team plyz help me and how to clear this err - GSM-Forum

yasermota · 12-02-2016, 10:31

Q mobile lt-600 not read flash

Quote:

hello team plyz chack this logs and plz help me
Operation : Read Flash [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 400 [MSM8x26]
ID_BLOCK_S : 0864F7A8
ID_BLOCK_I : 008050E1
ID_BLOCK_L : 5BF3348E7198DE5B
ID_BLOCK_L : C060A78CD9CBEF97
Use CM2 Internal Loader
Loader Sent! Initializing ...

Error : FH Configuration failed!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read Flash [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 400 [MSM8x26]
ID_BLOCK_S : 0864F7A8
ID_BLOCK_I : 008050E1
ID_BLOCK_L : 5BF3348E7198DE5B
ID_BLOCK_L : C060A78CD9CBEF97
Use CM2 Internal Loader
Loader Sent! Initializing ...

Error : FH Configuration failed!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read Flash [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 400 [MSM8x26]
ID_BLOCK_S : 0864F7A8
ID_BLOCK_I : 008050E1
ID_BLOCK_L : 5BF3348E7198DE5B
ID_BLOCK_L : C060A78CD9CBEF97
Use CM2 Internal Loader
Loader Sent! Initializing ...

Error : FH Configuration failed!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read Flash [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 400 [MSM8x26]
ID_BLOCK_S : 0864F7A8
ID_BLOCK_I : 008050E1
ID_BLOCK_L : 5BF3348E7198DE5B
ID_BLOCK_L : C060A78CD9CBEF97
Use CM2 Internal Loader

Error : Loader send failed!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Read Flash [ v1.04 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
BB_IDC_CPU : SnapDragon 400 [MSM8x26]
ID_BLOCK_S : 0864F7A8
ID_BLOCK_I : 008050E1
ID_BLOCK_L : 5BF3348E7198DE5B
ID_BLOCK_L : C060A78CD9CBEF97
Use CM2 Internal Loader
Loader Sent! Initializing ...

Error : FH Configuration failed!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Kirumira · 12-02-2016, 12:25

Try using Short cable,Connect direct to pc,BACK USB PORTS
Dont use usb Hubs
RESULTS?

12-02-2016, 12:25	#2 (permalink)
Kirumira No Life Poster Join Date: Dec 2004 Location: Uganda Age: 45 Posts: 2,922 Member: 96478 Status: Offline Sonork: 100.1674604 Thanks Meter: 1,420	Try using Short cable,Connect direct to pc,BACK USB PORTS Dont use usb Hubs RESULTS?