BB5 After update can't unlock ?????? - Page 9 - GSM-Forum

Snapcost · 12-14-2007, 22:52

Quote:

Originally Posted by Paul Guañuna

I SHORTED WITH A WIRE??????
please where ,

Man I think everybody is going at this the wrong way. Messing up cables, cutting cables. opening boxes, selecting and turning software options that have nothing to do unlock......

People go back to basics, first need to start from a known good place. You need to put back the old software that was working. Before doing anything to you boxes or cable. It is like a PC thats go crazy after you something to it. You need to system restore for BB5BOX.

weru · 12-15-2007, 10:46

even the latest firmware!!!!!!!!!!!!!!!!!!!!!!!! could this be the end (evolution) of of baby5 box...............to bad boy 5

AssComm · 12-15-2007, 12:44

Had some problems with a 6300 ATD with v028

I've just installed V029 and updated the box to version 10, now unlocks it without a problem.

..::Thanh_gsm::.. · 12-15-2007, 19:31

with version 0.28 I unlock ok 1pcs N73, 1pcs 5300b, 3pcs 6300, except 6280 spansion. Hope that version 0.29 will do unlock 6280 ok. Thanks BB5 box team.

lxa786 · 12-16-2007, 03:16

same problem nokia 6280 can't unlock ETA chip and after we use UID BOX for unlocking and upgrade to 3.81

bogdanrex0 · 12-17-2007, 02:06

i think it must be a cable problemConnecting to BB5 Box ...
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-237
Version: V_04.91_03-04-07_RM-237_(c)_Nokia.
IMEI: 356975012283084
SP LOCK status:
Config Key: 2600200000000000
Block 1: CLOSED Type 5 Data: 26002F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Set Full Factory Defaults ...
Reset phone ...
Reset phone in TEST mode ...
Full Factory Defaults set OK
Skip autobackup of PM 308
Autobackup file:
RM-237_356975012283084_Locked_Keycnt_0_Fbuscnt_0__V_0 4.91_03-04-07_RM-237_(c)_Nokia..bin
already exist
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 2
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 3
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 4
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 5
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 6
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 7
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 8
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 9
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 10
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Unlock fail. Please try again.

in several times in this the errors repeated much frequently

shawgsm · 12-17-2007, 04:09

i just tried 6280 & unlock fails...maybe this is the end of bb5box...hope you check your box maybe bugs

br

zakariababu · 12-17-2007, 09:12

I try 5300 several time same problem unlock fail:
Connecting to BB5 Box ...
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-146
Version: V_05.00_27-04-07_RM-146_(c)_Nokia.
IMEI: 356408014136183
SP LOCK status:
Config Key: 2341000000000000
Block 1: CLOSED Type 5 Data: 23410F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Set Full Factory Defaults ...
Reset phone ...
Reset phone in TEST mode ...
Full Factory Defaults set OK
Create autobackup of PM 308
Reading PM Field 308 Subfield 1 with length 8192 bytes
Saving autobackup to file: RM-146_356408014136183_Locked_Keycnt_0_Fbuscnt_0__V_0 5.00_27-04-07_RM-146_(c)_Nokia..bin
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 2
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 3
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 4
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 5
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 6
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 7
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 8
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 9
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Try number: 10
Sending SP code: #pw+012345678901234+7#
Response byte: 08
Unlock fail. Please try again.
any idea?

melgsm · 12-17-2007, 15:51

another 6280 spansion chip with 1st toch
Autobackup file:
RM-78_353949017967580_Locked_Keycnt_0_Fbuscnt_0__V_05 .92_07-09-06_RM-78_(c)_Nokia.bin
already exist
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 00
Reading again SP Locks ...
SP LOCK status:
Config Key: 2081000000000000
Block 1: OPEN Type 5 Data: 20810F
Block 2: OPEN Type 5 Data: 64710F
Keyboard wrong codes counter: 0 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Phone unlocked succesfull

pepgra · 12-17-2007, 15:52

This problem is caused by the cable 2to1, with the cable Button, the unlock is satisfactory.

chandy pok · 12-17-2007, 16:34

Quote:

Originally Posted by Snapcost

Man I think everybody is going at this the wrong way. Messing up cables, cutting cables. opening boxes, selecting and turning software options that have nothing to do unlock......

