Chinese Miracle-2 MTK/MediaTek v1.05 - Nokia 108/130/220/225 support - GSM-Forum

YellowBoss · 10-23-2014, 20:58

Chinese Miracle-2 (Release) MTK/MediaTek v1.05 released

Nokia 108/130/220/225 support

MediaTek SP Platform
Other:
FlashInit improved
Compile Info extraction improved
FlashID database updated

MediaTek FP Platform
New CPU/Models supported:
Nokia MT625A: Nokia 108 (RM-944, RM-945), Nokia 220 (RM-969, RM-970, RM-971)
Nokia MT6260: Nokia 130 (RM-1035, RM-1036, RM-1037), Nokia 225 (RM-1011, RM-1012, RM-1043)
Supported Features:
Check/Read Info
Format FS (Safe Format/Reset Settings)

Other:
Required to use special drivers for Nokia MTKx phones (uploaded on support)
Flash Read/Write is useless due security protection

saber1985 · 10-25-2014, 18:23

Please add simlock unlock option for the mentioned Nokia phone models which have MTK based chips

YellowBoss · 10-25-2014, 20:32

Quote:

Originally Posted by saber1985

Please add simlock unlock option for the mentioned Nokia phone models which have MTK based chips

Hello,

I think you cn unlock these models with help of our Server: BB5 Easy Service Tool [BEST] - Functions

ngocdiemmobile · 11-02-2014, 08:41

add spd flash read write or fomat now . please

ngocdiemmobile · 11-02-2014, 09:11

Card found: S/N
Chinese Miracle II [MTK module] v 1.05

Operation : Read Flash [ v1.05 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 64 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0068 , [ST] ST512R4A
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Break by user

Done!
Elapsed: 00:00:11
Reconnect Power/Cable!

Operation : Read Flash [ v1.05 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 64 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0068 , [ST] ST512R4A
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...
NAND settings not exists, will check now ...
Settings read Ok!
- > Re-connect battery and start operation again!

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!

Operation : Read Flash [ v1.05 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 64 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0068 , [ST] ST512R4A
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Read error

Operation Failed
Elapsed: 00:00:06
Reconnect Power/Cable!

Operation : Read PatternLock [ v1.05 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Device boot not done
Check Drivers
Try again

Boot Error!

Operation Failed
Elapsed: 00:00:39
Reconnect Power/Cable!

Operation : Read PatternLock [ v1.05 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 64 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575_S00
Processing BROM stage
i2c Init : 00000000
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0068 , [ST] ST512R4A
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 0000 0000
[NAND] : FLASH_LEN : 0x20000000
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Not supported FlashType for this operation

Done!
Elapsed: 00:00:01
Reconnect Power/Cable!

**InfinitySupport** · 11-02-2014, 19:00

Quote:

Originally Posted by ngocdiemmobile

add spd flash read write or fomat now . please

Its already supported.
Just download CM2SPD software from Infinity-Box support area and use it for SPD.

ngocdiemmobile · 11-03-2014, 01:06

Quote:

Originally Posted by InfinitySupport

Its already supported.
Just download CM2SPD software from Infinity-Box support area and use it for SPD.

support for spd 6820 6825 8820 8825 not right 6610 6610 sir

YellowBoss · 11-03-2014, 14:13

Quote:

Originally Posted by ngocdiemmobile

support for spd 6820 6825 8820 8825 not right 6610 6610 sir

Yes, Sir !
I completely agree with you.

10-23-2014, 20:58	#1 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,458 Member: 1043909 Status: Offline Thanks Meter: 60,926	Chinese Miracle-2 MTK/MediaTek v1.05 - Nokia 108/130/220/225 support Chinese Miracle-2 (Release) MTK/MediaTek v1.05 released Nokia 108/130/220/225 support MediaTek SP Platform Other: FlashInit improved Compile Info extraction improved FlashID database updated MediaTek FP Platform New CPU/Models supported: Nokia MT625A: Nokia 108 (RM-944, RM-945), Nokia 220 (RM-969, RM-970, RM-971) Nokia MT6260: Nokia 130 (RM-1035, RM-1036, RM-1037), Nokia 225 (RM-1011, RM-1012, RM-1043) Supported Features: Check/Read Info Format FS (Safe Format/Reset Settings) Other: Required to use special drivers for Nokia MTKx phones (uploaded on support) Flash Read/Write is useless due security protection Last edited by YellowBoss; 06-25-2020 at 11:05.

