Infinity Team , How to Fix ''NFB_BLOCK_0_IS_BAD'' after flash full - GSM-Forum

let go · 11-25-2011, 11:23

Phone is automatic on/off . i flashing fw in site after phone dead . . continue reflash but not success . Pls check erro and fix my problems when flashing fone .

Quote:

COM6 [Serial2] selected
module v4.10
Device: _Autodetect MT6228-6268 NAND
Checking data, wait...
Action: write flash NAND
write: Firmware
E710_JJF070MULXF_PCB01_GPRS_MT6235B_S01.01_0__Lefo no-L007_2010-07-22_COMMON_200W30W10W_128m_En_Ru_Gr_Nl_Fr_Es_It_Pl_ De_Tr_Farsi_Pt_Bg_Cz_Ar.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
external bootloader is not present
bootloader version: E710_BOOTLOADER_V005_MT6235B_01_1.bin
nfi area detection (3 cores) finished: Ok
"format ffs" active
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0058]: 002C:00A100800015 [MICRON] MT29F1G08ABB
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===> detect existing firmware structure...
detect ffs...
detect sec ro...
detect custom parameters...
detect project-id...
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
warning: incorrect nand header: 6B0026B44F648B42264A13B354C9A790
warning: can not detect header
nfi area detection (0 cores) finished: failed
warning: ffs can not be detected
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
code offset: 00000000
===> done
nfi area detection...
external bootloader is not present
bootloader version: E710_BOOTLOADER_V005_MT6235B_01_1.bin
nfi area detection (3 cores) finished: Ok
startup code area #1 check...
done
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
error: can not write flash (0): 0C18:S_DA_NFB_BLOCK_0_IS_BAD
error: last error: 0C18:S_DA_NFB_BLOCK_0_IS_BAD
Disconnect...
done
Finished, time used: 55 sec
Remove/Install battery now !

YellowBoss · 11-25-2011, 13:24

Code:

error: can not write flash (0): 0C18:S_DA_NFB_BLOCK_0_IS_BAD
error: last error: 0C18:S_DA_NFB_BLOCK_0_IS_BAD

this means that phone flash chip is damaged and should be replaced.

11-25-2011, 13:24	#2 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,476 Member: 1043909 Status: Offline Thanks Meter: 60,926	Code: error: can not write flash (0): 0C18:S_DA_NFB_BLOCK_0_IS_BAD error: last error: 0C18:S_DA_NFB_BLOCK_0_IS_BAD this means that phone flash chip is damaged and should be replaced.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-27-2015 11:57
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-21-2013 19:20
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29