new user please help me - GSM-Forum

mobilepoint · 05-25-2010, 14:20

i bought a pinfinder to day, but i cannot use it,please help me urgent,,,,,,,,,,,software version: 1.20
cable type: 1x12 (L12C)
platform: MT: MT6205, MT6217-MT6235
searching adapter at COM10...
adapter found, version: 2000
pins: 12, plain
power cycles: 1
activation cycles: 25
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
failed to detect pins
time required: 138 sec
Trying to Power-On...
Power On !
Set parameter to value 20 (or more) and repeat operation (parameter "Finder activation tries")

naderhacker · 05-25-2010, 14:26

what is the phone type my be it is a spread trum cpu

mobilepoint · 05-26-2010, 07:31

E 78 and sigmatel s4,,,,,,,,,,,,,,,,,,,

InfinityHelp · 05-26-2010, 21:08

hello!

before searching pinout you must do 3 easy steps:

1. Make sure that this is mt62xx MCU based phone.
tip: you can check this by typing *#0044# and pressing green (send) button.
if you will see "language set: english"- you can be sure, that this phone is MT62xx.
Now activate Silent mode in phone by pressing and holding "#".

2. Count number of pins in system connector. After this is done-
pick correspondent cable. For example if you counted 2x6 pins- it is in total 12
so no point to put L14D cable instead of correct one, L12B.

3. Select cable type, connect power crocodiles in the place of battery.
push "Power On!" in software. Now phone is powered with pinfinder power.
Try to switch it On. This is main rule for success pinout search.
(Phone must turn ON)

if it does not turn On- no point to search for pinouts. you will not find it.
Start from modifying your main infinity box to deliver more power to pinfinder.
There is one diode which must be removed and shortcutted.
Open Pinfinder User Manual on Trubleshooting section and see in pictures how this must be done.

after you get phone powered- you are ready to find phone pinout.
press and Hold phone power button and start search.

05-25-2010, 14:20	#1 (permalink)
mobilepoint No Life Poster Join Date: Nov 2005 Posts: 554 Member: 201343 Status: Offline Thanks Meter: 26	new user please help me i bought a pinfinder to day, but i cannot use it,please help me urgent,,,,,,,,,,,software version: 1.20 cable type: 1x12 (L12C) platform: MT: MT6205, MT6217-MT6235 searching adapter at COM10... adapter found, version: 2000 pins: 12, plain power cycles: 1 activation cycles: 25 power-off delay: 20 start Rx/Tx: 1/1 Loading configuration... Initializing... Press and HOLD phone Power button now ! detecting pins... failed to detect pins time required: 138 sec Trying to Power-On... Power On ! Set parameter to value 20 (or more) and repeat operation (parameter "Finder activation tries")

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
New Nokia Software!!!!!!!	Jefferson	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	52	12-30-2016 08:17
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29

05-25-2010, 14:26	#2 (permalink)
naderhacker Freak Poster Join Date: Apr 2001 Location: EVRYWERE Posts: 492 Member: 4365 Status: Offline Thanks Meter: 39	what is the phone type my be it is a spread trum cpu

05-26-2010, 07:31	#3 (permalink)
mobilepoint No Life Poster Join Date: Nov 2005 Posts: 554 Member: 201343 Status: Offline Thanks Meter: 26	E 78 and sigmatel s4,,,,,,,,,,,,,,,,,,,

05-26-2010, 21:08	#4 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! before searching pinout you must do 3 easy steps: 1. Make sure that this is mt62xx MCU based phone. tip: you can check this by typing *#0044# and pressing green (send) button. if you will see "language set: english"- you can be sure, that this phone is MT62xx. Now activate Silent mode in phone by pressing and holding "#". 2. Count number of pins in system connector. After this is done- pick correspondent cable. For example if you counted 2x6 pins- it is in total 12 so no point to put L14D cable instead of correct one, L12B. 3. Select cable type, connect power crocodiles in the place of battery. push "Power On!" in software. Now phone is powered with pinfinder power. Try to switch it On. This is main rule for success pinout search. (Phone must turn ON) if it does not turn On- no point to search for pinouts. you will not find it. Start from modifying your main infinity box to deliver more power to pinfinder. There is one diode which must be removed and shortcutted. Open Pinfinder User Manual on Trubleshooting section and see in pictures how this must be done. after you get phone powered- you are ready to find phone pinout. press and Hold phone power button and start search.