Is safe power ON the phone with 4,52V? - GSM-Forum

potasto · 09-14-2010, 22:19

Dear.

Today I make some changes into my infinity and pinfinder using the manual.

I remove the diode on the infinity and change for a wire. And I add 1000 mAh 25V capacitor to the entrance of power to the pinfinder.

I check the output and see current 4.52V to the phone. I don´t check this before make this changes.

Model of infinity: Intinity Box Plus. On board: future trading option gold prices at gsmfuture.com
Model of pinfinder: Infinity APF Box Plus! (blue colour).

Is output voltage ok?

InfinityHelp · 09-16-2010, 09:08

hello!

dont worry, voltage will drop under powered On phone.
i never heard about damaged this way phone.

cel_phon · 09-16-2010, 09:12

chinese phone normally take more voltage consumption than others brands
so it will not be fatal

cel_phon · 09-16-2010, 10:52

for your more satisfection

spiderman Output voltages are about 5 volt DC for pin finding

.........................

mswmkm · 09-16-2010, 20:59

Yes you can give 6 V for any phone from any source without any damage.

09-14-2010, 22:19	#1 (permalink)
potasto Major Poster Join Date: Apr 2010 Posts: 40 Member: 1281200 Status: Offline Thanks Meter: 2	Is safe power ON the phone with 4,52V? Dear. Today I make some changes into my infinity and pinfinder using the manual. I remove the diode on the infinity and change for a wire. And I add 1000 mAh 25V capacitor to the entrance of power to the pinfinder. I check the output and see current 4.52V to the phone. I don´t check this before make this changes. Model of infinity: Intinity Box Plus. On board: future trading option gold prices at gsmfuture.com Model of pinfinder: Infinity APF Box Plus! (blue colour). Is output voltage ok?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
6110 power does not stay on	sc~micro	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-30-2014 08:14
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-09-1999 17:04

09-16-2010, 09:08	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! dont worry, voltage will drop under powered On phone. i never heard about damaged this way phone.

09-16-2010, 09:12	#3 (permalink)
cel_phon No Life Poster Join Date: Jan 2009 Location: M_B_Din-PK Posts: 3,979 Member: 950201 Status: Offline Thanks Meter: 1,928	chinese phone normally take more voltage consumption than others brands so it will not be fatal

09-16-2010, 10:52	#4 (permalink)
cel_phon No Life Poster Join Date: Jan 2009 Location: M_B_Din-PK Posts: 3,979 Member: 950201 Status: Offline Thanks Meter: 1,928	for your more satisfection spiderman Output voltages are about 5 volt DC for pin finding .........................

09-16-2010, 20:59	#5 (permalink)
mswmkm Freak Poster Join Date: Jan 2009 Posts: 380 Member: 950629 Status: Offline Thanks Meter: 105	Yes you can give 6 V for any phone from any source without any damage.