People go back to basics, first need to start from a known good place. You need to put back the old software that was working. Before doing anything to you boxes or cable. It is like a PC thats go crazy after you something to it. You need to system restore for BB5BOX.

Hello Boy!!! U R realy short of experients.The box after updated of soft & firmware,How to restore to the old version??????????????

chandy pok · 12-17-2007, 16:52

Quote:

Originally Posted by ..::Thanh_gsm::..

with version 0.28 I unlock ok 1pcs N73, 1pcs 5300b, 3pcs 6300, except 6280 spansion. Hope that version 0.29 will do unlock 6280 ok. Thanks BB5 box team.

Hi Thanh GSM ! M chandy .I 've studied SINCE 1990 in Hanoi 1 year then Ho Chi minh city 4 years of Technical of tourism.Regarding BB5 Box after updated U must modify the click cable ( make it longer a bit) & take the headset cable to do it.Sure 1000% working.U can see in FORUM (POST HERE BB5 PHONE TESTED WITH OUR BOX.)GOOD LUCK!!!!!

Snapcost · 12-17-2007, 21:30

Quote:

Originally Posted by chandy pok

Hello Boy!!! U R realy short of experients.The box after updated of soft & firmware,How to restore to the old version??????????????

That is your and BB5box problem not my problem..my son.

telcentro · 12-18-2007, 11:16

Hello dear friends
I buy BB5BOX because I believe in BOX TEAM and my resseler BRAINDEAD but something is wrong with v29exe only...This is the LOG with NK6280...

------ Operation: UNLOCK Date: 15-12-2007 Time: 17:40:09 -------
Connecting to BB5 Box ...
Searching for phone ...
Phone found on FBUS interface
Reading phone info ...
Type: RM-78
Version: V_05.92_07-09-06_RM-78_(c)_Nokia
IMEI: 352265011572719
SP LOCK status:
Config Key: 2140300000000000
Block 1: CLOSED Type 5 Data: 21403F
Keyboard wrong codes counter: 3 wrong tries from max. 3 tries
Cable wrong codes counter: 0 wrong tries from max. 10 tries
Set Full Factory Defaults ...
Reset phone ...
Reset phone in TEST mode ...
Full Factory Defaults set OK
Skip autobackup of PM 308
Autobackup file:
RM-78_352265011572719_Locked_Keycnt_3_Fbuscnt_0__V_05 .92_07-09-06_RM-78_(c)_Nokia.bin
already exist
Checking if model/version is supported for unlock ...
Please connect testpoints
Testpoints connected OK
Keep Testpoints connected until unlock finish!
Unlocking phone ...
Try number: 1
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 2
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 3
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 4
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 5
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 6
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 7
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 8
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 9
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Try number: 10
Sending SP code: #pw+012345678901234+7#
Response byte: 55
Unlock fail. Please try again.
Best Regards
GSMTELCENTRO
[email protected]
www.gsmtelcentro.com

^PAX · 12-18-2007, 14:01

same problem here.6280 unlock fail.

