unauthorized action detected in gd30 . - GSM-Forum

makona · 11-27-2000, 04:00

Hi all ,
plz send me thr solution to it .
i got this info by thomas from old post : For all:
1/Piotrs 1.1....wait till the phone finishes blink./is dead/
2/Now you can use flasher or repairer/after flashing still dead/
3/Use your favorite repairer/Zoran,Neo/......but for me Zoran is temporarly solution,Neo 100% solution
4/Change IMEI to original by Piotrs....
5/Tested by me on more than 20 phones up to 21 week......A13....A14...

OK , but i didn't find piotrs program .. plz if anybody have it .. send me it or site to download from .
[email protected]

another solutin i got via viknet 1.1 repairer and its not safe 100% ..
i tried too many times changing serial and IMEI and somtimes phone dead and somtimes back to live with low contrast ,
i decided to leave it and use piotrs Thomass Solution ..
plz help me ,
[email protected]
Best Regards
M E S H O Z

makona · 11-27-2000, 04:59

Hey ..
i think i destroyed it more than the first time with msg " unauthorized ... "
i tried som solutions and phone now is :
powering on just for 4 secound or 3 and OFF itself without anything in the screen and when using viknet " enter testmode " just .
zoran read it untill it off itself .
viknet read imei : FFFFFFFFFFFF0
serial : ?????????????????
what to do after ?
sombody said in this case i have to enter this imei : and this serial : ...
but after entering them ..
phone is off and out of testmode ..
i need to flash it how ?
got winmodo plus1.1 dunno who to use it ?
waiting for help
fast plzzzzzz
regards
M E S H O Z

Meam · 11-28-2000, 07:29

Hi Mes...
i have had a few dead Gd30 up to now, i always use viknet till it was dead and then used neos GD30/50 unlocker & restorer 7.3
when your Phone is dead just use neo put the type phone in and Com 1 or com 2 and then click on Restore you will be asked to turn the phone on and after a few seconds the phone makes a noise and ist alive and unlocked
best regards
Meam

BELY · 11-30-2000, 01:43

hi meshoz
what your mail I have all what you want ...

qido · 11-30-2000, 02:04

Hi!

All what U want is Viknet 1.1 If U have a pentium 200 there is no problem , if your PC is faster U must modify delay... Try it many times and U will be succesfull...

regards

QIDO

------------------
Slovak GSM group

makona · 11-30-2000, 06:24

i tried viknet 100000 times ..
about faster pc .. its strange ..
why i increase timout when phone goto testmode easy !!
anyway i'll re-try and tell u all again .
thnx
my email : [email protected]
p.S :
i got winmodo 2.4 and didnt detect phone
i got neo repairer and restore .. stop in half before the end of line when pressing restore in it .

Thanks all

bone · 12-02-2000, 21:09

hi meshoz!
this was issued some times ago here by
[email protected] !!100x for him!!
cuz it worked for me for both 50 and 30

** original begins **

Here is solution for your problem:.RUN program "GD50 repair&unlock by viknet v1.0 "
(program attached..)
2.press "set test mode" and ON phone..phone goes test mode..
you will see IMEI and SERIAL..you can enter any ...
for example
IMEI : 555555555555555
SERIAL: IIIIIIIIIIIIII
3. press "Repair and Unlock"
you will see again warning message..
repeat this steps Until you see

IMEI: FFFFFFFFFFFFFF0
SERIAL:yyyyyyyyyyyy

that is very important..
at this point you will enter

IMEI : 449121882548521
SERIAL : 125005687236501 ( not magic numbers just fit)

and press "Repair and Unlock"
phoen lights will up..and nothing on the screen..
press keys..and lights still ON..
keep about 2-3 minutes of this position..
(keep pressing keypad,linghts ON and nothing on the screen..)
4. after 2-3 minutes OFF the phone and ON again..THAT'S ALL..

