urgently need pin out for n95 - GSM-Forum

sartaj · 03-21-2008, 06:47

hello mates i need pin out for n95 given below.

InfinityHelp · 03-21-2008, 10:26

Hello!

looks like no test points on PCB
please update your post with connector type and GND pin position information

sartaj · 03-21-2008, 10:46

1: Gnd
2: Tx
12: Rx

when i use this pin out for formatting software shows getting cpu id failed.i use the different for mate methodes but same what should i do.

InfinityHelp · 03-21-2008, 10:53

hello!
might be wrong pinout
can you post full log of this error

sartaj · 03-21-2008, 11:55

hello infiity team this is the log .please tell me suggition.

InfinityHelp · 03-21-2008, 12:03

hello!

looks like wrong pinout you found

sartaj · 03-21-2008, 12:06

than tell me correct pin out.i tried all the pin outs in the pin out module.

InfinityHelp · 03-21-2008, 12:28

hello!

take multimeter and measure voltage on all phone pins.
post here pins voltages
we need to check pins with voltage 2,7-2,8 volts
all other with smaller or greater voltage is not data pins

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need pin outs for n95 (OPEL M650)	ikkks	Infinity-Box	3	02-22-2009 20:50
need pin outs for n95 (OPEL M650)	ikkks	Infinity-Box	0	02-17-2009 09:49
Masters... i need pin out for N95 8g RM-320	-=whitezaNder=-	Chinese Models & Cloned Phones	3	12-03-2008 04:08
Need pin out for N95 8gig	oraj	Infinity-Box	6	08-06-2008 11:22
need pin out for n95 2 sim phones	apmobileshyd	Infinity-Box	1	01-01-2008 16:35

03-21-2008, 10:26	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	Hello! looks like no test points on PCB please update your post with connector type and GND pin position information

03-21-2008, 10:46	#3 (permalink)
sartaj Freak Poster Join Date: Jun 2006 Posts: 354 Member: 300690 Status: Offline Thanks Meter: 12	1: Gnd 2: Tx 12: Rx when i use this pin out for formatting software shows getting cpu id failed.i use the different for mate methodes but same what should i do.

03-21-2008, 10:53	#4 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! might be wrong pinout can you post full log of this error

03-21-2008, 12:03	#6 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! looks like wrong pinout you found

03-21-2008, 12:06	#7 (permalink)
sartaj Freak Poster Join Date: Jun 2006 Posts: 354 Member: 300690 Status: Offline Thanks Meter: 12	than tell me correct pin out.i tried all the pin outs in the pin out module.

03-21-2008, 12:28	#8 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! take multimeter and measure voltage on all phone pins. post here pins voltages we need to check pins with voltage 2,7-2,8 volts all other with smaller or greater voltage is not data pins