 (permalink)
Freak Poster
 
dollyb's Avatar
 
Join Date: Sep 2000
Location: Hungary
Age: 42
Posts: 183
Member: 2208
Status: Offline
Thanks Meter: 1
use uspu 4.38<br />upload a09 flash<br />use panaandromeda<br />write right imei<br />voila:-))))))))))

dollyb
  Reply With Quote
Old 01-05-2002, 19:56   #5 (permalink)
No Life Poster
 
OMBOSSMAN's Avatar
 
Join Date: Dec 2001
Location: [☾✫ ]
Age: 54
Posts: 2,141
Member: 8159
Status: Offline
Thanks Meter: 98
Thumbs up

Hi to all.. Most of people asking about how to reapir GD-30 with<br /> message " WARNING unauthorized action detected"..<br /> to repair this phone follow steps below..

1.RUN program "GD50 repair&unlock by viknet v1.1 "

2.press "set test mode" and ON phone..phone goes test mode..<br />you will see IMEI and SERIAL..you can enter any ...for example

IMEI : 555555555555555<br />SERIAL:IIIIIIIIIIIIII

3. press "Repair and Unlock"<br />you will see again warning message..

repeat this steps Until you see [for me it was about 20 times]<br />IMEI: FFFFFFFFFFFFFF0<br />SERIAL:yyyyyyyyyyyy

that is very important..at this point you will<br />need to RUN program "NEO's GD30-50 Unlocker v7.3", next fill editbox<br />with "GD30" (if you are repairing GD30) or "GD50" (you know when)

<br />and press RESTORE. The progress bar should go to 100% and the phone<br />should "beep" two times. Phone working!

If you have GD30 and that solution is not working - flash it with USPU.<br />Solution is tested on few GD30 (first flashed with USPU) and one GD50 vA14.<br />OMBOSSMAN
  Reply With Quote
Old 01-07-2002, 11:53   #6 (permalink)
Junior Member
 
Join Date: Jan 2002
Location: PL
Posts: 37
Member: 8305
Status: Offline
Thanks Meter: 0
Angry

How long i must wait to "fill at full the blue tape and hear two beeps from phone". It feld 50% and stoped. I'm waiting 15 min and NOTHING happens.

<FONT COLOR="#ffff00" SIZE="1">[ 07 January 2002 12:28: Message edited by: MrHW ]</font>
  Reply With Quote
Old 01-07-2002, 11:54   #7 (permalink)
Junior Member
 
Join Date: Jan 2002
Location: PL
Posts: 37
Member: 8305
Status: Offline
Thanks Meter: 0
Angry

I'm waiting 15 min and NOTHING happens.
  Reply With Quote
Old 01-08-2002, 00:43   #8 (permalink)
Insane Poster
 
Join Date: Dec 2001
Location: Turkey
Posts: 66
Member: 8187
Status: Offline
Thanks Meter: 0
Post

hi all,

<br />This solution is not working. I tryed my GD30.

Use USPU 4.38 flash A09.

I'm soory my english
  Reply With Quote
Old 01-08-2002, 01:10   #9 (permalink)
Freak Poster
 
Join Date: Mar 2001
Location: Slovakia
Posts: 233
Member: 3835
Status: Offline
Thanks Meter: 1
Post

[quote]Originally posted by Ombossman:<br /><strong>Hi to all.. Most of people asking about how to reapir GD-30 with<br /> message " WARNING unauthorized action detected"..<br /> to repair this phone follow steps below..

1.RUN program "GD50 repair&unlock by viknet v1.1 "

2.press "set test mode" and ON phone..phone goes test mode..<br />you will see IMEI and SERIAL..you can enter any ...for example

IMEI : 555555555555555<br />SERIAL:IIIIIIIIIIIIII

3. press "Repair and Unlock"<br />you will see again warning message..

repeat this steps Until you see [for me it was about 20 times]<br />IMEI: FFFFFFFFFFFFFF0<br />SERIAL:yyyyyyyyyyyy

that is very important..at this point you will<br />need to RUN program "NEO's GD30-50 Unlocker v7.3", next fill editbox<br />with "GD30" (if you are repairing GD30) or "GD50" (you know when)

<br />and press RESTORE. The progress bar should go to 100% and the phone<br />should "beep" two times. Phone working!

If you have GD30 and that solution is not working - flash it with USPU.<br />Solution is tested on few GD30 (first flashed with USPU) and one GD50 vA14.<br />OMBOSSMAN</strong><hr></blockquote>

When you click to button REPAIR and phone off and for moment you will see WARNING message, close program and power off phone and again repeat steps 1. - 3.<br />Remember - batery must be full. <br />You must repeat steps 1. - 3. when you see <br />IMEI: FFFFFFFFFFFFFF0<br />SERIAL:yyyyyyyyyyyy<br />or<br />IMEI: FFFFFFFFFFFFFF0<br />SERIAL:''''''''''''''

After that run program "NEO's GD30-50 Unlocker v7.3", next fill editbox<br />with "GD30" (if you are repairing GD30) or "GD50" (you know when) and click to buton restore. Phone must 2 times beep. After that your phone will be repair.

Last week I repair 2 phone GD30 with WARNING MESSAGE <img src="smile.gif" border="0">

brinki
  Reply With Quote
Old 01-09-2002, 16:32   #10 (permalink)
Insane Poster
 
Join Date: Sep 2001
Location: GSM
Posts: 60
Member: 6542
Status: Offline
Thanks Meter: 0
Post

Hi<br />Thanks guys...100% working

Farha
  Reply With Quote
Old 01-10-2002, 18:39   #11 (permalink)
No Life Poster
 
Siemens man's Avatar
 
Join Date: Apr 2001
Location: IN CASTLE
Age: 41
Posts: 5,798
Member: 3925
Status: Offline
Thanks Meter: 21
Post

hi all<br />Hello guys solution is working 1001% tested by me<br />thank you to write this solution.<br />best regards
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Pana GD90 and "Call rejected" warp Panasonic 9 01-17-2006 11:55
Dead Pana gd30, need help!!!! koras Panasonic 5 11-28-2004 21:30
**new PANA INFO and downloads. Tuts also GSM Solutions Ireland Panasonic 8 08-15-2004 16:37
UNLOCK VIA USB ADAPTOR PANAS X70 AND OTHER ONE> avals Panasonic 0 02-17-2004 02:30
PANA GD30 GD 50 ifrance Various 0 12-16-1999 22:35

 



All times are GMT +1. The time now is 06:30.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.35636 seconds with 8 queries

SEO by vBSEO