Enjoy

*** original end ***

if u want more details mail me private

********************
and it also would be very much appreciated who could help me out from the following situation:

gd30 99-43
no unlockers worked
i tried viknet but now when i turn on
screen flashes one and nothing on screen
it goes into test mode but its
NOT unauthorized!!!
only nothing on screen

please who have sollution mailme private or just post here the sollution!

100x in advance!
bone
mailto:[email protected]

Stryker · 12-03-2000, 08:11

to meshoz!
yes the solution by gsmtrade works 100%!!! i tried it many times! you could also upgrade gd30 to 50 using this solution.

to bone!
i think you could repair it using Neo 7.3.

regards:0
Stryker

bone · 12-03-2000, 16:00

hi Stryker
neo's 7.3 dont worx this time...
indicator stops at around 70%
when i turn this gd30 on, it flashes once a bit and then nothing, but neo's and viknet
also puts it into test mode...
i really dont know how to solve this..
maybe lcd contast (but in test mode: testset test mode is viewable)
ive got winmodo 1.6, 2.4, plus, and
gad3xa09.abs
gad3xa10.abs
gad3xa14.abs

but i never used winmodo (and as i see these
versions are only for download?)

please if someone has sollution, method...
ive got a very urgent need for that!

(((

10x in advance
bone
mailto:[email protected]

Quote:

Originally posted by Stryker:
to bone!
i think you could repair it using Neo 7.3.

regards:0
Stryker

xtc · 12-03-2000, 21:47

Hi all!

Where can i downloaded the WINMODO 2.4?
(with a10 or etc...)
I can't find it anywhere...
Please send me an Url...
Thxxx
xtc

bone · 12-03-2000, 22:26

hi xtc
on egroups-gsmhacking download area
there is winmodo 2.4 as i saw
http://www.egroups.com/files/gsmhack...winmodo_24.zip

note: i think u must be registered to that group to down
it takes only 5mins i think
and after u may cancell registration

bye
bone

Quote:

Originally posted by xtc:
Hi all!

Where can i downloaded the WINMODO 2.4?

xtc

te · 12-04-2000, 09:10

GD 30 summary:
In different SW versions of GD30 there is a different protection.
-----
For unlock A09, A10 there is a two ways:
1. Clear flash with CF command, perform ordinary unlock and write old data back.
2. Open access to SPL data with password, perform ordinary unlock.
You can't get "unauthorised" using this two methods.
-----
In the A14 there is the second protection level (need second pasword). I can't find this password now

CF command not works.
I am sure - it is possible to downgrade it to A09 or A10 but... I cant do this - winmodo can't communicate with my GD30. I can't understand why...

If you have any ideas about this - let me know. And I guarantee - you'll get repair software in some hours.

bone · 12-06-2000, 23:58

hi!
i still have the problem..
i cannot believe that noone have experienced
similar

i really need help

neo is not working in this case
viknet is not working in this case
winmodo cannot find mobile
but chbox can... but i cannot do any
useful with it

so im really stuck with the problem
1000x for prson who can give me a hand!

bone

Quote:

Originally posted by bone:
neo's 7.3 dont worx this time...
indicator stops at around 70%
when i turn this gd30 on, it flashes once a bit and then nothing, but neo's and viknet
also puts it into test mode...
i really dont know how to solve this..
maybe lcd contast (but in test mode: testset test mode is viewable)

nightxyz · 12-07-2000, 06:15

Hi to all...

Go http://www.geocities.com/mgxyz for GD30 Warning solution.
If it doesn't work assume phone as a GD50 and try again and again.You will success.

Best Regards...

bone · 12-09-2000, 16:34

to nightxyz!
100x!!
u had the sollution!
if there's anything i may
help just ask, ..anytime

i hope a can repay

best wishes,
bone
mailto:[email protected]

Quote:

Originally posted by nightxyz:

You will success.

