23-08-2006 Again New Big Updates!!!
 

23-08-2006
New updates again!

We are happy to present you new updates. First one is for Alcatel VLE5 series (Alcatel E259 ), now our software supports all new Alcatel E259 with new firmwares.

Second one is for Nokia! More and more power in each update for best Nokia testing tool. 1st in the world! 6230/6230i ASIC6 Phones Warranty IMEI Restore Solution!

Please go to Support files and download new software.

What is new in Nokia Tool v.3.0j:
=====
- Nokia 6230/6230i Warranty Problems Fixed - first in the world "000000000000000" Warranty IMEI solution! Thanks to mtmc!
Nokia 6230/6230i on latest firmwares version have bug, i.e. in 6230 after upgrade from 3.x to 5.x you loose Warranty Imei, so you also loosing Warranty. KarwosSuite can easily Recovery the Warranty Data to its original state, so guys from NMP can not recognize that phone lacks of warranty! It is additional security introduced into ASIC6 phones.
- Added Lifetimer Reset function, Fast and safe
- Added KarwosSuite Samsung 3G Inside Software into Installer
- Minor changes/bugfixes

New software screenshots:

http://www.multi-box.net/img/vle5_new.gif

very Good Updates Multi-box More power !!!



www.mobilewala.com

I have't used this software yet,It seems to be a nice software.
Can this software unlock sim blocked alcatel e259.I have this model in large quantity, which are asking for reset key when I insert sim in it.and if I enter the codes it says invalid key. I managed to unlock few pieces by other softwares and codes, but still I don't know the correct way, how I have done it:(. If multi box can do it, that would be very nice.then I'll buy it:)
If anybody had this problum and solved successfully please post here

1. Run the software Alcatel Exxx Tool. And check please your box activation status. Your box must have Alcatel activations like in a picture. If you dont have "- ALST" activation - you need to update the activations - press "box update" button and it will be activated in 2 sec ( internet connection must be on ). It is extra payd activatipons ( ~120$ - ask you reseller about it ).
http://www.multi-box.net/img/exxx_un_1.jpg
2. Connect the cable to socket called "UNI". With Exxx cable ( schematics is already in a support area ). Check please you com port settings. And select correct com port. In my case Multi-box Port was 6 - and for work with alcatel com port 7 ( it is very important to select a correct com port - in other case you will get error: enable to open com port ).
http://www.multi-box.net/img/exxx_un_2.jpg

3. Connect telefon ( in my case it was Alcatel E256 ) to cable ( socket is near battery ). Phone must be switchet off.
4. Press "connect" botton is a software. Software will ask you about press on botton on the phone. You must press power on botton shotly ( ~1 sec ) on the phone. After that you will see next info.
http://www.multi-box.net/img/exxx_un_3.jpg
5. Press "read codes" botton. After that press "disconect" botton. Disconnect your phone from cable. Insert sim card and power on the phone. Then phone will ask you about NCK - just write the code and press OK. Your phone will be unlocked!
http://www.multi-box.net/img/exxx_un_4.jpg

Maybe you have usr code? Did you try to enter reset code?

very nice update :)

keep it up freind ;)

br

<= The_Gorr =>

@GSMtricks
Thank you for your quick reply. I already got reset code by using other softwares and if I enter that code, phone is saying 'invalid key'.So I don't think reset code can solve my problum. and I tried all available methods in those softwares, but failed.
Any way I'll try your software also:)

Tell me first which code yout phone asks from you?

@GSMtricks

Sorry for late reply,
When I switch on my ot e259, it's display was showing "sim blocked, call operator" then it shown " enter reset code"
Any way I have solved that problum by writing a new e259 back up file in it . after then it normally asked for NCK code, after I enter the currect code phone has unlocked and working well:)
Thank again for your support and advice

BR

Super. Also you can try new software version it will help you next time ;-)

Where is "testpoint boot" ?

At support area for sure. Check before ask next time.

I have checked before ask but all I have found is alcatel_Exxx.jpg with pinouts.

Strange it is 3 month old update everybody have pinout and just you cannot find...
product support/multi-box/base software/software/ALC_Tool/Cable_schematics/alcatel_Exxx.jpg

This schematic there already 4 month.

I' m not talking about pinout but about testpoint cause there is "testpopint boot" option on software.

My universal cable is working with code reader software but doesn' t with multibox or other. I have checked pinouts with same result.

That' s the reason why I thought there were a testpoint possibility because I saw it on software. Nothing more.

Then I really don't understand you. About which test points you are tolking?