SF65 No Signal and Camera Problems after flash - GSM-Forum

unlocker2000 · 02-08-2006, 03:13

Hi, i flashed 2 units of sf65 with the Wester Europe Flash and unlock, all 100 % ok, but the phone not have signal and when i use the camera all are black, turn again the screen and phone powers off itself, same errors on 2 units, what can i do???

GSMtricks · 02-08-2006, 14:56

Quote:

Originally Posted by unlocker2000

Hi, i flashed 2 units of sf65 with the Wester Europe Flash and unlock, all 100 % ok, but the phone not have signal and when i use the camera all are black, turn again the screen and phone powers off itself, same errors on 2 units, what can i do???

1. Flash MCU, LP, CP, Eeprom
2. Flex ( flax all sections )
3. Make all defaults settings.

elizag · 02-08-2006, 17:49

same probelms for me

unlocker2000 · 02-08-2006, 17:51

ok, flash all parts again, including eeprom, flex all sections, make defaults

The phone now only shows siemens logo without back light and power off, i read something about new flex for new hardware, but not are in support site, can this new flex recover my 3 phones???

Waiting for ignition...OK
Flash ID:002088C4:002088C5 - ST M36LLR775 Size:32Mb

Updating MCU Firmware...

CLA info: 14-01022340-08
Writing Flash...OK

Updating Languages Pack...

Writing Flash...OK

Updating Content Pack...

Writing Flash...OK

Updating EEPROM...

Writing Flash...OK
Waiting for ignition...OK
Detecting phone version...
Model: SiemensSF65
FW Date: SF65
HW: 11/08/2004
FW Version: 0x0234000209030000
IMEI: 353891-00-584803
Setting IMEI data...OK
SIM Lock init...OK
Personalization data init...OK
Writing SAV data...OK
WAP/MMS/GPRS/JAVA data init...OK
E-Mail data init...OK
Ready...
Waiting for ignition...Timeout!
Waiting for ignition...OK
Detecting phone version...
Model: SiemensSF65
FW Date: SF65
HW: 11/08/2004
FW Version: 0x0234000209030000
IMEI: 353891-00-584803
Dwn info: 14-01022340-08
SAV ID: 000000000000
SIM Lock status:
NCK : ******** - ERROR! - DB:8A
NSCK: 81597322267599 - ERROR! - 47:BD
SPCK: ******** - ERROR! - FF:C0
CCK : 09****** - ERROR! - D0:CB
PCK : ******** - ERROR! - DA:1F
Phone Lang.Pack: 0008 : WestEurope
Ready...
Setting IMEI data...OK
SIM Lock init...OK
Waiting for ignition...OK
Detecting phone version...
Model: SiemensSF65
FW Date: SF65
HW: 11/08/2004
FW Version: 0x0234000209030000
IMEI: 353891-00-584803
Dwn info: 14-01022340-08
SAV ID: 000000000000
SIM Lock status:
NCK : ******** - OPEN - FF:FF
NSCK: ******** - OPEN - FF:FF
SPCK: ******** - OPEN - FF:FF
CCK : ******** - OPEN - FF:FF
PCK : ******** - OPEN - FF:FF
Phone Lang.Pack: 0008 : WestEurope
Ready...
Setting Lang.Setup data...OK
Reading Lang.Setup data...???
Read SecInfo timeout!Error!
Ready...
Flexing phone...OK

GSMtricks · 02-08-2006, 17:52

Quote:

Originally Posted by elizag

same probelms for me

Try to reflash with other version

GSMtricks · 02-08-2006, 18:05

Also be sure that you have a latest software version ( v.4.1. ) with latest signature file. Box Firmware must be 1.0.10

unlocker2000 · 02-09-2006, 15:02

Last version of software and formware solves all th eporblems, thanks so much... now, i have 2 units more that not boot in TAT mode, i make teh testpoints cables, but can make boot in boot strap, i follow all the schematics, full baterry, any special recomendations???

GSMtricks · 02-09-2006, 15:21

If you sure that you have made correct cable - I think it is a hardware problem. ( dont forget that for bootstrap mode you sould use other socket in Multi-box called "Uni" )

alexander_bg · 05-14-2006, 00:48

@unlocker2000
hello
2 days i break by mind with too same problem...
i resolove this problem when i conect phone on TAT mode used UNI port not special. after conect phone just press defaut. if you do it on boot mode phone will show only siemens logo without back light and power off.

p.s. now have other problem - camera not work and back light is verry poor...

alexander_bg · 05-14-2006, 01:13

hello again

camera work fine. only problem is poor back light. i m not sure it is software or hardware problem because phone come to me dead...
will make some test and will post results

regards
sasho

GSMtricks · 05-14-2006, 13:47

Quote:

Originally Posted by alexander_bg

hello again

camera work fine. only problem is poor back light. i m not sure it is software or hardware problem because phone come to me dead...
will make some test and will post results

regards
sasho

Reflash your phone with MCU, LP, CP + eeprom.

P.S don't post next time same posts in all topics.

02-08-2006, 03:13	#1 (permalink)
unlocker2000 No Life Poster Join Date: Mar 2004 Posts: 636 Member: 56387 Status: Offline Thanks Meter: 10	SF65 No Signal and Camera Problems after flash Hi, i flashed 2 units of sf65 with the Wester Europe Flash and unlock, all 100 % ok, but the phone not have signal and when i use the camera all are black, turn again the screen and phone powers off itself, same errors on 2 units, what can i do???

