Iphone J2000;software or hw problem?!?

[Burebista]

I have this phone with restarting problem with sim inside but It's giving me error every time when I connect it to the computer for formating,reading info's,reading fullflash...

==== log: [1/11/2010 9:41:41 AM] ====
COM3 [VCP5] selected
module  v3.05
Device: Autodetect 6228-6239 NAND
Checking data, wait...
Action: reset settings ("format ffs") NAND
interface: BROM_DLL_v3.932.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
CPU: 6235:8A04:8A01
bbchip secure ver: FF
bbchip bl ver: FE
NOR flash chip: S_DA_NOR_FLASH_NOT_FOUND
NAND flash chip: S_DONE
flash id[0058]: 002C:00A100800095 [MICRON] MT29F1G08ABB
flash size: 128Mb
page/spare size: 0800/0040
pages/block: 0040
bits i/o: 08
address cycles: 04
internal RAM: S_DONE
size: 00010000
external RAM: S_DA_DEVICE_NOT_FOUND
boot style: S_NAND_FLASH_BOOT
bootcode current/expected: 3.2, 3.2
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 03000000/05000000
firmware size: 48Mb
ffs size: 80Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: E709_JXLC1.01.0
detect NAND info...
number of areas to read: 1
reading (HW_STORAGE_NAND)...
nfi area detection...
external bootloader is not present
bootloader version: E709_BOOTLOADER_V005_MT6235B_01_1.bin
nfi area detection finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 05
sw version: E709_JXLC1_PCB01_GPRS_MT6235B_S01.01_0.BIN
project-id: E709_JXLC1.01.0, 00000000
code offset: 00000000
ffs offset/size [01]: 03000000/05000000
rom info structure: 2nd [standard] generation
TCL-ID is absent
===>  done
====================
New firmware detected (v.3.05, database date: 09.01.2010): 
E709_JXLC1_PCB01_GPRS_MT6235B_S01.01_0.BIN
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: mt62xx@gmail.com or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)

I've post here the log from formating operation and an screenshot.

[InfinitySupport]

Hello,

It's hard to say what is the reason of this problem.

Could you, please, try to make "format" operation at other PC ?
Also, yt to use previous ChineseMiracle software version (you can download it from support area software/updates/archive folder).
Let's see results.

[webiso]

if you need pin number 13 rx 11 tx