|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source | Search | Today's Posts | Mark Forums Read |
| LinkBack | Thread Tools | Display Modes |
03-25-2011, 07:38 | #1 (permalink) |
No Life Poster Join Date: Oct 2005 Location: P A K I S T A N Age: 16
Posts: 1,387
Member: 190344 Status: Offline Thanks Meter: 280 | Qmobile e900 MODEL Q MOBILE E900 READ FLASH OK USER CODE RESET NOT DONE SAFE FORMAT DONE BACK UP FULL FLASH DONE http://www.4shared.com/file/0fPWvcqD...S_MT6235B.html Uploaded with ImageShack.us LOG IS ==== c:\InfinityBox\ChineseMiracle\ChineseMiracle.exe [3/21/2011 2:18:21 PM] ==== Infinity-Box - About support forum: Infinity-Box - GSM-Forum Loading data, wait... [Infinity Box] Chinese Miracle v3.27 smart-card: connected S/N: 66F0:0116 Wait... Device: Autodetect 6205-6239 NOR Done Device: Autodetect 6253 NOR Device: Autodetect 6205-6239 NOR ==== [3/21/2011 2:18:52 PM] ==== COM24 [VCP0] selected module v3.27 Action: read unlock codes unlock method: read codes Model: Autodetect 6205-6239 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6235:8A04:8A01]... CPU: MT6235 high speed boot On chip: 0000:0000:0003 status: FF rom: 4D573031 Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6235,E04 Date: 2000.00.00 Version: 1.0 Version: E930_MP_F1_PK_V34_11 Version: TINNO35_09A_HW detecting structure #2... 1 2 5 7 8 9 11 13 20 21warning: wrong packet cs 24 26 27 28 30 32error: detection failed (16 tries), read flash and send to support connection Ok detecting structure #1... 0 3 4 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35error: detection failed (32 tries), read flash and send to support error: can't read required data error: operation failed ! Finished, time used: 2 min 10 sec Remove/Install battery now ! ==== [3/21/2011 2:21:24 PM] ==== COM24 [VCP0] selected module v3.27 Action: read unlock codes unlock method: read codes Model: Autodetect 6205-6239 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! error: can't activate test mode error: operation failed ! Finished, time used: 1 sec Remove/Install battery now ! Device: Autodetect 6253 NOR ==== [3/21/2011 2:21:41 PM] ==== COM24 [VCP0] selected module v3.27 Action: read unlock codes unlock method: read codes Model: Autodetect 6253 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6235:8A04:8A01]... CPU: MT6235 high speed boot On chip: 0000:0000:0003 status: FF rom: 4D573031 Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6235,E04 Date: 2000.00.00 Version: 1.0 Version: E930_MP_F1_PK_V34_11 Version: TINNO35_09A_HW detecting structure #2... 1 2 5 7 8 9 11 13 20 21warning: wrong packet cs 24 26 27 28 30 32error: detection failed (16 tries), read flash and send to support connection Ok detecting structure #1... 0 3 4 7 8 9 10 11 12 13 ==== c:\InfinityBox\ChineseMiracle\ChineseMiracle.exe [3/21/2011 2:24:39 PM] ==== Infinity-Box - About support forum: Infinity-Box - GSM-Forum Loading data, wait... [Infinity Box] Chinese Miracle v3.27 smart-card: connected S/N: 66F0:0116 Wait... Device: Autodetect 6205-6239 NOR Done ==== c:\InfinityBox\ChineseMiracle\ChineseMiracle.exe [3/22/2011 11:55:36 AM] ==== Infinity-Box - About BB5 Easy Service Tool - Infinity-CDMA Tool PinFinder Adapter Language Pack Editor Dongle Content Extractor Dongle sales department: [email protected] support forum: Infinity-Box - GSM-Forum Loading data, wait... [Infinity Box] Chinese Miracle v3.28 smart-card: connected S/N: 66F0:0116 Wait... Device: Autodetect 6205-6239 NOR Done ==== [3/22/2011 11:55:55 AM] ==== COM22 [VCP0] selected module v3.28 Action: read unlock codes unlock method: read codes Model: Autodetect 6205-6239 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! error: can't activate test mode error: