where is CLK on 5500 (rm86) on rap??
 

plz show pic.
thx.

.

According to this, it should be pin17 (left > right)
http://forum.gsmhosting.com/vbb/show...59&postcount=8

But the UID testpoint pictures is wrong!
http://forum.gsmhosting.com/vbb/atta...0&d=1189810942
The pictures shows pin24, but the text says pin33, all other boxes use pin24 (AD1), do UID use AD0? what is correct?

Here bro,

Vga4 = CLK
Vga5 = Data

Dont forget to connect Vga 6 and Vga8

Regards,:)

VGA6? other phones only need VGA4(clk)+VGA5(ad0)+VGA8(gnd)
Have you tested those testpoints on the picture? that picture is from dejan, and shows CLK+AD1, UID-box never uses AD1 points, only points that are equal to dejan's AD0

@sub

1=vga 4 =clk

2=vga 5=ad1 =data

3=vga 8 =gnd

Thanks

Im not sure this is correct, VGA5 always goes to "Dejan's" AD0, and UID never uses AD1, I've been comparing testpoint pictures all morning :)
Im pretty sure that 5500 needs to be connected with AD0 to work with UID, maybe pin33 is AD0? pin24 is AD1!
UID-Team please clarify this :)

Check this 5200 testpoint from dejan and compare to UID testpoints, RAP is the same as 5500... pin24 is AD1, UID always uses AD0!

@Chiragp

Now I see you post this: http://forum.gsmhosting.com/vbb/show...7&postcount=33

Now VGA5/CLK is different than all others? is that correct? and have you tested 5500 unlock with CLK+AD1 instead of CLK+AD0???

@Chiragp

Your picture are WRONG!!!

I tried it without success, then I found a 5300 and found that RAP pin17 (from right>left) is always CLK, pin24 (left>right) is AD1 and pin27 (left>right) is AD0!
I'll post correct TP picture soon...

Here's what happened when I use pin 17 and 27:

Phone mode is: RF_INACTIVE
MCU sw: V 03.55 23-11-06 RM-86 (c) Nokia.
IMEI: 351855014561981

SIMLOCK INFO:
VERSION: SIMLOCK SERVER VERSION 63
CONFIG_DAT: 2420100000000000
PROFILE_BIT: 8000000000000000
COUNTER: 2
BLOCK 1: 1:LOCKED (MCC+MNC): 24201F, 2:LOCKED (GID1): FFFFF01FFFFFFFFF
BLOCK 2: 1:LOCKED (MCC+MNC): 24201F, 2:LOCKED (GID1): FFFFF02FFFFFFFFF
BLOCK 3: 1:LOCKED (MCC+MNC): 24201F, 2:LOCKED (GID1): FFFFF3FFFFFFFFFF
################################################## ######
Writing UNLOCK CODE (#pw+156454143968086+1#) to phone ...
Done.
################################################## ######


Phone mode is: RF_INACTIVE
MCU sw: V 03.55 23-11-06 RM-86 (c) Nokia.
IMEI: 351855014561981

SIMLOCK INFO:
VERSION: SIMLOCK SERVER VERSION 63
CONFIG_DAT: 2420100000000000
PROFILE_BIT: 8000000000000000
COUNTER: 0
BLOCK 1: 1:OPEN, 2:OPEN
BLOCK 2: 1:OPEN, 2:OPEN
BLOCK 3: 1:OPEN, 2:OPEN


Regards
Thomas
Unlocking.dk

Here is the correct 5500 TP! Tested by me.

P.S. Chiragp, Please don't post wrong and untested TP pictures again ;)

thnx thomas for your pic
my reg

@subten

thanks bro for ur help

Thanks bro :)

Regards,