11-27-2000, 04:00	#1 (permalink)
makona No Life Poster Join Date: Nov 2000 Location: EGYPT Age: 44 Posts: 1,202 Member: 2583 Status: Offline Sonork: 100.88702 Thanks Meter: 203	unauthorized action detected in gd30 . Hi all , plz send me thr solution to it . i got this info by thomas from old post : For all: 1/Piotrs 1.1....wait till the phone finishes blink./is dead/ 2/Now you can use flasher or repairer/after flashing still dead/ 3/Use your favorite repairer/Zoran,Neo/......but for me Zoran is temporarly solution,Neo 100% solution 4/Change IMEI to original by Piotrs.... 5/Tested by me on more than 20 phones up to 21 week......A13....A14... OK , but i didn't find piotrs program .. plz if anybody have it .. send me it or site to download from . [email protected] another solutin i got via viknet 1.1 repairer and its not safe 100% .. i tried too many times changing serial and IMEI and somtimes phone dead and somtimes back to live with low contrast , i decided to leave it and use piotrs Thomass Solution .. plz help me , [email protected] Best Regards M E S H O Z

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
unauthorized sim detected in tsm4	ASHIF	Multi-Box	8	04-25-2006 07:47
GD30 unauthorised action detected	.::AkhavanGSM::.	Panasonic	8	01-10-2003 15:43
"Unauthorised action detected" in gd30	mobilemonster	Panasonic	16	06-15-2001 23:23
Unauthorised action detected" in gd30 A14	igor_g	Panasonic	1	10-19-2000 19:45
GD30 , Warning Unauthorized action detected!	nightxyz	Panasonic	1	08-14-2000 08:52

11-27-2000, 04:59	#2 (permalink)
makona No Life Poster Join Date: Nov 2000 Location: EGYPT Age: 44 Posts: 1,202 Member: 2583 Status: Offline Sonork: 100.88702 Thanks Meter: 203	Hey .. i think i destroyed it more than the first time with msg " unauthorized ... " i tried som solutions and phone now is : powering on just for 4 secound or 3 and OFF itself without anything in the screen and when using viknet " enter testmode " just . zoran read it untill it off itself . viknet read imei : FFFFFFFFFFFF0 serial : ????????????????? what to do after ? sombody said in this case i have to enter this imei : and this serial : ... but after entering them .. phone is off and out of testmode .. i need to flash it how ? got winmodo plus1.1 dunno who to use it ? waiting for help fast plzzzzzz regards M E S H O Z

11-28-2000, 07:29	#3 (permalink)
Meam No Life Poster Join Date: Nov 2000 Age: 47 Posts: 836 Member: 2553 Status: Offline Thanks Meter: 3	Hi Mes... i have had a few dead Gd30 up to now, i always use viknet till it was dead and then used neos GD30/50 unlocker & restorer 7.3 when your Phone is dead just use neo put the type phone in and Com 1 or com 2 and then click on Restore you will be asked to turn the phone on and after a few seconds the phone makes a noise and ist alive and unlocked best regards Meam

11-30-2000, 01:43	#4 (permalink)
BELY Freak Poster Join Date: Nov 2000 Location: ------ Posts: 131 Member: 2485 Status: Offline Thanks Meter: 1	hi meshoz what your mail I have all what you want ...

11-30-2000, 02:04	#5 (permalink)
qido Freak Poster Join Date: Oct 2000 Location: Kosice, Slovakia Posts: 167 Member: 2369 Status: Offline Thanks Meter: 0	Hi! All what U want is Viknet 1.1 If U have a pentium 200 there is no problem , if your PC is faster U must modify delay... Try it many times and U will be succesfull... regards QIDO ------------------ Slovak GSM group

