Chinese Miracle II-Ver 1.15 not saving MTK file in Bin format - GSM-Forum

thaquiattari · 03-25-2015, 15:47

Chinese Miracle II-Ver 1.15 not saving MTK file in Bin format

Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 27 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582|8312_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 110100303034473930514D216509B1D9
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : 09G40
[eMMC] : FLASH_CID : 110100303034473930514D216509B1D9
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Read Ok , collect info
Brand : Micromax
ProdName : hexing82_cwet_kk
ProdModel : Micromax A106
Device : hexing82_cwet_kk
AndroidVer: 4.4.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.KK1.MP1.V2.11
Saved to : C:\InfinityBox\CM2MTK\Flash\MT6582__MICROMAX__Micr omax_A106__ALPS.KK1.MP1.V2.11__Android_4.4.2__2015 0131_040628.ispff

Done!
Elapsed: 00:15:00
Reconnect Power/Cable!

Please help.

JayDi · 03-25-2015, 16:03

ispff - BIN file analog.
Better read FW instead of dumping full.

03-25-2015, 15:47	#1 (permalink)
thaquiattari Freak Poster Join Date: Jun 2011 Posts: 170 Member: 1603029 Status: Offline Thanks Meter: 20	Chinese Miracle II-Ver 1.15 not saving MTK file in Bin format Chinese Miracle II-Ver 1.15 not saving MTK file in Bin format Operation : Read Flash [ v1.15 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 27 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6582 BB_CPU_HW : CB00 BB_CPU_SW : 8A00 BB_CPU_SB : 0001 BB_CPU_NM : [MediaTek] MT6582\|8312_S00 Processing BROM stage SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending NAND_ID : 00000000000000000000000000000000 eMMC_ID : 110100303034473930514D216509B1D9 DA Stat : v4.2 on BBID : 0x87 DA Sent. Configure setting now ... DA started successuflly eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0011 , OEM : 0100 [eMMC] : FLASH_INF : 09G40 [eMMC] : FLASH_CID : 110100303034473930514D216509B1D9 [eMMC] : FLASH_LEN : 0x00000000EC000000 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Conent now ... Read Ok , collect info Brand : Micromax ProdName : hexing82_cwet_kk ProdModel : Micromax A106 Device : hexing82_cwet_kk AndroidVer: 4.4.2 MTKxCPU : MT6582 MTKxPRJ : ALPS.KK1.MP1.V2.11 Saved to : C:\InfinityBox\CM2MTK\Flash\MT6582__MICROMAX__Micr omax_A106__ALPS.KK1.MP1.V2.11__Android_4.4.2__2015 0131_040628.ispff Done! Elapsed: 00:15:00 Reconnect Power/Cable! Please help.

03-25-2015, 16:03	#2 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	ispff - BIN file analog. Better read FW instead of dumping full.