|
|
 |
|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
| |||||||
| Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
 |
| | LinkBack | Thread Tools | Display Modes |
02-04-2012, 09:57
| #1 (permalink) |
| Insane Poster  Join Date: Oct 2007
Posts: 60
Member: 599499 Status: Offline Thanks Meter: 1 | csl g6, MT6235b "startup code area #1 can't be fixed" http://www.infinity-box.com sales department: [email protected] support forum: http://forum.gsmhosting.com/vbb/f296/ Loading data, wait... [Infinity Box] MModule v4.13 smart-card: connected S/N: 32BB:0116 Wait... Device: _Autodetect MT6205-6239 NOR Initialization done Loading file v.02... TINNO35_09A_PCB01_GPRS_MT6235B_S01.E930_PR_F1_HY51 2_MY_CSL_33_08__firmware_20120202-182941.B4M.bin loaded usb bootloader (file) is absent rom info ver: 07 sw version: TINNO35_09A_PCB01_GPRS_MT6235B_S01.E930_PR_F1_HY51 2_MY_CSL_33_08.BIN project-id: E930_PR_F1_HY512_MY_CSL_33.08, 02A5B89C code offset: 00000000 ffs offset/size [01]: 02000000/02000000 rom info structure: [protected] type (07), 1 record(s) TCL-ID is absent file w/protection: startup code area #1 firmware date/time: 2010-05-12 13-26 hw1: TINNO35_09A_HW hw2: 09A_TINNO35_09A ==== [2012-2-2 18:38:30] ==== COM4 [VCP0] selected module v4.13 Device: _Autodetect MT6205-6239 NOR Checking data, wait... advanced flash detection enabled Action: write flash "smart write" active write: Firmware TINNO35_09A_PCB01_GPRS_MT6235B_S01.E930_PR_F1_HY51 2_MY_CSL_33_08__firmware_20120202-182941.B4M.bin skip: Customization/Language Pack skip: Customization skip: Eeprom/ffs ffs/eeprom backup enabled, it may takes several minutes ! ====> Boot ... Press and HOLD Power button now ! 19200 fixed Connecting, wait... Initializing [6235:8A04:8A01]... CPU: MT6235 high speed boot On chip: 0000:0000:0003 status: FF boot packet size: 0400 Release Power button now ! in case of initial connection problem: on/off "Boot baudrate autoselect" Boot Fail Finished, time used: 11 sec Remove/Install battery now ! Device: _Autodetect MT6228-6268 NAND Loading file v.02... TINNO35_09A_PCB01_GPRS_MT6235B_S01.E930_PR_F1_HY51 2_MY_CSL_33_08__firmware_20120202-182941.B4M.bin loaded usb bootloader (file) is absent rom info ver: 07 sw version: TINNO35_09A_PCB01_GPRS_MT6235B_S01.E930_PR_F1_HY51 2_MY_CSL_33_08.BIN project-id: E930_PR_F1_HY512_MY_CSL_33.08, 02A5B89C code offset: 00000000 ffs offset/size [01]: 02000000/02000000 rom info structure: [protected] type (07), 1 record(s) TCL-ID is absent file w/protection: startup code area #1 firmware date/time: 2010-05-12 13-26 hw1: TINNO35_09A_HW hw2: 09A_TINNO35_09A ==== [2012-2-2 18:39:32] ==== COM4 [VCP0] selected module v4.13 Device: _Autodetect MT6228-6268 NAND Checking data, wait... Action: write flash NAND write: Firmware TINNO35_09A_PCB01_GPRS_MT6235B_S01.E930_PR_F1_HY51 2_MY_CSL_33_08__firmware_20120202-182941.B4M.bin skip: Customization/Language Pack skip: Customization skip: Eeprom/ffs nfi area detection... bootloader version: TINNO35_09A_BOOTLOADER_V005_MT6235B_E930_PR_F1_HY5 12_MY_CSL_33_0 nfi area detection (3 cores) finished: Ok interface: BROM_DLL_v3.1016.00 Connect... Phone should be Switched OFF ! Press and HOLD Power button now ! Connecting... Booting... Release Power button now ! bootcode current/expected: 3.2/3.2 CPU: 6235:8A04:8A01 status: FF bbchip bl ver: FE NOR flash chip: not installed NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M