11-30-2000, 06:24	#6 (permalink)
makona No Life Poster Join Date: Nov 2000 Location: EGYPT Age: 44 Posts: 1,202 Member: 2583 Status: Offline Sonork: 100.88702 Thanks Meter: 203	i tried viknet 100000 times .. about faster pc .. its strange .. why i increase timout when phone goto testmode easy !! anyway i'll re-try and tell u all again . thnx my email : [email protected] p.S : i got winmodo 2.4 and didnt detect phone i got neo repairer and restore .. stop in half before the end of line when pressing restore in it . Thanks all

12-02-2000, 21:09	#7 (permalink)
bone Freak Poster Join Date: Oct 2000 Location: . Posts: 180 Member: 2415 Status: Offline Thanks Meter: 0	hi meshoz! this was issued some times ago here by [email protected] !!100x for him!! cuz it worked for me for both 50 and 30 original begins Here is solution for your problem:.RUN program "GD50 repair&unlock by viknet v1.0 " (program attached..) 2.press "set test mode" and ON phone..phone goes test mode.. you will see IMEI and SERIAL..you can enter any ... for example IMEI : 555555555555555 SERIAL: IIIIIIIIIIIIII 3. press "Repair and Unlock" you will see again warning message.. repeat this steps Until you see IMEI: FFFFFFFFFFFFFF0 SERIAL:yyyyyyyyyyyy that is very important.. at this point you will enter IMEI : 449121882548521 SERIAL : 125005687236501 ( not magic numbers just fit) and press "Repair and Unlock" phoen lights will up..and nothing on the screen.. press keys..and lights still ON.. keep about 2-3 minutes of this position.. (keep pressing keypad,linghts ON and nothing on the screen..) 4. after 2-3 minutes OFF the phone and ON again..THAT'S ALL.. Enjoy * original end * if u want more details mail me private ******************** and it also would be very much appreciated who could help me out from the following situation: gd30 99-43 no unlockers worked i tried viknet but now when i turn on screen flashes one and nothing on screen it goes into test mode but its NOT unauthorized!!! only nothing on screen please who have sollution mailme private or just post here the sollution! 100x in advance! bone mailto:[email protected]

12-03-2000, 08:11	#8 (permalink)
Stryker Freak Poster Join Date: Jun 2000 Location: In front of pc Posts: 308 Member: 1585 Status: Offline Thanks Meter: 15	to meshoz! yes the solution by gsmtrade works 100%!!! i tried it many times! you could also upgrade gd30 to 50 using this solution. to bone! i think you could repair it using Neo 7.3. regards:0 Stryker

12-03-2000, 21:47	#10 (permalink)
xtc Junior Member Join Date: Jul 2000 Posts: 35 Member: 1710 Status: Offline Thanks Meter: 0	Hi all! Where can i downloaded the WINMODO 2.4? (with a10 or etc...) I can't find it anywhere... Please send me an Url... Thxxx xtc

12-04-2000, 09:10	#12 (permalink)
te No Life Poster Join Date: Oct 2000 Location: Nearest pub Posts: 676 Member: 2357 Status: Offline Thanks Meter: 4	GD 30 summary: In different SW versions of GD30 there is a different protection. ----- For unlock A09, A10 there is a two ways: 1. Clear flash with CF command, perform ordinary unlock and write old data back. 2. Open access to SPL data with password, perform ordinary unlock. You can't get "unauthorised" using this two methods. ----- In the A14 there is the second protection level (need second pasword). I can't find this password now CF command not works. I am sure - it is possible to downgrade it to A09 or A10 but... I cant do this - winmodo can't communicate with my GD30. I can't understand why... If you have any ideas about this - let me know. And I guarantee - you'll get repair software in some hours.

12-07-2000, 06:15	#14 (permalink)
nightxyz Freak Poster Join Date: Jun 2000 Posts: 354 Member: 1623 Status: Offline Thanks Meter: 1	Hi to all... Go http://www.geocities.com/mgxyz for GD30 Warning solution. If it doesn't work assume phone as a GD50 and try again and again.You will success. Best Regards...