Unlock Flash Gu87 Gd87 Gd88 Step By Step

[readoybdmobile]

it might seem a bit hard to do, but once you finish the first step ( flash the phone ) the rest is easy
PS: DO NOT INTERRUPT THE FLASH UNTIL IT'S A %100 DONE

before unlocking your phone you need to downgrade the software version by flashing it with A22
1. A Panasonic GU87 Handset FULLY CHARGED
2. A Serial (not usb) Data Cable.
3. WinMoDo Software :http://unlockeasy.com/modules.php?n...=titleA&show=10
4. Flash Files :http://unlockeasy.com/modules.php?n...download&cid=53
5. CB2000 :http://unlockeasy.com/modules.php?n...wdownload&cid=8
6. CRACK2D (panasonicgd 6x and gd8x) http://unlockeasy.com/modules.php?n...=titleA&show=10
7. driver for the phone (Data Connection Assistant Version 4.0) http://www.panasonic.com/consumer_e...t_downloads.asp


after you download the listed above, install the driver for the phone then
run WinMoDo

Lets get started;

1. Select Com port.


2. Select phone model ( In this case choose "GD87" )


3. Select baud rate, choose "115200"


4. Make sure the 2 boxes (MAIN AND BOOT) are green by pressing them. ( when the boxs are green this defines that the part of the phone will be flashed, when red it will not be flashed)

.
5. Connect phone to the cable ( Phone must be off )


7. Now choose image file ( The image file is the main filmware of the phone, this does not contain language packs).


8. When the above is completed simply press the " Start download button".


9. When the progress report window shows "signalling" press the power button on the phone for a second (do not power on the phone)


10. Now just wait approximately 15 minutes, within in 15 minutes you will see various reports in the progress report window, as below.

As the phone is being flashed you will see the vertical progress bar moving towards 100% , as below

11. If every thing went according to plan the last progress report window will display " Download completed successfully"

12. now places 2 pieces of Scotch tape of the size of a copper contact on pines 4 and 10 of the GD87. Check that the insulator does not overflow on another pine
13. start CB2000.

Click on Handset Power and lights the GD87 immediately.

Go in Data and Write Setting Function Clear (Memory Erase).

close the interface, disconnect the cable.

replug the GD87, and start Spunlock (Crack2).

In the mitre configuration, select the good port COM, that which you connected on the PC.

Click on Read GD87/88 codes.

Eeprom is freed automatically, but the manipulation will be done since the mobile:

Light the GD87 without sim, slaps 746 then the central key 2 times

Enter the Net codes with 16 digits.

readoybdmobile

[prasse]

Wow... detail info, but 3-4 years old...

[cyberbob]

please help unlocking my gd87...I have rs232 cable only...

[damabib]

is really tough .take a year of process

[DeDo Gsm1911]

it's very new post if you post it from 4 years ago
lol

[GSM Solutions Ireland]

The above info is taken from a site i did about 3 -4 years ago.


readoybdmobile -> please be kind enough to give credit were its due! and not claim as your own!


The orignal with full guide and images can be found here
http://www.freewebs.com/flashpanasonic/


Br
Alan Donohoe
Gsm Solutions Ltd
www.GsmSolutionsLtd.com

[Afzaal]

Originally Posted by Gsm Solutions Ltd

The above info is taken from a site i did about 3 -4 years ago.


readoybdmobile -> please be kind enough to give credit were its due! and not claim as your own!


The orignal with full guide and images can be found here
http://www.freewebs.com/flashpanasonic/


Br
Alan Donohoe
Gsm Solutions Ltd
www.GsmSolutionsLtd.com

Just this Solution work for me.
i did not need CB2000
after Flashing Boot and Image code was Successfully Readed by Spunlock 2
thanks all m8s
BR

[GSM MIND]

hmmmmmmmm if u check it before posting then it was good idea to post it but i think its good idea also cos alot people having problem to unlock this phone and worry how to flash phone if phone stop flashing in mid or etc... dont worry flash again but dont now put out the battary.....


REGARDS

GSM MIND

[PIMP123]

hi all,
I know its off topic,
Pls can any1 post solution for GD67 ?
I need the flash files infact to downgrade

[Afzaal]

[quote=GSM MIND]hmmmmmmmm if u check it before posting then it was good idea to post it

Can u Xplain what do u mean by this????????????

[GSM MIND]

[quote=Afzaal]

Originally Posted by GSM MIND

hmmmmmmmm if u check it before posting then it was good idea to post it

Can u Xplain what do u mean by this????????????

YES SIR i mean brother befor posting u must search it cos this solution is old too old 3 years or might be 4 years and posted by many times with many other fourm users with different subject if u mind then sorry now u happy

REGARDS

GSM MIND

[Afzaal]

What Do u mean by Search b4 Posting
i Searched before Unlocking GD87 So i access this thread.
and why should i Search more when 1st thread's 1st Solution workout for me.
why i care if its old or New Solution and i was not in this field 3 or 4 yrs back.
I Just Know that this is working Solution and what is your Opinion about old Working Solutions if any Solution get older shud we throw those Working Solution in the BIN and Should Search for New Solutions.
i did not Mind at all But its really Shocking for me.
that you are telling me that i should Search b4 Posting.
Whats the Point of Searching Something New about JUST UNLOCKING GD87.
will i be able to active 3G in GD87 if i Search the latest method of UNLOCKING GD87.
I Don't think SO.
anyways My Dear Brother think b4 Posting.
Regards and thx to all m8s.



YES SIR i mean brother befor posting u must search it cos this solution is old too old 3 years or might be 4 years and posted by many times with many other fourm users with different subject if u mind then sorry now u happy

REGARDS

GSM MIND[/quote]

[~mr_Ten$ion~]

The link is not working any tested flashfiles link have any1
BR

[~mr_Ten$ion~]

Thanx i will unlock My 1st GD87 ... tht gr8... thanx
Br

[WalkAndTalkGSM]

is there any way to change language on front end m8?