chip size: 64Mb page/spare size: 0200/0010 pages per block: 0020 bits i/o: 08 address cycles: 04 internal RAM size: 00010000 external RAM: absent done Set baudrate (921600)... done ram test... testing 32bit... 32bit ram test passed testing 16bit... 16bit ram test passed ram test passed ===> detect existing firmware structure... detect ffs... detect sec ro... detect custom parameters... detect project-id... detect NAND info... number of areas/bytes to read: 1:00034000 reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)... nfi area detection... warning: nand header is empty: probably flash chip completely erased warning: can not detect header nfi area detection (0 cores) finished: failed warning: ffs can not be detected TCL-ID detection... TCL-ID detection done startup code area #1 detection... startup code area #1 detection done code offset: 00000000 ===> done nfi area detection... bootloader version: TINNO35_09A_BOOTLOADER_V005_MT6235B_E930_PR_F1_HY5 12_MY_CSL_33_0 nfi area detection (3 cores) finished: Ok startup code area #1 check... rpl file not found: C:\Program Files\InfinityBox\MModule\id.00006235.[TINNO35_09A_PCB01_GPRS_MT6235B_S01.E930_PR_F1_HY51 2_MY_CSL_33_08.BIN_9CB8A502].rpl rpl file not found: C:\Program Files\InfinityBox\MModule\id.00006235._TINNO35_09A _PCB01_GPRS_MT6235B_S01.E930_PR_F1_HY512_MY_CSL_33 _08.BIN_9CB8A502_.rpl rpl file not found: C:\Program Files\InfinityBox\MModule\backup_security\id.00006 235.[TINNO35_09A_PCB01_GPRS_MT6235B_S01.E930_PR_F1_HY51 2_MY_CSL_33_08.BIN_9CB8A502].rpl rpl file not found: C:\Program Files\InfinityBox\MModule\backup_security\id.00006 235._TINNO35_09A_PCB01_GPRS_MT6235B_S01.E930_PR_F1 _HY512_MY_CSL_33_08.BIN_9CB8A502_.rpl ==================== warning: unknown firmware: TINNO35_09A_PCB01_GPRS_MT6235B_S01.E930_PR_F1_HY51 2_MY_CSL_33_08.BIN_9CB8A502 Unknown firmware found (v.4.13, database date: 22.12.2011), user action required: 1. download latest software from support area and try again 2. if no still luck follow the next procedure: - find good working phone with the same firmware: TINNO35_09A_PCB01_GPRS_MT6235B_S01.E930_PR_F1_HY51 2_MY_CSL_33_08.BIN - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com - include in your e-mail full text from phone back label (phone name etc.) - be little bit patient and wait update ==================== error: startup code area #1 can't be fixed You can flash phone now but can not finalize it, in most cases phone CAN NOT power-on. Do you want to continue anyway ? number of cores: 3 loading files... number of areas: 3 done write... write bootloader... . . write core... Disconnect... done Finished, time used: 10 min 44 sec Remove/Install battery now ! https://rapidshare.com/files/2384319...182941.B4M.bin Last edited by InfinityHelp; 06-27-2020 at 10:05. Reason: legacy links removed |
 |
|
| Bookmarks |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Help: Forgot my 6110 user lock code!! | GByte9 | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 4 | 02-26-2016 14:52 |
| PIN1/PIN2 CODE | Jon | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 1 | 12-26-2012 04:40 |
| 5110 Security Code Help! | cahrisma | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 6 | 07-05-2010 09:04 |
| Orange IL, Nokia 5110 GSM codes... | rosso11 | Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) | 0 | 11-05-1999 21:38 |
|
|
Linear Mode
