Cant detect pinouts For Forme F8 - GSM-Forum

nageshh · 05-20-2010, 09:02

Please help me Yellow boss,
pinfinder is not finding pinouts for Forme F8 handset.
It is MT 6220 type cpu &
it uses L8a pin connector.
please its urgent,
or if having its rx tx pinouts,pls post here.

InfinityHelp · 05-21-2010, 08:49

hello!

before searching pinout you must do 3 easy steps:

1. Make sure that this is mt62xx MCU based phone.
tip: you can check this by typing *#0044# and pressing green (send) button.
if you will see "language set: english"- you can be sure, that this phone is MT62xx.
Now activate Silent mode in phone by pressing and holding "#".

2. Count number of pins in system connector. After this is done-
pick correspondent cable. For example if you counted 2x6 pins- it is in total 12
so no point to put L14D cable instead of correct one, L12B.

3. Select cable type, connect power crocodiles in the place of battery.
push "Power On!" in software. Now phone is powered with pinfinder power.
Try to switch it On. This is main rule for success pinout search.
(Phone must turn ON)

if it does not turn On- no point to search for pinouts. you will not find it.
Start from modifying your main infinity box to deliver more power to pinfinder.
There is one diode which must be removed and shortcutted.
Open Pinfinder User Manual on Trubleshooting section and see in pictures how this must be done.

after you get phone powered- you are ready to find phone pinout.
press and Hold phone power button and start search.

05-20-2010, 09:02	#1 (permalink)
nageshh No Life Poster Join Date: Nov 2008 Location: India,Maharashtra Posts: 586 Member: 890991 Status: Offline Thanks Meter: 146	Cant detect pinouts For Forme F8 Please help me Yellow boss, pinfinder is not finding pinouts for Forme F8 handset. It is MT 6220 type cpu & it uses L8a pin connector. please its urgent, or if having its rx tx pinouts,pls post here.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-27-2015 11:57
needed pinout for carkit(N61xx)	mobileinfo	Nokia Hardware & Hardware Repair	2	07-23-2013 02:41
Operator-Logo for 5110	MiMiR the WiseMan	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	06-25-1999 15:50

05-21-2010, 08:49	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! before searching pinout you must do 3 easy steps: 1. Make sure that this is mt62xx MCU based phone. tip: you can check this by typing *#0044# and pressing green (send) button. if you will see "language set: english"- you can be sure, that this phone is MT62xx. Now activate Silent mode in phone by pressing and holding "#". 2. Count number of pins in system connector. After this is done- pick correspondent cable. For example if you counted 2x6 pins- it is in total 12 so no point to put L14D cable instead of correct one, L12B. 3. Select cable type, connect power crocodiles in the place of battery. push "Power On!" in software. Now phone is powered with pinfinder power. Try to switch it On. This is main rule for success pinout search. (Phone must turn ON) if it does not turn On- no point to search for pinouts. you will not find it. Start from modifying your main infinity box to deliver more power to pinfinder. There is one diode which must be removed and shortcutted. Open Pinfinder User Manual on Trubleshooting section and see in pictures how this must be done. after you get phone powered- you are ready to find phone pinout. press and Hold phone power button and start search.