china 5800 show error formiting - GSM-Forum

zeedan · 11-07-2010, 13:56

here is logs show error i have rx tx cable joint show this error plz help me what's problem....................................COM4 [VCP2] selected
module v3.24
Device: Autodetect 6205-6239 NOR
Checking data, wait...
advanced flash detection enabled
Action: reset settings ("format ffs")
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [346C:0001]...
CPU: MT346C
high speed boot On
error: hardware is not supported: [0000346C:00000001]
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 12 sec
Remove/Install battery now !
...

InfinityHelp · 11-07-2010, 22:30

hello!

please use latest China Miracle software ver.3.25 and select "6253 NOR" CPU type

m_tahir1 · 11-08-2010, 08:34

china 5800 restarting on ringing
after format same what i do?
COM3 [VCP0] selected
module v3.25
Device: Autodetect 6228-6253 NAND
Checking data, wait...
Action: reset settings ("format ffs") NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6253:8A02:8A00
status: FF
bbchip bl ver: FE
NOR flash id[00C1]: 00EC:240400000000 [SAMSUNG] K5N2833ATB
chip size: 16Mb
otp status/size: S_DA_NOR_OTP_NOT_SUPPORT/00000000
NAND flash chip: not installed
internal RAM size: 00020000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (115200)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 00000000/00000000
detect sec ro...
detect custom parameters...
detect project-id...
project-id: X5_NHX_H01_AQ12_FM_S12
detect NOR info...
number of areas/bytes to read: 1:00040000
reading (HW_STORAGE_NOR)...
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version:

NEOTEL53_09A_PCB01_GPRS_MT6253_S00.X5_NHX_H01_AQ12 _FM_S12.BIN
project-id: X5_NHX_H01_AQ12_FM_S12, 00000000
code offset: 00000000
ffs offset/size [02]: 00E00000/00200000
rom info structure: [standard] type (07)
TCL-ID is absent
===> done
====================
New firmware found (v.3.25, database date: 20.10.2010):
NEOTEL53_09A_PCB01_GPRS_MT6253_S00.X5_NHX_H01_AQ12 _FM_S12.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this

firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to

RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 16Mb
number of areas/bytes to read: 1:01000000
reading (HW_STORAGE_NOR)...
Finished, time used: 05.12
Remove/Install battery now !

m_tahir1 · 11-08-2010, 08:48

new firmware download here china 5800 mt 6253
http://www.4shared.com/file/9fdRUuyf...RS_MT6253.html

InfinityHelp · 11-08-2010, 21:53

hello!

try to call 112 with removed SIM card.
does it also restarts?

11-07-2010, 13:56	#1 (permalink)
zeedan No Life Poster Join Date: Apr 2009 Posts: 1,434 Member: 1015645 Status: Offline Thanks Meter: 114	china 5800 show error formiting here is logs show error i have rx tx cable joint show this error plz help me what's problem....................................COM4 [VCP2] selected module v3.24 Device: Autodetect 6205-6239 NOR Checking data, wait... advanced flash detection enabled Action: reset settings ("format ffs") ffs/eeprom backup enabled, it may takes several minutes ! ====> Boot ... Press and HOLD Power button now ! 19200 fixed Connecting, wait... Initializing [346C:0001]... CPU: MT346C high speed boot On error: hardware is not supported: [0000346C:00000001] Release Power button now ! in case of initial connection problem: on/off "Boot baudrate autoselect" Boot Fail Finished, time used: 12 sec Remove/Install battery now ! ...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
where to find a working program all they have some errors ??	fondas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	12-12-2012 13:26
My 5110 v5.11 have a strange error.., it resets it self every 60second	luuk	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	24	08-11-2006 15:29
Avoid 3 times error code in Nokia 6185	X-plot	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-08-2000 20:24
The multiple errors of Winlock ... ???	Genata	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	09-20-1999 19:12
error (1002) simlock3.dll winopen	fondas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	08-28-1999 15:57

11-07-2010, 22:30	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! please use latest China Miracle software ver.3.25 and select "6253 NOR" CPU type

11-08-2010, 08:34	#3 (permalink)
m_tahir1 Temporary banned !! Join Date: Apr 2007 Posts: 779 Member: 482214 Status: Offline Sonork: 100.1617896 Thanks Meter: 316	china 5800 restarting on ringing after format same what i do? COM3 [VCP0] selected module v3.25 Device: Autodetect 6228-6253 NAND Checking data, wait... Action: reset settings ("format ffs") NAND interface: BROM_DLL_v3.1016.00 Connect... Phone should be Switched OFF ! Press and HOLD Power button now ! Connecting... Booting... Release Power button now ! bootcode current/expected: 3.2/3.2 CPU: 6253:8A02:8A00 status: FF bbchip bl ver: FE NOR flash id[00C1]: 00EC:240400000000 [SAMSUNG] K5N2833ATB chip size: 16Mb otp status/size: S_DA_NOR_OTP_NOT_SUPPORT/00000000 NAND flash chip: not installed internal RAM size: 00020000 external RAM: S_DA_RAM_ERROR done Set baudrate (115200)... done ram test... testing... ram test passed ===> detect existing firmware structure... detect ffs... ffs offset/size: 00000000/00000000 detect sec ro... detect custom parameters... detect project-id... project-id: X5_NHX_H01_AQ12_FM_S12 detect NOR info... number of areas/bytes to read: 1:00040000 reading (HW_STORAGE_NOR)... TCL-ID detection... TCL-ID detection done startup code area #1 detection... startup code area #1 detection done rom info ver: 07 sw version: NEOTEL53_09A_PCB01_GPRS_MT6253_S00.X5_NHX_H01_AQ12 _FM_S12.BIN project-id: X5_NHX_H01_AQ12_FM_S12, 00000000 code offset: 00000000 ffs offset/size [02]: 00E00000/00200000 rom info structure: [standard] type (07) TCL-ID is absent ===> done ==================== New firmware found (v.3.25, database date: 20.10.2010): NEOTEL53_09A_PCB01_GPRS_MT6253_S00.X5_NHX_H01_AQ12 _FM_S12.BIN This firmware is missing in support area. If this phone is good and working: - download latest software from support area and try again, probably this firmware already supported in latest software - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage - include in your e-mail full text from phone back label (phone name etc.) ==================== area size: 16Mb number of areas/bytes to read: 1:01000000 reading (HW_STORAGE_NOR)... Finished, time used: 05.12 Remove/Install battery now !

11-08-2010, 08:48	#4 (permalink)
m_tahir1 Temporary banned !! Join Date: Apr 2007 Posts: 779 Member: 482214 Status: Offline Sonork: 100.1617896 Thanks Meter: 316	new firmware download here china 5800 mt 6253 http://www.4shared.com/file/9fdRUuyf...RS_MT6253.html

11-08-2010, 21:53	#5 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! try to call 112 with removed SIM card. does it also restarts?