"Unauthorised action detected" in gd30 - GSM-Forum

mobilemonster · 09-22-2000, 08:49

Please help me to repair "Unauthorised action detected" in gd30. I tried different repaier but nothing. Is it possible to repair it? Does exist really working sw ?
Help....

nightxyz · 09-22-2000, 23:15

Yes , it can be recover with some repairer and unlocker program...
100 % with my expierence.

Thomass · 09-23-2000, 02:46

After using Ptrs 1.1 U can flash it or repair by NEO........Don´t mail me.......

mobilemonster · 09-23-2000, 10:04

Thanks, i understood.
It can be repaired 100% but it will cost more than new gd30.
Can you help me for free?
I heard too that piotrs1.1 maybe can help me, but i can't find it anywhere, Neo sw as i see is for only gd50?
Who can help me and send theese sw?
Thanks, Best Regards.

Mediamag · 09-26-2000, 08:26

Thomas is BPhumus, I help you for free. Use Vicknet repair, change SW version to 15, flash it with winmodo, repair it with Zoran 1.3. All softs are for free. If you want, mail me.
Best wishes

Thomass · 09-28-2000, 00:02

Hi MEDIAMAG, I see you need more LSD.I will send it to you ..........for free....
To another friends of this forum I sent solution for free too.......

mobilemonster · 09-28-2000, 11:58

Hi.
Please Help me.
My gd30 is still not working.("unauth..")
I tried all repairer, i think it is near death.

Thomass · 09-30-2000, 00:59

For all:
1/Piotrs 1.1....wait till the phone finishes blink./is dead/
2/Now you can use flasher or repairer/after flashing still dead/
3/Use your favorite repairer/Zoran,Neo/......but for me Zoran is temporarly solution,Neo 100% solution
4/Change IMEI to original by Piotrs....
5/Tested by me on more than 20 phones up to 21 week......A13....A14...

mobilemonster · 09-30-2000, 10:08

Thanks, Tomass
But the phone don't finish the blinking.
But it is not dead. I repaired it already.
By trick with vicnet v1.0.
Solution is really working and don't need flashing

Gsm Trade · 10-19-2000, 19:48

Hello!!!
Here is solution for your problem:.RUN program "GD50 repair&unlock by viknet v1.0 "
(program attached..)
2.press "set test mode" and ON phone..phone goes test mode..
you will see IMEI and SERIAL..you can enter any ...
for example
IMEI : 555555555555555
SERIAL:IIIIIIIIIIIIII
3. press "Repair and Unlock"
you will see again warning message..

repeat this steps Until you see

IMEI: FFFFFFFFFFFFFF0
SERIAL:yyyyyyyyyyyy

that is very important..
at this point you will enter

IMEI : 449121882548521
SERIAL : 125005687236501 ( not magic numbers just fit)

and press "Repair and Unlock"
phoen lights will up..and nothing on the screen..
press keys..and lights still ON..
keep about 2-3 minutes of this position..
(keep pressing keypad,linghts ON and nothing on the screen..)
4. after 2-3 minutes OFF the phone and ON again..THAT'S ALL..

Enjoy

------------------
Best Regards
Greetings from Slovenia
[email protected]

mobilemonster · 10-20-2000, 11:30

Thanks a lot for your help, but i have this solution it's really 100% working, and i repared my panasonic 3 weeks ago. And This solution works for another problems too, like "nothing on the screen when turn on", but this problem can appear on another cases too and cannot be fixed 100%, for example, if hardware problem exists.

Bojan · 10-20-2000, 19:54

I was got on my phone (GD30 24/00):
IMEI: FFFFFFFFFFFFFF0
SERIAL:yyyyyyyyyyyy0 (I got zero on the end)

and after entering:
IMEI : 449121882548521
SERIAL : 125005687236501

phone is dead!? No light or anything. I was use viknet 1.1 if is that problem?
Please, send me viknet 1.0 or some working solution.

Gsm Trade · 10-21-2000, 19:45

Yes ithappend sometimes. You musttry again. Sometimes the phone is dead,but allways goes in testmode ,keep trying and you will unlock your phone. I was kill my panasonic,it was dead,but i was trying again and again and now work fine and it's upgraded on GD50.

