Sendo 620 Dead afetr Flash - GSM-Forum

dannyogolo · 02-14-2006, 18:14

This phone came to me with some kind of nasty fault.
When powered, it will be making some kind of noise, like when its sendo TEST.
I decided to flash it with regular cable, but after successful flashing, phone is DEAD.
I flashed with second flash, and also phone remains dead.

Meanwhile phone still boots with software.
I just decided to flash with JTAG, and after successfully flashing both flash files again thru JTAG, phone still dead.

What else can I do ???

Forgot to say that all these while, I equally flash CP and Eeprom.

Waiting,

Thanks

GSMtricks · 02-15-2006, 08:56

We wrote about sendo 620 too may times.
here is complete steps to sendo620 flashing with jtag
Read this topic ( also be sure that you have latest box firmware version )

dannyogolo · 02-16-2006, 09:05

Quote:

Originally Posted by GSMtricks

We wrote about sendo 620 too may times.
here is complete steps to sendo620 flashing with jtag
Read this topic ( also be sure that you have latest box firmware version )

This is exactly what I have done.
I used the cable that comes with Multibox, and cut 4 wires (If I didnt do this, I wouldnt have been able to flash the phone with Jtag as I said.

I dunno what is wrong with this phone, ahhhh

02-14-2006, 18:14	#1 (permalink)
dannyogolo No Life Poster Join Date: Nov 2002 Posts: 2,690 Member: 18200 Status: Offline Sonork: 100.1608286 Thanks: 44 Thanked 75 Times in 54 Posts	Sendo 620 Dead afetr Flash This phone came to me with some kind of nasty fault. When powered, it will be making some kind of noise, like when its sendo TEST. I decided to flash it with regular cable, but after successful flashing, phone is DEAD. I flashed with second flash, and also phone remains dead. Meanwhile phone still boots with software. I just decided to flash with JTAG, and after successfully flashing both flash files again thru JTAG, phone still dead. What else can I do ??? Forgot to say that all these while, I equally flash CP and Eeprom. Waiting, Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
sendo 620 after flash ( mcu lp cp/ep) i have a bleu lcd	yane	Multi-Box	3	04-25-2006 12:28
!!sendo 620 after connect dead!!	rajabrotherscom	Multi-Box	4	04-06-2006 13:52
To the ones with DEAD sendo 620	geosan1638	Multi-Box	9	01-28-2006 11:31
sendo n620 dead after flash	rachelyna	Multi-Box	1	11-25-2005 14:41
heeellllppppp sendo 620 dead	hall	DELOK DONGLE	6	05-31-2005 11:55

02-15-2006, 08:56	#2 (permalink)
GSMtricks No Life Poster Join Date: Mar 2001 Age: 33 Posts: 11,022 Member: 3610 Status: Offline Sonork: 100.54638 Thanks: 168 Thanked 1,648 Times in 568 Posts	We wrote about sendo 620 too may times. here is complete steps to sendo620 flashing with jtag Read this topic ( also be sure that you have latest box firmware version )