Calibration is No Working After Complete Format FFS..

[LoveLess]

hi all and supporters...


after complete format ffs, calibration is not working..i tried safe mode but phone not connected to software..and i dont have backup and it is new fw..

COM40 [VCP3] selected
module  v3.25
Device: Autodetect 6228-6253 NAND
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (460800)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: MAUI.09A.W09.32.MP.V3_1056
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: M35_0932_BOOTLOADER_V005_MT6235B_MAUI_09A_W09_32_MP_V3_1056.bin
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: M35_0932_PCB01_GPRS_MT6235B_S01.MAUI_09A_W09_32_MP_V3_1056.BIN
project-id: MAUI.09A.W09.32.MP.V3_1056, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: [standard] type (07)
TCL-ID is absent
===>  done
====================
New firmware found (v.3.25, database date: 24.10.2010): 
M35_0932_PCB01_GPRS_MT6235B_S01.MAUI_09A_W09_32_MP_V3_1056.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 32Mb
number of areas/bytes to read: 1:02000000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...

[InfinityHelp]

hello!

why not to make calibration manually, by tapping test points by PEN?!?

[christba]

read full flash and use to calibrate with chinese miracle (infinity dongle)

[LoveLess]

Originally Posted by InfinityHelp

hello!

why not to make calibration manually, by tapping test points by PEN?!?

yes sir i did.. not calibrated.. always pressed it nothing changed..then i read firmware then i used autocalibrate mode then i choosed backup.. then again complete format ffs... then manually tried to calibrate it and at this time it worked.. maybe the first time i didnt do it correctly so it didnt work..

thanx alot.. phone touch is working now...