operation failed ! Finished, time used: 13 sec Remove/Install battery now ! ==== c:\InfinityBox\ChineseMiracle\ChineseMiracle.exe [3/22/2011 11:56:41 AM] ==== Infinity-Box - About sales department: [email protected] support forum: Infinity-Box - GSM-Forum Loading data, wait... [Infinity Box] Chinese Miracle v3.28 smart-card: connected S/N: 66F0:0116 Wait... Device: Autodetect 6205-6239 NOR Done ==== [3/22/2011 11:56:51 AM] ==== COM22 [VCP0] selected module v3.28 Action: read unlock codes unlock method: read codes Model: Autodetect 6205-6239 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! error: can't activate test mode error: operation failed ! Finished, time used: 15 sec Remove/Install battery now ! ==== c:\InfinityBox\ChineseMiracle\ChineseMiracle.exe [3/22/2011 11:57:24 AM] ==== Infinity-Box - About support forum: Infinity-Box - GSM-Forum Loading data, wait... [Infinity Box] Chinese Miracle v3.28 smart-card: connected S/N: 66F0:0116 Wait... Device: Autodetect 6205-6239 NOR Done ==== [3/22/2011 11:59:11 AM] ==== COM24 [VCP1] selected module v3.28 Action: read unlock codes unlock method: read codes Model: Autodetect 6205-6239 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6235:8A04:8A01]... CPU: MT6235 high speed boot On chip: 0000:0000:0003 status: FF rom: 4D573031 Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6235,E04 Date: 2000.00.00 Version: 1.0 Version: E930_MP_F1_PK_V34_11 Version: TINNO35_09A_HW ==================== New firmware found (v.3.28, database date: 20.03.2011): E930_MP_F1_PK_V34_11 This firmware is missing in support area. If this phone is good and working: - download latest software from support area and try again, probably this firmware already supported in latest software - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage - include in your e-mail full text from phone back label (phone name etc.) ==================== detecting structure #2... 1 2 5 7 8 9 11 13 21 22 25 27 28 29 31 33error: detection failed (16 tries), read flash and send to support connection Ok detecting structure #1... 0 3 4 7 8 12 13 14 17 19 22 23 26 27 28 29 30 31 32 33 34 35 36 37error: detection failed (24 tries), read flash and send to support error: can't read required data error: operation failed ! Finished, time used: 1 min 2 sec Remove/Install battery now ! ==== [3/22/2011 12:00:44 PM] ==== COM24 [VCP1] selected module v3.28 Device: Autodetect 6205-6239 NOR Checking data, wait... advanced flash detection enabled Action: read flash ====> Boot ... Press and HOLD Power button now ! 19200 fixed Connecting, wait... Initializing [6235:8A04:8A01]... CPU: MT6235 high speed boot On chip: 0000:0000:0003 status: FF boot packet size: 0400 Release Power button now ! in case of initial connection problem: on/off "Boot baudrate autoselect" Boot Fail Finished, time used: 10 sec Remove/Install battery now ! ==== [3/22/2011 12:01:14 PM] ==== COM24 [VCP1] selected module v3.28 Device: Autodetect 6205-6239 NOR Checking data, wait... advanced flash detection enabled Action: read flash ====> Boot ... Press and HOLD Power button now ! error: can't detect device Release Power button now ! in case of initial connection problem: on/off "Boot baudrate autoselect" Boot Fail Finished, time used: 2 sec Remove/Install battery now ! Device: Autodetect 6228-6268 NAND ==== [3/22/2011 12:01:28 PM] ==== COM24 [VCP1] selected module v3.28 Action: read unlock codes unlock method: read codes Model: Autodetect 6228-6268 NAND Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6235:8A04:8A01]... CPU: MT6235 high speed boot On chip: 0000:0000:0003 status: FF rom: 4D573031 Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6235,E04 Date: 2000.00.00 Version: 1.0 Version: E930_MP_F1_PK_V34_11 Version: TINNO35_09A_HW ==================== New firmware found (v.3.28, database date: 20.03.2011): E930_MP_F1_PK_V34_11 This firmware is missing in support area. If this phone is good and working: - download latest software from support area and try again, probably this firmware already supported in latest software - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage - include in your e-mail full text from phone back label (phone name etc.) ==================== detecting structure #2... 