Don't loose your fate!!!!

------------------
Best Regards
Greetings from Slovenia
[email protected]

qido · 10-21-2000, 22:37

HI all !

By me, its no neccessary to use another program, only viknet repair 1.1 . In this program its neccessary to increasing time out if U have fast PC. Standart timeout (24) works on p 200 MHz. I have repaired 26 phones. Viknet repair automaticaly upgrade your GD 30 to GD 50...

Vinknet is a very good work man !!!

QIDO

------------------
Slovak GSM group

rLz · 02-18-2001, 02:52

Hi!

I have "unauthorised action detected" in gd50. The solution with viknet repair 1.0 or 1.1 not work for me...

help me pls

rLz

09-22-2000, 08:49	#1 (permalink)
mobilemonster Crazy Poster Join Date: Feb 2000 Location: qwer,qqwe,Russia Posts: 56 Member: 1010 Status: Offline Thanks Meter: 0	"Unauthorised action detected" in gd30 Please help me to repair "Unauthorised action detected" in gd30. I tried different repaier but nothing. Is it possible to repair it? Does exist really working sw ? Help....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GD30 unauthorised action detected	.::AkhavanGSM::.	Panasonic	8	01-10-2003 15:43
Unauthorised action detected" in gd30 A14	igor_g	Panasonic	1	10-19-2000 19:45

09-22-2000, 23:15	#2 (permalink)
nightxyz Freak Poster Join Date: Jun 2000 Posts: 354 Member: 1623 Status: Offline Thanks Meter: 1	Yes , it can be recover with some repairer and unlocker program... 100 % with my expierence.

09-23-2000, 02:46	#3 (permalink)
Thomass Freak Poster Join Date: Jun 2000 Location: Czech republic Age: 55 Posts: 261 Member: 1596 Status: Offline Thanks Meter: 12	After using Ptrs 1.1 U can flash it or repair by NEO........Don´t mail me.......

09-23-2000, 10:04	#4 (permalink)
mobilemonster Crazy Poster Join Date: Feb 2000 Location: qwer,qqwe,Russia Posts: 56 Member: 1010 Status: Offline Thanks Meter: 0	Thanks, i understood. It can be repaired 100% but it will cost more than new gd30. Can you help me for free? I heard too that piotrs1.1 maybe can help me, but i can't find it anywhere, Neo sw as i see is for only gd50? Who can help me and send theese sw? Thanks, Best Regards.

09-26-2000, 08:26	#5 (permalink)
Mediamag Freak Poster Join Date: Sep 2000 Posts: 95 Member: 2014 Status: Offline Thanks Meter: 0	Thomas is BPhumus, I help you for free. Use Vicknet repair, change SW version to 15, flash it with winmodo, repair it with Zoran 1.3. All softs are for free. If you want, mail me. Best wishes

09-28-2000, 00:02	#6 (permalink)
Thomass Freak Poster Join Date: Jun 2000 Location: Czech republic Age: 55 Posts: 261 Member: 1596 Status: Offline Thanks Meter: 12	Hi MEDIAMAG, I see you need more LSD.I will send it to you ..........for free.... To another friends of this forum I sent solution for free too.......

09-28-2000, 11:58	#7 (permalink)
mobilemonster Crazy Poster Join Date: Feb 2000 Location: qwer,qqwe,Russia Posts: 56 Member: 1010 Status: Offline Thanks Meter: 0	Hi. Please Help me. My gd30 is still not working.("unauth..") I tried all repairer, i think it is near death.

09-30-2000, 00:59	#8 (permalink)
Thomass Freak Poster Join Date: Jun 2000 Location: Czech republic Age: 55 Posts: 261 Member: 1596 Status: Offline Thanks Meter: 12	For all: 1/Piotrs 1.1....wait till the phone finishes blink./is dead/ 2/Now you can use flasher or repairer/after flashing still dead/ 3/Use your favorite repairer/Zoran,Neo/......but for me Zoran is temporarly solution,Neo 100% solution 4/Change IMEI to original by Piotrs.... 5/Tested by me on more than 20 phones up to 21 week......A13....A14...