12-18-2007, 11:16	#134 (permalink)
telcentro Junior Member Join Date: Jun 2007 Location: PORTUGAL Posts: 9 Member: 522908 Status: Offline Thanks Meter: 2	BB5BOX not unlock after update bb5_v29_exe_only Hello dear friends I buy BB5BOX because I believe in BOX TEAM and my resseler BRAINDEAD but something is wrong with v29exe only...This is the LOG with NK6280... ------ Operation: UNLOCK Date: 15-12-2007 Time: 17:40:09 ------- Connecting to BB5 Box ... Searching for phone ... Phone found on FBUS interface Reading phone info ... Type: RM-78 Version: V_05.92_07-09-06_RM-78_(c)_Nokia IMEI: 352265011572719 SP LOCK status: Config Key: 2140300000000000 Block 1: CLOSED Type 5 Data: 21403F Keyboard wrong codes counter: 3 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Set Full Factory Defaults ... Reset phone ... Reset phone in TEST mode ... Full Factory Defaults set OK Skip autobackup of PM 308 Autobackup file: RM-78_352265011572719_Locked_Keycnt_3_Fbuscnt_0__V_05 .92_07-09-06_RM-78_(c)_Nokia.bin already exist Checking if model/version is supported for unlock ... Please connect testpoints Testpoints connected OK Keep Testpoints connected until unlock finish! Unlocking phone ... Try number: 1 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 2 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 3 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 4 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 5 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 6 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 7 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 8 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 9 Sending SP code: #pw+012345678901234+7# Response byte: 55 Try number: 10 Sending SP code: #pw+012345678901234+7# Response byte: 55 Unlock fail. Please try again. Best Regards GSMTELCENTRO [email protected] www.gsmtelcentro.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Latest Update can't unlock N95 and N73, but problem solved now :)	Windziarz	Universalbox	3	12-09-2008 18:39
V810 clip update tool and after update 716 unlock help with this clip	Nasmi	Vodafone Star	1	09-17-2008 19:40
With new update can't unlock 2610 plasse fix this !!!!!!	wgmmmx	Universalbox	2	12-22-2007 17:46
only update can't unlock k200 k300	harisa	LG	2	05-07-2007 10:25
V3r Boot ver. 0A.52 new update can't unlock	JC_BY	Smart-Clip	3	12-06-2006 10:57

12-15-2007, 10:46	#122 (permalink)
weru Freak Poster Join Date: Feb 2004 Posts: 168 Member: 55124 Status: Offline Thanks Meter: 26	even the latest firmware!!!!!!!!!!!!!!!!!!!!!!!! could this be the end (evolution) of of baby5 box...............to bad boy 5

12-15-2007, 12:44	#123 (permalink)
AssComm Junior Member Join Date: Dec 2005 Posts: 36 Member: 206656 Status: Offline Thanks Meter: 1	Had some problems with a 6300 ATD with v028 I've just installed V029 and updated the box to version 10, now unlocks it without a problem.

12-15-2007, 19:31	#124 (permalink)
..::Thanh_gsm::.. No Life Poster Join Date: Dec 2005 Location: Ha Noi - Viet Nam Age: 18 Posts: 1,289 Member: 207400 Status: Offline Sonork: 100.1582556 Thanks Meter: 262	with version 0.28 I unlock ok 1pcs N73, 1pcs 5300b, 3pcs 6300, except 6280 spansion. Hope that version 0.29 will do unlock 6280 ok. Thanks BB5 box team.

12-16-2007, 03:16	#125 (permalink)
lxa786 Freak Poster Join Date: Jul 2005 Location: uk Age: 44 Posts: 397 Member: 163725 Status: Offline Thanks Meter: 137	same problem nokia 6280 can't unlock ETA chip and after we use UID BOX for unlocking and upgrade to 3.81

12-17-2007, 02:06	#126 (permalink)
bogdanrex0 Freak Poster Join Date: Jun 2006 Location: Subcarpathia Rzeszów City Age: 47 Posts: 263 Member: 289243 Status: Offline Thanks Meter: 20	i think it must be a cable problemConnecting to BB5 Box ... Searching for phone ... Phone found on FBUS interface Reading phone info ... Type: RM-237 Version: V_04.91_03-04-07_RM-237_(c)_Nokia. IMEI: 356975012283084 SP LOCK status: Config Key: 2600200000000000 Block 1: CLOSED Type 5 Data: 26002F Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Set Full Factory Defaults ... Reset phone ... Reset phone in TEST mode ... Full Factory Defaults set OK Skip autobackup of PM 308 Autobackup file: RM-237_356975012283084_Locked_Keycnt_0_Fbuscnt_0__V_0 4.91_03-04-07_RM-237_(c)_Nokia..bin already exist Checking if model/version is supported for unlock ... Please connect testpoints Testpoints connected OK Keep Testpoints connected until unlock finish! Unlocking phone ... Try number: 1 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 2 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 3 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 4 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 5 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 6 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 7 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 8 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 9 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 10 Sending SP code: #pw+012345678901234+7# Response byte: 08 Unlock fail. Please try again. in several times in this the errors repeated much frequently