1 2 5 7 8 9 11 13 21 22 25 27 28 29 31 33error: detection failed (16 tries), read flash and send to support connection Ok detecting structure #1... 0 3 4 7 8 12 13 14 17 19 22 23 26 27 28 29 30 31 32 33 34 35 36 37error: detection failed (24 tries), read flash and send to support error: can't read required data error: operation failed ! Finished, time used: 1 min 6 sec Remove/Install battery now ! In most cases you can read "firmware" instead of "full flash", it may helps to save a lot of time with the same functionality. Suggestion: read "firmware" now Do you want to read "firmware" instead of "full flash" ? ==== [3/22/2011 12:02:52 PM] ==== COM24 [VCP1] selected module v3.28 Device: Autodetect 6228-6268 NAND Checking data, wait... Action: read firmware NAND interface: BROM_DLL_v3.1016.00 Connect... Phone should be Switched OFF ! Press and HOLD Power button now ! Connecting... Booting... Release Power button now ! bootcode current/expected: 3.2/3.2 CPU: 6235:8A04:8A01 status: FF bbchip bl ver: FE NOR flash chip: not installed NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M chip size: 64Mb page/spare size: 0200/0010 pages per block: 0020 bits i/o: 08 address cycles: 04 internal RAM size: 00010000 external RAM: S_DA_RAM_ERROR done Set baudrate (921600)... done ram test... testing 32bit... 32bit ram test passed testing 16bit... 16bit ram test passed ram test passed ===> detect existing firmware structure... detect ffs... ffs offset/size: 02000000/02000000 firmware size: 32Mb ffs size: 32Mb detect sec ro... detect custom parameters... detect project-id... project-id: E930_MP_F1_PK_V34_11 detect NAND info... number of areas/bytes to read: 1:00034000 reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)... nfi area detection... bootloader version: TINNO35_09A_BOOTLOADER_V005_MT6235B_E930_MP_F1_PK_ V34_11.bin nfi area detection (3 cores) finished: Ok TCL-ID detection... TCL-ID detection done startup code area #1 detection... number of areas/bytes to read: 1:00004000 reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)... number of areas/bytes to read: 1:00004000 reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)... startup code area #1 is valid startup code area #1 detection done rom info ver: 07 sw version: TINNO35_09A_PCB01_GPRS_MT6235B_S01.E930_MP_F1_PK_V 34_11.BIN project-id: E930_MP_F1_PK_V34_11, A8405AA5 code offset: 00000000 ffs offset/size [01]: 02000000/02000000 rom info structure: [protected] type (07), 1 record(s) TCL-ID is absent ===> done ==================== New firmware found (v.3.28, database date: 20.03.2011): TINNO35_09A_PCB01_GPRS_MT6235B_S01.E930_MP_F1_PK_V 34_11.BIN This firmware is missing in support area. If this phone is good and working: - download latest software from support area and try again, probably this firmware already supported in latest software - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage - include in your e-mail full text from phone back label (phone name etc.) ==================== area size: 32Mb number of areas/bytes to read: 1:02000000 reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)... file saved: C:\Documents and Settings\Administrator\Desktop\TINNO35_09A_PCB01_G