10-25-2014, 18:23	#2 (permalink)
saber1985 Freak Poster Join Date: Feb 2008 Posts: 229 Member: 714523 Status: Offline Thanks Meter: 22	Please add simlock unlock option for the mentioned Nokia phone models which have MTK based chips

11-02-2014, 08:41	#4 (permalink)
ngocdiemmobile No Life Poster Join Date: Jul 2012 Location: vietnam Posts: 905 Member: 1781157 Status: Offline Sonork: 100.1624851 Thanks Meter: 167	add spd flash read write or fomat now . please

11-02-2014, 09:11	#5 (permalink)
ngocdiemmobile No Life Poster Join Date: Jul 2012 Location: vietnam Posts: 905 Member: 1781157 Status: Offline Sonork: 100.1624851 Thanks Meter: 167	Card found: S/N Chinese Miracle II [MTK module] v 1.05 Operation : Read Flash [ v1.05 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 64 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6575 BB_CPU_HW : CB00 BB_CPU_SW : 8A00 BB_CPU_SB : E201 BB_CPU_NM : [MediaTek] MT6575_S00 Processing BROM stage i2c Init : 00000000 SpeedSet : 0000 VChrgSet : 0x28 , BatStat : 0x02 WD Disable stat : 0x0000 BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Stat : v3.2 on BBID : 0x84 DA Sent. Configure setting now ... NAND FlashIC initialized [NAND] : FLASH_VEN : 0x0068 , [ST] ST512R4A [NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 0000 0000 [NAND] : FLASH_LEN : 0x20000000 INT RAM : 0x00020000 EXT RAM : 0x10000000 BOOT TYPE : NAND_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Break by user Done! Elapsed: 00:00:11 Reconnect Power/Cable! Operation : Read Flash [ v1.05 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 64 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6575 BB_CPU_HW : CB00 BB_CPU_SW : 8A00 BB_CPU_SB : E201 BB_CPU_NM : [MediaTek] MT6575_S00 Processing BROM stage i2c Init : 00000000 SpeedSet : 0000 VChrgSet : 0x28 , BatStat : 0x02 WD Disable stat : 0x0000 BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Stat : v3.2 on BBID : 0x84 DA Sent. Configure setting now ... NAND FlashIC initialized [NAND] : FLASH_VEN : 0x0068 , [ST] ST512R4A [NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 0000 0000 [NAND] : FLASH_LEN : 0x20000000 INT RAM : 0x00020000 EXT RAM : 0x10000000 BOOT TYPE : NAND_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Conent now ... NAND settings not exists, will check now ... Settings read Ok! - > Re-connect battery and start operation again! Done! Elapsed: 00:00:10 Reconnect Power/Cable! Operation : Read Flash [ v1.05 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 64 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6575 BB_CPU_HW : CB00 BB_CPU_SW : 8A00 BB_CPU_SB : E201 BB_CPU_NM : [MediaTek] MT6575_S00 Processing BROM stage i2c Init : 00000000 SpeedSet : 0000 VChrgSet : 0x28 , BatStat : 0x02 WD Disable stat : 0x0000 BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Stat : v3.2 on BBID : 0x84 DA Sent. Configure setting now ... NAND FlashIC initialized [NAND] : FLASH_VEN : 0x0068 , [ST] ST512R4A [NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 0000 0000 [NAND] : FLASH_LEN : 0x20000000 INT RAM : 0x00020000 EXT RAM : 0x10000000 BOOT TYPE : NAND_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Conent now ... Read error Operation Failed Elapsed: 00:00:06 Reconnect Power/Cable! Operation : Read PatternLock [ v1.05 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Device boot not done Check Drivers Try again Boot Error! Operation Failed Elapsed: 00:00:39 Reconnect Power/Cable! Operation : Read PatternLock [ v1.05 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 64 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6575 BB_CPU_HW : CB00 BB_CPU_SW : 8A00 BB_CPU_SB : E201 BB_CPU_NM : [MediaTek] MT6575_S00 Processing BROM stage i2c Init : 00000000 SpeedSet : 0000 VChrgSet : 0x28 , BatStat : 0x02 WD Disable stat : 0x0000 BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending DA Stat : v3.2 on BBID : 0x84 DA Sent. Configure setting now ... NAND FlashIC initialized [NAND] : FLASH_VEN : 0x0068 , [ST] ST512R4A [NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 0000 0000 [NAND] : FLASH_LEN : 0x20000000 INT RAM : 0x00020000 EXT RAM : 0x10000000 BOOT TYPE : NAND_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Not supported FlashType for this operation Done! Elapsed: 00:00:01 Reconnect Power/Cable!