12-17-2007, 04:09	#127 (permalink)
shawgsm No Life Poster Join Date: Jan 2004 Location: United States Posts: 1,988 Member: 51453 Status: Offline Thanks Meter: 729	i just tried 6280 & unlock fails...maybe this is the end of bb5box...hope you check your box maybe bugs br

12-17-2007, 09:12	#128 (permalink)
zakariababu Freak Poster Join Date: May 2004 Location: Bangladesh Age: 53 Posts: 460 Member: 67233 Status: Offline Thanks Meter: 20	I try 5300 several time same problem unlock fail: Connecting to BB5 Box ... Searching for phone ... Phone found on FBUS interface Reading phone info ... Type: RM-146 Version: V_05.00_27-04-07_RM-146_(c)_Nokia. IMEI: 356408014136183 SP LOCK status: Config Key: 2341000000000000 Block 1: CLOSED Type 5 Data: 23410F Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Set Full Factory Defaults ... Reset phone ... Reset phone in TEST mode ... Full Factory Defaults set OK Create autobackup of PM 308 Reading PM Field 308 Subfield 1 with length 8192 bytes Saving autobackup to file: RM-146_356408014136183_Locked_Keycnt_0_Fbuscnt_0__V_0 5.00_27-04-07_RM-146_(c)_Nokia..bin Checking if model/version is supported for unlock ... Please connect testpoints Testpoints connected OK Keep Testpoints connected until unlock finish! Unlocking phone ... Try number: 1 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 2 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 3 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 4 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 5 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 6 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 7 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 8 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 9 Sending SP code: #pw+012345678901234+7# Response byte: 08 Try number: 10 Sending SP code: #pw+012345678901234+7# Response byte: 08 Unlock fail. Please try again. any idea?

12-17-2007, 15:51	#129 (permalink)
melgsm No Life Poster Join Date: Nov 2007 Location: Egypt Age: 35 Posts: 1,866 Member: 629039 Status: Offline Sonork: 100.112945 Thanks Meter: 847	another 6280 spansion chip with 1st toch Autobackup file: RM-78_353949017967580_Locked_Keycnt_0_Fbuscnt_0__V_05 .92_07-09-06_RM-78_(c)_Nokia.bin already exist Checking if model/version is supported for unlock ... Please connect testpoints Testpoints connected OK Keep Testpoints connected until unlock finish! Unlocking phone ... Try number: 1 Sending SP code: #pw+012345678901234+7# Response byte: 00 Reading again SP Locks ... SP LOCK status: Config Key: 2081000000000000 Block 1: OPEN Type 5 Data: 20810F Block 2: OPEN Type 5 Data: 64710F Keyboard wrong codes counter: 0 wrong tries from max. 3 tries Cable wrong codes counter: 0 wrong tries from max. 10 tries Phone unlocked succesfull

12-17-2007, 15:52	#130 (permalink)
pepgra Freak Poster Join Date: May 2004 Age: 49 Posts: 445 Member: 65351 Status: Offline Thanks Meter: 16	This problem is caused by the cable 2to1, with the cable Button, the unlock is satisfactory.

12-18-2007, 14:01	#135 (permalink)
^PAX Freak Poster Join Date: Sep 2004 Location: Paris Age: 47 Posts: 205 Member: 82980 Status: Offline Thanks Meter: 23	same problem here.6280 unlock fail.