is there really a way to repair a dead GD90

[Meam]

after flashing a Gd90 with GAD9012b can't turn the Phone on, looked everywhere and tried almost every prog on the net but can not bring the phone to life, is there really any thing i can do, lots of people say that it is very easy, but no one gives you a working solution, does anyone know where i find some flash files for GD90, apart from GSM factory or GSMGODS

[nightxyz]

hi ,
which program did you use for flashing ?
And after flashing use gd90_7 prog like this.
GD90_7 1 -i IMEI
You must also correct charging problem.
And final thing :
Every GD90 doesn't use GAD90B12 , only has AT letters near the simcard holder accept this flash file.

Best Regards...

[Meam]

thanks for your reply,
i used Panasonic GD90 B16 solution downloaded from GSMGOD, flsashed it with gad90b12.DAT maybe that was the problem because the phone hat version gad90b 14-0000-13B before flashing and not b16, when i try to flash it now the green light goes on and the flashing process is done but i can not run GD90_7 after flashing because i am asked to turn the phone on and you get a massage like no response from phone or somthing like that, maybe i have used the wrong flash for this phone can any one send me some flash files for GD90 or tell me where i find them
thanks

[pilcris]

how to get the firmware version of panasonic gd90

[frenchi]

Hi Dear ,

I got the same problem...maybe your cable is home made...don't worry just use USPU cracked and flash again your phone/a lot of times if necessary/

Good Luck

[nightxyz]

Hi , again.
Don't use name "GAD90B12.dat"
only "GAD90B12" without extention.
1- First press "1" on the keyboard and then connect cable to the phone.Green light will turn on.Press ESC key to return the main menu.
2 - Press "4" on the keyboard.Then write gad90b12 or c:\xxxxxx\gad90b12
Not : xxxxxx is directory of where your gad90b12 file placed.This file is more than 1 MB long.After flashing , On the monitor , you must see the message "Flashing .... successfull , Press any key to return main menu"
3 - Press "8" key on the keyboard.

[Meam]

dear Nightxyz
after trying to flash the phone with gad90b12, i get this message
cannot recciev full Check-Sum indication press esc to return to menu
i think i cannot flash the phone properly, do you know what i have to do after getting this message, thanks for your help

[ByteMaster]

Be sure your cable work well. Try again nightxyz solution. Sometime if your machine is too slow this being a problem.
ICQ:97107817
Best Regards.
ByteMaster

[Meam]

hi
i tried nightxyz solution, the problem is that at the end of flashing i get the message:
can not receive ful Check-Sum indication
instead of getting the message:
flashing successfull
the cable i am using must be ok because i can unlock gd30 with it and the green ligt on the phone goes on when i start flashing, i don't realy know what the problem is

[ByteMaster]

hi;
i thing your soft installation not true. Because i make some errors like yours when i was unlocking GD90 phones first time and phone died but later i understand that this flash file and setting incorrect.Please control *.bat files and LZH.exe. Simple download (Panasonic GD90 B16 Solution (Tested 100%).zip)from www.gsmgods.net
and download B12 flash file too.Unzip this files in a same directory.Be sure that flash in .Lzh format.Because "go.bat" file otomaticly open this lzh file.And control if there in the directory any file with 0KB long.
i hope you understand something. if you don't understand i will mail you with pictures.
Sorry for bad english.
Best Regards.
ByteMaster.

[ByteMaster]

oooops........ i remember something now.Please check the directory location. Because the batch files is use "C:\flash90" or something like this. i say again check the "*.bat" files.

[Meam]

Thank you Bytemaster
at the moment i can not try any more thing because the battery is flat and i can not charge it, i will try to get another battery and try everything again.
fortunatelly Crew is helping me as well and has made some suggestion that i will try tomorow and see if we are going to bring the phone back to life.
just one question, the phone had originally the version GAD 90B 14-0000-13 B which flash file is the right flash for this phone? i have all the LZH files, which one is the right one?

[ByteMaster]

use GAD90B12.LZH. i always use it.

[Meam]

dear byte master
i have flashed the phone with GAD90B12.LZH lots of time but it doesn't work i still get the Message cannot receive Check-sum indication, i tried it with verify check- Sum the green light goes off but i am still unable to power on the phone, i fully charged the battery today as well so it can't be the Battery, i have almost given it up, because i have tried everything
i would like to thank everybody who tried to help

[Meam]

dear ByteMaster
is it possible for you or any other friend who has the File GAD90b12.lzh and has tested it with positive result to send me this file, maybe the one i am using is not working when i have a working GAd9012b may be i can give it a last try