plse give me the true pinout for n95 slider - GSM-Forum

laythjg09 · 08-02-2007, 18:11

in the pinout program i found this

Nokia-N95 slider
keyboard top, connector_1x12_mini
1: Gnd
6: Tx
7: Rx
====================

i cinnect all pins put not work

so i checked Gnd point i found its pin 12 not pin 1

i used the same pins for n99

Nokia-N99
keyboard top, connector_1x12_mini
6: Tx
7: Rx
12: Gnd
====================

but the same doesnt work ,plse give me the true pinout for this model

InfinityHelp · 08-02-2007, 19:45

hello!

there are many same model phones with different pinout.
That is why before making cable- check with multimeter if GND and charging pins are on same place as described. If not- no point to build it, it will not work.

for menthioned above phone i see only one way:
Connect GND and try as tx and rx all phone pins.

of course, still remain hope that some of forum users have found pinout and share with us

eivoig · 08-02-2007, 19:55

invert the pinouts outs brother pinouts is 8@12 gnd 6 rx 7 tx

laythjg09 · 08-03-2007, 08:33

Quote:

Originally Posted by eivoig

invert the pinouts outs brother pinouts is 8@12 gnd 6 rx 7 tx

i did and still same

laythjg09 · 08-03-2007, 08:39

Quote:

Originally Posted by InfinityHelp

hello!

there are many same model phones with different pinout.
That is why before making cable- check with multimeter if GND and charging pins are on same place as described. If not- no point to build it, it will not work.

for menthioned above phone i see only one way:
Connect GND and try as tx and rx all phone pins.

of course, still remain hope that some of forum users have found pinout and share with us

better for me waiting update for your pinout program

laythjg09 · 08-03-2007, 08:53

in fact i didnt connect the Gnd to any pin i connected it to metal
and

6: rx , 7:tx
7: rx , 6:rx

the same box couldnt see the phone

mughalG · 08-03-2007, 13:23

Quote:

Originally Posted by laythjg09

in the pinout program i found this

Nokia-N95 slider
keyboard top, connector_1x12_mini
1: Gnd
6: Tx
7: Rx
====================

i cinnect all pins put not work

so i checked Gnd point i found its pin 12 not pin 1

i used the same pins for n99

Nokia-N99
keyboard top, connector_1x12_mini
6: Tx
7: Rx
12: Gnd
====================

but the same doesnt work ,plse give me the true pinout for this model

hello
try this 100%tested by me

1 tx...........2rx...........6gnd
WBR

laythjg09 · 08-03-2007, 15:25

Quote:

Originally Posted by mughalG

hello
try this 100%tested by me

1 tx...........2rx...........6gnd
WBR

doesnt work because pin 1 charging

for my phone pin (8 & 12) are Gnd

ash nou · 08-03-2007, 18:35

nokia n99 usb soket has only 10 legs
i need too pinout for this model and arabic flash file
thanks

yousha · 08-12-2007, 12:37

Quote:

Originally Posted by laythjg09

doesnt work because pin 1 charging

for my phone pin (8 & 12) are Gnd

me too hav got the same N95 which has 8 and 12 as GND and i need the pinouts too

shinod · 12-05-2007, 04:52

n95 sliding please try with this

08-02-2007, 18:11	#1 (permalink)
laythjg09 Freak Poster Join Date: Jan 2006 Location: I r a q Posts: 336 Member: 218192 Status: Offline Thanks Meter: 25	plse give me the true pinout for n95 slider in the pinout program i found this Nokia-N95 slider keyboard top, connector_1x12_mini 1: Gnd 6: Tx 7: Rx ==================== i cinnect all pins put not work so i checked Gnd point i found its pin 12 not pin 1 i used the same pins for n99 Nokia-N99 keyboard top, connector_1x12_mini 6: Tx 7: Rx 12: Gnd ==================== but the same doesnt work ,plse give me the true pinout for this model

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
give me the cable pinout pic for new t156	pakmobiles	FuriousGold	5	12-06-2009 16:32
any buddy plz give me the .rpl file for my nokia 1110 rh-70 i give you thats ask	ankitmodi	Nokia Hardware & Hardware Repair	0	07-30-2008 17:16
pinout for n95 slider not work	SGHGSM 3	Infinity-Box	4	12-03-2007 09:05
could someone give me the Screensave patch for C55?	steven ran	x4x, x5x Flashpatching	0	11-17-2005 10:30

08-02-2007, 19:45	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! there are many same model phones with different pinout. That is why before making cable- check with multimeter if GND and charging pins are on same place as described. If not- no point to build it, it will not work. for menthioned above phone i see only one way: Connect GND and try as tx and rx all phone pins. of course, still remain hope that some of forum users have found pinout and share with us

08-02-2007, 19:55	#3 (permalink)
eivoig No Life Poster Join Date: Jul 2001 Location: Spinning on my OWN Orbit Posts: 968 Member: 5358 Status: Offline Thanks Meter: 211	invert the pinouts outs brother pinouts is 8@12 gnd 6 rx 7 tx

08-03-2007, 08:53	#6 (permalink)
laythjg09 Freak Poster Join Date: Jan 2006 Location: I r a q Posts: 336 Member: 218192 Status: Offline Thanks Meter: 25	in fact i didnt connect the Gnd to any pin i connected it to metal and 6: rx , 7:tx 7: rx , 6:rx the same box couldnt see the phone

08-03-2007, 18:35	#9 (permalink)
ash nou Insane Poster Join Date: Apr 2002 Location: MX-KEY is the BEST NOKIA TOOL Age: 54 Posts: 61 Member: 11419 Status: Offline Thanks Meter: 12	nokia n99 usb soket has only 10 legs i need too pinout for this model and arabic flash file thanks