To all the people who ask why Infinity Box does not make cables for chinese mobiles

[odayking]

hi infinity team

i bought 13*1 chines cables for infinity but i chack with infinity slim box not work ...

pls what doing


thnks for any reply

[bootgsm]

infinity box is universal box so you need to have pinouts of cables same as infinity .i meen 1:Vpp / 2:Tx / 3:Rx / 4:Rts / 5:Cts / 6:M bus / 7&8:gnd
so you need to take a multimeter and test if your tx go to pin number 2 .Rx go to pin number 3 and GND go to pins 7&8 and take a look here http://pinouts.ru/CellularPhones-A-N...s_pinout.shtml this wil help you

[Infinity-Box]

To all the people who ask why Infinity Box does not make cables for chinese mobiles

Chinese phones are made by hundreds of manufacturers

example Chinese N73 , This model is not made by 1 manufacturer in china , it is made by more than 20 - 30 manufacturers, and because of different manufacturers , they have different CPU design and different pinout for cable.
So you see 1 model has so many different pinouts and new pinout keep coming when another manufacturer makes the same phone . so it is practicaly impossible to make cables for chinese phones and keep customer satisfied.

Yes the cable set will work for 2 - 3 models but it will be useless for so many other models and waist of money . Then customers will have complaint , they will say they bought Chinese N73 but phone never connect with software , our cable is bad . etc etc

Best Solution for now is to make your own cable and make good money . because not many people service these chinese phones the lucky Infinity Box customers got free updates for it . we help in real time . we make update to chinese phones every week , recently 30 new models were added.

The fastes way Infinity Box customers can get support for unknown pinout for chinese phone is by doing the following

In most cases you need to know Gnd, Rx, Tx pins for flash/unlock operations. What do do if you don't have cable or you have new phone model:

1. find Gnd pin (it's required step, you can't continue until you will know Gnd pin location)
2. find Charge pins (it's optional step, just to save your time during future research)
3. find +Battery pins (it's optional step, just to save your time during future research)
4. connect cable Gnd to phone Gnd
5. try to connect cable Rx/Tx wires to all phone contacts one by one (except Gnd, Charge, +Battery pins) and try to read flash from phone
6. if flash read procedure can start this means that pinout found Ok and you can make other operations

Note about "Chinese models": a lot of different phones with the same name exist on market (as well as many different name phones with the same pinouts), so, if you see in our "cable selector" wrong pinout for "Chinese models"it's good idea to find correct pinout acording to above instruction and send found pinout information with full text from phone back label to InfinityHelp@yahoo.com.hk


We keep addiing new models to Chiense Miracle because we have very positive feedback from thousands of Infinity Box customers reporting their success story with chinese phones

In the end i would like to say : Making cable sounds difficult but once u make your first cable , then the rest will be very easy

I found a post on this forum where people have posted working pinouts for various chinese models , you can find at this link
All Chinese Miracle Mobiles 10000% Tested Pinouts here

[Minos GSM]

very thanks for this explanation infinity team

[.:==di@bila==:.]

Very nice thread, I have many customeer that have this restart problem when you put SIMCARD and Hope it should be flashed but where pinout can be found?
This is a very important thread mate and lets give comfirmation after Test.

Once again Tnx to Infity Team, we (Infintiy Box User) own you a beer.

[zinoubinabil]

@all
this thread it is just for the persons which ask why infinity box does'nt make cables for chinese mobiles
so thread should be closed.



thx for your comprihention

br
infinity-box team