Please help, chinese miracle cannot read firmware. - GSM-Forum

mentari · 02-17-2011, 13:01

hi.

@ infinity support.

i want to read china phone on MTK6253 nor chip, but no success.

here is the logs.

COM6 [VCP0] selected
module v3.26
Device: Autodetect 6253 NOR
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6253:8A02:8A00
status: FF
bbchip bl ver: FE
NOR flash id[00C1]: 00EC:240400000000 [SAMSUNG] K5N2833ATB
chip size: 16Mb
otp status/size: S_DA_NOR_OTP_NOT_SUPPORT/00000000
NAND flash chip: not installed
internal RAM size: 00020000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
error: can not set baudrate (921600): 0FA6:S_FT_CHANGE_BAUDRATE_FAIL
error: last error: 0FA6:S_FT_CHANGE_BAUDRATE_FAIL
Disconnect...
done
Finished, time used: 39 sec
Remove/Install battery now !

Note : already change baud rate to 1152, 2300, 4800 same results.

thank you.

InfinityHelp · 02-17-2011, 21:12

hello!

is this full working phone?

mentari · 02-17-2011, 22:04

Thanks for reply,,
Yes ,, its fully working phone,,

YellowBoss · 02-19-2011, 21:42

Please, try to press and HOLD phone "Power" button more long time.

Waiting for your results !

02-17-2011, 13:01	#1 (permalink)
mentari No Life Poster Join Date: Sep 2003 Age: 43 Posts: 635 Member: 39948 Status: Offline Thanks Meter: 68	Please help, chinese miracle cannot read firmware. hi. @ infinity support. i want to read china phone on MTK6253 nor chip, but no success. here is the logs. COM6 [VCP0] selected module v3.26 Device: Autodetect 6253 NOR Checking data, wait... Action: read firmware NAND interface: BROM_DLL_v3.1016.00 Connect... Phone should be Switched OFF ! Press and HOLD Power button now ! Connecting... Booting... Release Power button now ! bootcode current/expected: 3.2/3.2 CPU: 6253:8A02:8A00 status: FF bbchip bl ver: FE NOR flash id[00C1]: 00EC:240400000000 [SAMSUNG] K5N2833ATB chip size: 16Mb otp status/size: S_DA_NOR_OTP_NOT_SUPPORT/00000000 NAND flash chip: not installed internal RAM size: 00020000 external RAM: S_DA_RAM_ERROR done Set baudrate (921600)... error: can not set baudrate (921600): 0FA6:S_FT_CHANGE_BAUDRATE_FAIL error: last error: 0FA6:S_FT_CHANGE_BAUDRATE_FAIL Disconnect... done Finished, time used: 39 sec Remove/Install battery now ! Note : already change baud rate to 1152, 2300, 4800 same results. thank you.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29
Eeprom dump lost, help needed.	CAMILO	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:04
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29

02-17-2011, 21:12	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! is this full working phone?

02-17-2011, 22:04	#3 (permalink)
mentari No Life Poster Join Date: Sep 2003 Age: 43 Posts: 635 Member: 39948 Status: Offline Thanks Meter: 68	Thanks for reply,, Yes ,, its fully working phone,,

02-19-2011, 21:42	#4 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,458 Member: 1043909 Status: Offline Thanks Meter: 60,926	Please, try to press and HOLD phone "Power" button more long time. Waiting for your results !