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
U600 camera and memory problem after flashing	pitiless	NSPRO	1	07-07-2007 18:16
camera problem after flashing x640	japunlock	SYSOL Platform	1	11-16-2005 12:03
camera problem after flash 8330	aziddj	Cruiser Suite	0	08-16-2005 16:54
V500 camera problem after flashing," Photo Wiewfinder,memory used 0%"	Irinel	Motorola P2k	7	08-30-2004 15:19

02-08-2006, 17:49	#3 (permalink)
elizag Insane Poster Join Date: Jun 2003 Posts: 93 Member: 30463 Status: Offline Thanks Meter: 0	same probelms for me

02-08-2006, 17:51	#4 (permalink)
unlocker2000 No Life Poster Join Date: Mar 2004 Posts: 636 Member: 56387 Status: Offline Thanks Meter: 10	ok, flash all parts again, including eeprom, flex all sections, make defaults The phone now only shows siemens logo without back light and power off, i read something about new flex for new hardware, but not are in support site, can this new flex recover my 3 phones??? Waiting for ignition...OK Flash ID:002088C4:002088C5 - ST M36LLR775 Size:32Mb Updating MCU Firmware... CLA info: 14-01022340-08 Writing Flash...OK Updating Languages Pack... Writing Flash...OK Updating Content Pack... Writing Flash...OK Updating EEPROM... Writing Flash...OK Waiting for ignition...OK Detecting phone version... Model: SiemensSF65 FW Date: SF65 HW: 11/08/2004 FW Version: 0x0234000209030000 IMEI: 353891-00-584803 Setting IMEI data...OK SIM Lock init...OK Personalization data init...OK Writing SAV data...OK WAP/MMS/GPRS/JAVA data init...OK E-Mail data init...OK Ready... Waiting for ignition...Timeout! Waiting for ignition...OK Detecting phone version... Model: SiemensSF65 FW Date: SF65 HW: 11/08/2004 FW Version: 0x0234000209030000 IMEI: 353891-00-584803 Dwn info: 14-01022340-08 SAV ID: 000000000000 SIM Lock status: NCK : ****** - ERROR! - DB:8A NSCK: 81597322267599 - ERROR! - 47:BD SPCK: **** - ERROR! - FF:C0 CCK : 09** - ERROR! - D0:CB PCK : **** - ERROR! - DA:1F Phone Lang.Pack: 0008 : WestEurope Ready... Setting IMEI data...OK SIM Lock init...OK Waiting for ignition...OK Detecting phone version... Model: SiemensSF65 FW Date: SF65 HW: 11/08/2004 FW Version: 0x0234000209030000 IMEI: 353891-00-584803 Dwn info: 14-01022340-08 SAV ID: 000000000000 SIM Lock status: NCK : **** - OPEN - FF:FF NSCK: **** - OPEN - FF:FF SPCK: **** - OPEN - FF:FF CCK : **** - OPEN - FF:FF PCK : ****** - OPEN - FF:FF Phone Lang.Pack: 0008 : WestEurope Ready... Setting Lang.Setup data...OK Reading Lang.Setup data...??? Read SecInfo timeout!Error! Ready... Flexing phone...OK

02-08-2006, 18:05	#6 (permalink)
GSMtricks No Life Poster Join Date: Mar 2001 Age: 44 Posts: 11,016 Member: 3610 Status: Offline Sonork: 100.54638 Thanks Meter: 1,652	Also be sure that you have a latest software version ( v.4.1. ) with latest signature file. Box Firmware must be 1.0.10

02-09-2006, 15:02	#7 (permalink)
unlocker2000 No Life Poster Join Date: Mar 2004 Posts: 636 Member: 56387 Status: Offline Thanks Meter: 10	Last version of software and formware solves all th eporblems, thanks so much... now, i have 2 units more that not boot in TAT mode, i make teh testpoints cables, but can make boot in boot strap, i follow all the schematics, full baterry, any special recomendations???

02-09-2006, 15:21	#8 (permalink)
GSMtricks No Life Poster Join Date: Mar 2001 Age: 44 Posts: 11,016 Member: 3610 Status: Offline Sonork: 100.54638 Thanks Meter: 1,652	If you sure that you have made correct cable - I think it is a hardware problem. ( dont forget that for bootstrap mode you sould use other socket in Multi-box called "Uni" )

05-14-2006, 00:48	#9 (permalink)
alexander_bg Freak Poster Join Date: Mar 2002 Location: BULGARIA Age: 48 Posts: 312 Member: 10423 Status: Offline Thanks Meter: 15	@unlocker2000 hello 2 days i break by mind with too same problem... i resolove this problem when i conect phone on TAT mode used UNI port not special. after conect phone just press defaut. if you do it on boot mode phone will show only siemens logo without back light and power off. p.s. now have other problem - camera not work and back light is verry poor...

05-14-2006, 01:13	#10 (permalink)
alexander_bg Freak Poster Join Date: Mar 2002 Location: BULGARIA Age: 48 Posts: 312 Member: 10423 Status: Offline Thanks Meter: 15	hello again camera work fine. only problem is poor back light. i m not sure it is software or hardware problem because phone come to me dead... will make some test and will post results regards sasho