G five u505 white display after flash - GSM-Forum

ABDUL RAJA · 01-25-2011, 17:41

G five u505 white display after flash

Before flash

1. Restart Complaint with G Five logo.

After flash

1. Mobile switch on and working but White display.

MT 6253

Quote:

Action: read/check information
Model: Autodetect 6253 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6253, E02
Hardware version: LCSH53_BU2_09A_HW
Software version: L5BMM23.9.52.1.0T02M
Software date: 2000.00.00
Barcode: G5BMM46010CJ05977 10

PASSIONATE_BOYS · 01-25-2011, 17:54

What was the version before flash?
Try to flash with the same version which was in phone before you flashed it.

Wr.

ABDUL RAJA · 01-25-2011, 17:56

Unfortuantely Back up not saved!!!

ABDUL RAJA · 01-25-2011, 18:11

When trying with another flash file now .....

This error coming........

Quote:

Action: write flash
write: Firmware
G-FIVE_U505_FREMEARE.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nor area detection...
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6253:8A02:8A00
status: FF
bbchip bl ver: FE
NOR flash id[00C0]: 0098:009E00000000 [TOSHIBA] TC58FYM7T8C
chip size: 16Mb
otp status/size: S_DA_NOR_OTP_EXIST/00020000
NAND flash chip: not installed
internal RAM size: 00020000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
error: can not set baudrate (921600): 0FA6:S_FT_CHANGE_BAUDRATE_FAIL
error: last error: 0FA6:S_FT_CHANGE_BAUDRATE_FAIL
Disconnect...
done
Finished, time used: 36 sec
Remove/Install battery now !

InfinityHelp · 01-25-2011, 23:31

hello!

first of all- find in china miracle folder file named operatio.log
open it with any text editor and find first operation which you did with this phone.
there you will see it's original version, post it here

ABDUL RAJA · 01-26-2011, 01:55

Quote:

Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6253, E02
Hardware version: LCSH53_BU2_09A_HW
Software version: L5BMM44.9.52.1.1T04M
Software date: 2000.00.00
Barcode: G5BMM46010CJ05977 10
imei-1: 35602*********
imei-2: 35602*********
imei-3: 35602*********
Finished, time used: 2 sec
Remove/Install battery now !

This is the first read information!!!

ABDUL RAJA · 01-26-2011, 02:20

Now what to do for this new problem

error: can not set baudrate (921600): 0FA6:S_FT_CHANGE_BAUDRATE_FAIL
error: last error: 0FA6:S_FT_CHANGE_BAUDRATE_FAIL

Quote:

COM79 [VCP0] selected
module v3.26
Device: Autodetect 6253 NOR
Checking data, wait...
Action: write flash
write: Firmware
JWT_Z120B_002_PCB01_GPRS_MT6253_S00.L5BMM02_9_52_1 _3T05M0717_M700__G-Five-U899_2010-07-17_16m_En_Fr_Es_Id_Th_Hi_Urdu_Farsi_Pt_Ar.B0M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nor area detection...
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6253:8A02:8A00
status: FF
bbchip bl ver: FE
NOR flash id[00C0]: 0098:009E00000000 [TOSHIBA] TC58FYM7T8C
chip size: 16Mb
otp status/size: S_DA_NOR_OTP_EXIST/00020000
NAND flash chip: not installed
internal RAM size: 00020000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
error: can not set baudrate (921600): 0FA6:S_FT_CHANGE_BAUDRATE_FAIL
error: last error: 0FA6:S_FT_CHANGE_BAUDRATE_FAIL
Disconnect...
done
Finished, time used: 38 sec
Remove/Install battery now !

InfinityHelp · 01-26-2011, 20:54

hello!

use slower speed.
and post some part of log where is FULL software version is visable.

ABDUL RAJA · 01-27-2011, 01:48

Even i tried with 115200, But same Result

ABDUL RAJA · 01-27-2011, 01:49

Finally i returned the Phone to the customer!!!

amn32 · 01-27-2011, 06:05

Quote:

Originally Posted by ABDUL RAJA

Finally i returned the Phone to the customer!!!

Very very good decision .Head ach is very harmfull to life.

baggateletron · 12-20-2011, 13:07

brother > restore manuly,
white display & display coler problam will solve.

shotcut key menu>7>4> securitycode 0000 ok

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need to flash 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	08-16-2019 19:37
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
blue Display in Nokia Cellphones	TheDon	Nokia Hardware & Hardware Repair	0	10-29-1999 18:28

01-25-2011, 17:54	#2 (permalink)
PASSIONATE_BOYS No Life Poster Join Date: Jul 2007 Location: Infinity-Box Support- Posts: 9,321 Member: 541591 Status: Offline Sonork: 100.1611509 Thanks Meter: 7,361	What was the version before flash? Try to flash with the same version which was in phone before you flashed it. Wr.

01-25-2011, 17:56	#3 (permalink)
ABDUL RAJA No Life Poster Join Date: Dec 2007 Location: INDIA Posts: 1,501 Member: 665989 Status: Offline Sonork: 100.1597348 Thanks Meter: 552	Unfortuantely Back up not saved!!!

01-25-2011, 23:31	#5 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! first of all- find in china miracle folder file named operatio.log open it with any text editor and find first operation which you did with this phone. there you will see it's original version, post it here

01-26-2011, 20:54	#8 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! use slower speed. and post some part of log where is FULL software version is visable.

01-27-2011, 01:48	#9 (permalink)
ABDUL RAJA No Life Poster Join Date: Dec 2007 Location: INDIA Posts: 1,501 Member: 665989 Status: Offline Sonork: 100.1597348 Thanks Meter: 552	Even i tried with 115200, But same Result

01-27-2011, 01:49	#10 (permalink)
ABDUL RAJA No Life Poster Join Date: Dec 2007 Location: INDIA Posts: 1,501 Member: 665989 Status: Offline Sonork: 100.1597348 Thanks Meter: 552	Finally i returned the Phone to the customer!!!

12-20-2011, 13:07	#12 (permalink)
baggateletron Freak Poster Join Date: Jul 2011 Location: Hoshiarpur,India Age: 39 Posts: 205 Member: 1608238 Status: Offline Thanks Meter: 26	brother > restore manuly, white display & display coler problam will solve. shotcut key menu>7>4> securitycode 0000 ok