code to find version on gu87??? - GSM-Forum

blitzkrieg22 · 05-30-2003, 07:13

People pls help. How to find out which version is on your phone. I entered *#9999 while we switch on and the phone is searching but its of no use. So wat exactly to enter and when to find the version.

Secondly i have a GU87..trying to unlock,used winmodo to downgrade to A22 but not too sure if its alreadydone. Didnt use CB2000 thou, Tried with panareaderv5.0 to get the log and all it says is conection time out after the power is switched on for the panareader!!
Pls help am in deep trouble.

benlam · 05-30-2003, 12:59

u missed....# mate

it should be *#9999#

benlam · 05-30-2003, 13:03

checked with your cable.....
it's not the program problem..

if the cable work...even A39 or version they do not support..
they will just keep in test mode and hang up..

your case is your cable doesn't support..

benlam · 05-30-2003, 13:05

some GD92 cable reported this probem.....

check with your supplier...

and buy a cable indicating GD87 next time...though they are very similar ....but sadly to say some GD92 cable work on GD87 ..and some don't .......I was told u might need power stabiliser in such cable......

but I don't know why some GD92 cable can work without that

blitzkrieg22 · 05-30-2003, 14:47

hi,
I used the GD87 cable..am sure. And i used the 9v power stablizier too. So pls help. I didn use the cb2000. Do i need to use it.
Best Regards

benlam · 05-30-2003, 16:15

for me...I didn't use power stabiliser/...

just the GD87 cable should be okay...

even I did tackle a problem with A39 orange..

the reader still work....but just what I said...in test mode and then hang up...

that made me think your cable doesn't quite right...

05-30-2003, 07:13	#1 (permalink)
blitzkrieg22 Junior Member Join Date: May 2003 Posts: 7 Member: 28341 Status: Offline Thanks Meter: 0	code to find version on gu87??? People pls help. How to find out which version is on your phone. I entered *#9999 while we switch on and the phone is searching but its of no use. So wat exactly to enter and when to find the version. Secondly i have a GU87..trying to unlock,used winmodo to downgrade to A22 but not too sure if its alreadydone. Didnt use CB2000 thou, Tried with panareaderv5.0 to get the log and all it says is conection time out after the power is switched on for the panareader!! Pls help am in deep trouble.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need a code to find the product code	waleedy	Nokia Base Band 5 ( BB-5 )	0	09-03-2007 22:42
i want to know the code to find out type of mobile	rana khawar	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	01-19-2006 05:43
how do you find version on NEC?	21amo	NEC	1	02-22-2005 12:32
codes to see version.... on z105	SuPeR_PoPeY	QUALCOMM Models (3G)	0	08-29-2004 02:01
plz how to use mw bootstrap tool to find id on sagem phones	essojay	Infineon C16X M51 & ARM7 M52 BASED	1	12-07-2002 15:24

05-30-2003, 12:59	#2 (permalink)
benlam Junior Member Join Date: Dec 2002 Location: HKSAR Age: 56 Posts: 39 Member: 18976 Status: Offline Thanks Meter: 0	u missed....# mate it should be *#9999#

05-30-2003, 13:03	#3 (permalink)
benlam Junior Member Join Date: Dec 2002 Location: HKSAR Age: 56 Posts: 39 Member: 18976 Status: Offline Thanks Meter: 0	checked with your cable..... it's not the program problem.. if the cable work...even A39 or version they do not support.. they will just keep in test mode and hang up.. your case is your cable doesn't support..

05-30-2003, 13:05	#4 (permalink)
benlam Junior Member Join Date: Dec 2002 Location: HKSAR Age: 56 Posts: 39 Member: 18976 Status: Offline Thanks Meter: 0	some GD92 cable reported this probem..... check with your supplier... and buy a cable indicating GD87 next time...though they are very similar ....but sadly to say some GD92 cable work on GD87 ..and some don't .......I was told u might need power stabiliser in such cable...... but I don't know why some GD92 cable can work without that

05-30-2003, 14:47	#5 (permalink)
blitzkrieg22 Junior Member Join Date: May 2003 Posts: 7 Member: 28341 Status: Offline Thanks Meter: 0	hi, I used the GD87 cable..am sure. And i used the 9v power stablizier too. So pls help. I didn use the cb2000. Do i need to use it. Best Regards

05-30-2003, 16:15	#6 (permalink)
benlam Junior Member Join Date: Dec 2002 Location: HKSAR Age: 56 Posts: 39 Member: 18976 Status: Offline Thanks Meter: 0	for me...I didn't use power stabiliser/... just the GD87 cable should be okay... even I did tackle a problem with A39 orange.. the reader still work....but just what I said...in test mode and then hang up... that made me think your cable doesn't quite right...