20-01-2008 New Nokia Tool v.4.0F - IMEI patch for DCT4+ new security - RELEASED!

[GSMtricks]

Originally Posted by lion4000

i have probleme with nokia tool (multibox) i need tool for ufs interface
*******************************
Phone not found
1. Check whether phone is in LOCAL MODE/Powered on
2. Check whether MultiBox is in Nokia mode
3. Check whether cable is plugged into Special socket
4. Check whether cable is ok
5. Check the USB Cable length (should not exceed 0,5 meters!)
6. Check whether MultiBox is plugged into Mainboard directly (not any hubs, or front of PC Case)
7. Check and clean if needed phone socket pads
8. If you are trying to connect to NMP Symbian based phone, wait until phone boot-up
**********************
i can't attach the phone ( it's probleme multibox ??!!.)
please help me

This is Multi-box support section and here support only for Multi-box, no need to ask about UFS

[Miftahudin]

Originally Posted by GSMtricks

20-01-2008
New update again!

New New Nokia tool v.4.0F released -Change IMEI in new Security phones: Nokia 1200, Nokia 1208, Nokia 1650. We support all MCU versions. Phone is working and there is no network issues as some peoples claimed already. Please go to Support files and download new software Tools, flash files.

On 08 Jan added support for "new flash chip" support new mcu versions:
2310 v6.52 (new flash chip)
1112 7.02 (new flash chip)
1110i 7.02 (new flash chip)
1116 7.02 (new flash chip)
2626 6.80 (new flash chip)
On 17 Jan All 1200,1208,1650 partials was revised and resized to 192kb only, fixed network "issues".

And finally on 20 Jan we added our new service to Change IMEI in new Security phones: 1200; 1208; 1650. We support all MCU versions. Phone is working and there is no network issues as some peoples claimed already. Just check screenshots below.

1200 1208 1650 IMEI Change Procedure step by step, in example of Nokia 1650
1. Connect phone to Typhoon Software, click Attach, and then click "IMEI REQ" button. Enter new 14 digit IMEI.



2. ASK file will be created, send it to our mail - [email protected] for creating partial file suitable exactly ONLY to your phone.





3. After some time, you wil receive "imei_img" file.



4. Flash this file with any Nokia flasher.
5. Attach to phone again using our SW.



6. Click "Locks" to initialize SP values due to IMEI change.



Voila, phone is unlocked, have signal, and "corrected" IMEI, here is results:




How to update?
Update your installation using Typhoon Updater OR
download EXE directly from http://www.karwossuite.pl/Updater_Root/Nokia_Tools.exe

PS. To algerian unlockers. Sorry but 1112 6.46 issues will be fixed ASAP when i will get my phone sample. HW 6.46 is impossible to get here in Europe.
PS2. This service is of course free of charge.
PS3. Check your country laws first.
PS4. Dont ask for 2630,2760,2660,2600 Classic unlock/imei (it will not be avaiable for public FOR NOW).

Can we repair Damage IMEI with This update
I mean IMEI ????????????????????????????
Best regards,

[GSMtricks]

Originally Posted by Miftahudin

Can we repair Damage IMEI with This update
I mean IMEI ????????????????????????????
Best regards,

Please read this post from a beggining. There amswer already there.

[bartholomeo]

After Unlock 1650 No Signale I Need A Good Pm Or Restor I Dont Find Him Any Where Thinks For Your Help

[rasgula]

Good Work Mate Great Update..............................jaf Is Bussy In Bb5.

[kevin168]

how repair black screen after unlocking?????

i have 1650 black screen after unlocking, i have read many thread bout this unlock, but nothing give an answer...

br,
kevin168

[kevin168]

sorry my faults...
reaflashed again cnt+ppm after unlocking process, and all goin good...

thanks

br,
kevin168

[GSMtricks]

Yes sure is working it has been tested a lot fo times before mr.Karwos release it.

[kaisak]

Yes it was already clarify said by us MANY MANY times that if unlock image is > 1mb then you need to flash it together with CNT and PPM... its not any bug or problem, just user fault.

[kevin168]

sorry hehehehehe..............

i'm new using multi box here....

still need some experience.,,,

br,
kevin168

[simba1805]

please upload here patch unlock img for 1110i ver 6.46, i can't acces server with my multi-box to download it

[karwos]

6.46 thanks for Malcom for sample ) Parital is under testing and will be uploaded in 1-2 days

[crowys]

Originally Posted by karwos

Download old version (4.0.e)
and then just update main EXE file downloading this
always fresh executable from
http://www.karwossuite.pl/Updater_Root/Nokia_Tools.exe

And the n-box you support your software?

[Multi-box TEAM]

It is Multi-box Products section! Post your question in the appropriate section!

[crowys]

When I buy the multibox, and brings me active karwossuite multiplatform software ?????

I find myself or buy any Activation