PRS_MT6235B_S01.E930_MP_F1_PK_V34_11__firmware_201 10322-121539.B4M.bin Disconnect... done file saved: c:\InfinityBox\ChineseMiracle\backup_security\TINN O35_09A_PCB01_GPRS_MT6235B_S01.E930_MP_F1_PK_V34_1 1__system_log_20110322-121612.B4X.bin Finished, time used: 13 min 20 sec Remove/Install battery now ! WARNING ! Settings will be cleared, user data erased, Imei set to default value ! Make flash backup before this procedure ! Do you want to continue ? ==== [3/22/2011 12:16:29 PM] ==== COM24 [VCP1] selected module v3.28 Action: reset settings ("format ffs") Model: Autodetect 6228-6268 NAND Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6235:8A04:8A01]... CPU: MT6235 high speed boot On chip: 0000:0000:0003 status: FF rom: 4D573031 Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6235,E04 Date: 2000.00.00 Version: 1.0 Version: E930_MP_F1_PK_V34_11 Version: TINNO35_09A_HW ==================== New firmware found (v.3.28, database date: 20.03.2011): E930_MP_F1_PK_V34_11 This firmware is missing in support area. If this phone is good and working: - download latest software from support area and try again, probably this firmware already supported in latest software - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage - include in your e-mail full text from phone back label (phone name etc.) ==================== detecting structure #2... 1 2 5 7 8 9 11 13 21 22 25 27 28 29 31 33error: detection failed (16 tries), read flash and send to support connection Ok building list... done items to clear: 329 warning: wrong packet cs warning: wrong packet cs items cleared: 156 of 329 items remains: 0 error: operation failed ! Finished, time used: 1 min 45 sec Remove/Install battery now ! Device: Autodetect 6205-6239 NOR WARNING ! Settings will be cleared, user data erased, Imei set to default value ! Make flash backup before this procedure ! Do you want to continue ? ==== [3/22/2011 12:18:26 PM] ==== COM24 [VCP1] selected module v3.28 Action: reset settings ("format ffs") Model: Autodetect 6205-6239 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6235:8A04:8A01]... CPU: MT6235 high speed boot On chip: 0000:0000:0003 status: FF rom: 4D573031 Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6235,E04 Date: 2000.00.00 Version: 1.0 Version: E930_MP_F1_PK_V34_11 Version: TINNO35_09A_HW ==================== New firmware found (v.3.28, database date: 20.03.2011): E930_MP_F1_PK_V34_11 This firmware is missing in support area. If this phone is good and working: - download latest software from support area and try again, probably this firmware already supported in latest software - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage - include in your e-mail full text from phone back label (phone name etc.) ==================== detecting structure #2... 1 2 5 7 8 9 11 13 21 22 25 27warning: wrong packet cs 28 29 31 33error: detection failed (16 tries), read flash and send to support connection Ok building list... done items to clear: 323 warning: wrong packet cs warning: wrong packet cs ==== c:\InfinityBox\ChineseMiracle\ChineseMiracle.exe [3/22/2011 12:29:15 PM] ==== Infinity-Box - About support forum: Infinity-Box - GSM-Forum Loading data, wait... [Infinity Box] Chinese Miracle v3.28 smart-card: connected S/N: 66F0:0116 Wait... Device: Autodetect 6205-6239 NOR Done Device: Autodetect 6253 NOR WARNING ! Settings will be cleared, user data erased, Imei set to default value ! Make flash backup before this procedure ! Do you want to continue ? ==== [3/22/2011 12:29:34 PM] ==== COM24 [VCP1] selected module v3.28 Action: reset settings ("format ffs") Model: Autodetect 6253 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! error: can't activate test mode error: operation failed ! Finished, time