09-30-2000, 10:08	#9 (permalink)
mobilemonster Crazy Poster Join Date: Feb 2000 Location: qwer,qqwe,Russia Posts: 56 Member: 1010 Status: Offline Thanks Meter: 0	Thanks, Tomass But the phone don't finish the blinking. But it is not dead. I repaired it already. By trick with vicnet v1.0. Solution is really working and don't need flashing

10-19-2000, 19:48	#10 (permalink)
Gsm Trade Major Poster Join Date: Oct 2000 Location: Slovenia Posts: 40 Member: 2326 Status: Offline Thanks Meter: 0	Hello!!! Here is solution for your problem:.RUN program "GD50 repair&unlock by viknet v1.0 " (program attached..) 2.press "set test mode" and ON phone..phone goes test mode.. you will see IMEI and SERIAL..you can enter any ... for example IMEI : 555555555555555 SERIAL:IIIIIIIIIIIIII 3. press "Repair and Unlock" you will see again warning message.. repeat this steps Until you see IMEI: FFFFFFFFFFFFFF0 SERIAL:yyyyyyyyyyyy that is very important.. at this point you will enter IMEI : 449121882548521 SERIAL : 125005687236501 ( not magic numbers just fit) and press "Repair and Unlock" phoen lights will up..and nothing on the screen.. press keys..and lights still ON.. keep about 2-3 minutes of this position.. (keep pressing keypad,linghts ON and nothing on the screen..) 4. after 2-3 minutes OFF the phone and ON again..THAT'S ALL.. Enjoy ------------------ Best Regards Greetings from Slovenia [email protected]

10-20-2000, 11:30	#11 (permalink)
mobilemonster Crazy Poster Join Date: Feb 2000 Location: qwer,qqwe,Russia Posts: 56 Member: 1010 Status: Offline Thanks Meter: 0	Thanks a lot for your help, but i have this solution it's really 100% working, and i repared my panasonic 3 weeks ago. And This solution works for another problems too, like "nothing on the screen when turn on", but this problem can appear on another cases too and cannot be fixed 100%, for example, if hardware problem exists.

10-20-2000, 19:54	#12 (permalink)
Bojan Junior Member Join Date: Oct 2000 Location: Yugoslavia Posts: 4 Member: 2347 Status: Offline Thanks Meter: 0	I was got on my phone (GD30 24/00): IMEI: FFFFFFFFFFFFFF0 SERIAL:yyyyyyyyyyyy0 (I got zero on the end) and after entering: IMEI : 449121882548521 SERIAL : 125005687236501 phone is dead!? No light or anything. I was use viknet 1.1 if is that problem? Please, send me viknet 1.0 or some working solution.

10-21-2000, 19:45	#13 (permalink)
Gsm Trade Major Poster Join Date: Oct 2000 Location: Slovenia Posts: 40 Member: 2326 Status: Offline Thanks Meter: 0	Yes ithappend sometimes. You musttry again. Sometimes the phone is dead,but allways goes in testmode ,keep trying and you will unlock your phone. I was kill my panasonic,it was dead,but i was trying again and again and now work fine and it's upgraded on GD50. Don't loose your fate!!!! ------------------ Best Regards Greetings from Slovenia [email protected]

10-21-2000, 22:37	#14 (permalink)
qido Freak Poster Join Date: Oct 2000 Location: Kosice, Slovakia Posts: 167 Member: 2369 Status: Offline Thanks Meter: 0	HI all ! By me, its no neccessary to use another program, only viknet repair 1.1 . In this program its neccessary to increasing time out if U have fast PC. Standart timeout (24) works on p 200 MHz. I have repaired 26 phones. Viknet repair automaticaly upgrade your GD 30 to GD 50... Vinknet is a very good work man !!! QIDO ------------------ Slovak GSM group

02-18-2001, 02:52	#15 (permalink)
rLz Junior Member Join Date: Dec 2000 Posts: 2 Member: 2930 Status: Offline Thanks Meter: 0	Hi! I have "unauthorised action detected" in gd50. The solution with viknet repair 1.0 or 1.1 not work for me... help me pls rLz