read felash eroor............ - GSM-Forum

jamaletw · 12-31-2010, 17:20

COM3 [VCP0] selected
module v3.25
Device: Autodetect 6253 NOR
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6253:8A02:8A00
status: FF
bbchip bl ver: FE
NOR flash id[00C1]: 00EC:240400000000 [SAMSUNG] K5N2833ATB
chip size: 16Mb
otp status/size: S_DA_NOR_OTP_NOT_SUPPORT/00000000
NAND flash chip: not installed
internal RAM size: 00020000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (115200)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
detect sec ro...
detect custom parameters...
detect project-id...
detect NOR info...
number of areas/bytes to read: 1:00040000
reading (HW_STORAGE_NOR)...
error: can not read memory: 0FAA:S_FT_READBACK_FAIL
can not read memory, errorcode: 0FAA
it may be problem with current operation and/or future software functionality
contact to support !
error: last error: 0FAA:S_FT_READBACK_FAIL
Disconnect...
done
Finished, time used: 54 sec
Remove/Install battery now !

halp infinty...........

InfinityHelp · 01-06-2011, 19:48

hello!

is this full working phone or have some problems? which kind?

12-31-2010, 17:20	#1 (permalink)
jamaletw No Life Poster Join Date: Sep 2007 Location: india up. Posts: 1,385 Member: 599228 Status: Offline Thanks Meter: 112	read felash eroor............ COM3 [VCP0] selected module v3.25 Device: Autodetect 6253 NOR Checking data, wait... Action: read firmware NAND interface: BROM_DLL_v3.1016.00 Connect... Phone should be Switched OFF ! Press and HOLD Power button now ! Connecting... Booting... Release Power button now ! bootcode current/expected: 3.2/3.2 CPU: 6253:8A02:8A00 status: FF bbchip bl ver: FE NOR flash id[00C1]: 00EC:240400000000 [SAMSUNG] K5N2833ATB chip size: 16Mb otp status/size: S_DA_NOR_OTP_NOT_SUPPORT/00000000 NAND flash chip: not installed internal RAM size: 00020000 external RAM: S_DA_RAM_ERROR done Set baudrate (115200)... done ram test... testing... ram test passed ===> detect existing firmware structure... detect ffs... detect sec ro... detect custom parameters... detect project-id... detect NOR info... number of areas/bytes to read: 1:00040000 reading (HW_STORAGE_NOR)... error: can not read memory: 0FAA:S_FT_READBACK_FAIL can not read memory, errorcode: 0FAA it may be problem with current operation and/or future software functionality contact to support ! error: last error: 0FAA:S_FT_READBACK_FAIL Disconnect... done Finished, time used: 54 sec Remove/Install battery now ! halp infinty...........

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eeprom reading	KLImax	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	09-22-2011 15:55
read eeprom write eeprom, what do i need?	jonthe	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	12-08-2010 06:24
unable to reads phone type..	Rosshire	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	07-17-2000 15:55
Silly question!! Why is it impossible to read out the mastercode of Nokia phones????	MyKe	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	09-26-1999 14:31

01-06-2011, 19:48	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! is this full working phone or have some problems? which kind?