used: 17 sec Remove/Install battery now ! WARNING ! Settings will be cleared, user data erased, Imei set to default value ! Make flash backup before this procedure ! Do you want to continue ? ==== [3/22/2011 12:30:07 PM] ==== COM24 [VCP1] selected module v3.28 Action: reset settings ("format ffs") Model: Autodetect 6253 NOR Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6235:8A04:8A01]... CPU: MT6235 high speed boot On chip: 0000:0000:0003 status: FF rom: 4D573031 Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6235,E04 Date: 2000.00.00 Version: 1.0 Version: E930_MP_F1_PK_V34_11 Version: TINNO35_09A_HW ==================== New firmware found (v.3.28, database date: 20.03.2011): E930_MP_F1_PK_V34_11 This firmware is missing in support area. If this phone is good and working: - download latest software from support area and try again, probably this firmware already supported in latest software - make "Read full flash" operation - send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage - include in your e-mail full text from phone back label (phone name etc.) ==================== detecting structure #2... 1 2 5 7 8 9 11 13 21 22 25 27 28 29 31 33error: detection failed (16 tries), read flash and send to support connection Ok building list... done items to clear: 311 warning: wrong packet cs warning: wrong packet cs items cleared: 245 of 311 building list... done items remains: 1 Finished, time used: 5 min 32 sec Remove/Install battery now ! Last edited by InfinityHelp; 06-27-2020 at 10:08. Reason: legacy links removed |
03-25-2011, 08:04 | #2 (permalink) |
No Life Poster Join Date: Jul 2007 Location: Infinity-Box Support-
Posts: 9,321
Member: 541591 Status: Offline Sonork: 100.1611509 Thanks Meter: 7,361 | Hello! You need to select correct option according to chip for correct function between NOR and NAND selection.In some cases read codes option doesn't works due to new firmware version so in that case you can format the set for user code reset. Wr. |
03-25-2011, 08:24 | #4 (permalink) |
No Life Poster Join Date: Oct 2005 Location: P A K I S T A N Age: 16
Posts: 1,387
Member: 190344 Status: Offline Thanks Meter: 280 | I TRIED BU EXE 1.28 AND 1.27 AS WELL i tried witk 6253 nand i tried with 6253 nor i tried with 6205-6238 non of them could remove user code |
03-25-2011, 09:10 | #5 (permalink) | |
No Life Poster Join Date: Jul 2007 Location: Infinity-Box Support-
Posts: 9,321
Member: 541591 Status: Offline Sonork: 100.1611509 Thanks Meter: 7,361 | Quote:
You can also try complete format option to remove user code( but always take full backup). Wr. | |
03-25-2011, 10:32 | #7 (permalink) |
No Life Poster Join Date: Jul 2007 Location: Infinity-Box Support-
Posts: 9,321
Member: 541591 Status: Offline Sonork: 100.1611509 Thanks Meter: 7,361 | Read full flash and send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage Wr. |
09-25-2011, 10:46 | #10 (permalink) |
No Life Poster Join Date: Jul 2008 Location: pakistan hafizabad
Posts: 1,157
Member: 811013 Status: Offline Sonork: 03468717163 Thanks Meter: 744 | And one more thing always use latest module for best results. mmodule v4.1 |
The Following User Says Thank You to javedsf For This Useful Post: |
Bookmarks |
Thread Tools | |
Display Modes | |
| |
Similar Threads | ||||
thread | Thread Starter | Forum | Replies | Last Post |
E900 Unlock ????? | thcoms | NSPRO | 11 | 08-04-2006 13:39 |
[REQ] E900 Games/Apps/Tools Guide on Sending Games to phone.. | yo_da84 | Samsung Flashers, Software, Firmware. | 4 | 07-26-2006 14:46 |
e900 | econcern | UST Pro II | 2 | 06-18-2006 16:23 |
E900 unlock how? | trainmaniac | UST Pro II | 3 | 06-14-2006 20:12 |
samsung e900 | coolmax | NSPRO | 2 | 06-14-2006 13:15 |
|