GSM-Forum - Find RX TX, Read Flash, Format FSS, with MCTOOL

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- MC-Tool (https://forum.gsmhosting.com/vbb/f433/)

- - Find RX TX, Read Flash, Format FSS, with MCTOOL (https://forum.gsmhosting.com/vbb/f433/find-rx-tx-read-flash-format-fss-mctool-481212/)

One Week Wait Please Now Language Editor Tester
Bestcol

And about Dual SIM phones with 2 CPU? They have 2 TX and 2 RX. Was tested to find TX, RX, TXb and RXb? Can we repair second IMEI in this phones with this tool?

b.r.

Cryspim

Good Work Very Ease For Use.. Thanks For ThÝs Work

good very good its wonderfull

any one have drivers and exe support page dont have..

how find 2. cpu pinouts rxb txb ? this box support it ?

Test today A8+

Read Pin out with MCTOOL 1.03 more stabil..
[ 17:28:27 ] [--- Operation Started ---]
[ 17:28:27 ] Detecting power pins...
[ 17:28:30 ] Detected GND : 2,14
[ 17:28:31 ] Searching for pinout...
[ 17:28:44 ] Pinout detected OK!
[ 17:28:44 ] RX : 7 TX : 9
[ 17:28:44 ] Writing settings to Box...
[ 17:28:47 ] Settings has been written OK!
[ 17:28:47 ] [--- Operation Successful! ---]

Read Flash
[ 17:29:02 ] [--- Operation Started ---]
[ 17:29:03 ] Press and keep power ON button...
[ 17:29:05 ] Phone detected : MTK CPU
[ 17:29:05 ] Preparing phone for boot...
[ 17:29:08 ] Release power ON button now!
[ 17:29:08 ] CPU Platform : 8A02-6226
[ 17:29:08 ] Loading bootloader...
[ 17:29:12 ] Bootloader loaded OK!
[ 17:29:12 ] Getting flash chip details...
[ 17:29:14 ] Flash chip ID : 0001227E [22202200]
[ 17:29:14 ] Chip Name : AMD AM49PDL127-S71PL127J
[ 17:29:14 ] Flash chip size : [ 0x01000000 - 16MB ]
[ 17:29:14 ] Chip block (0x00) : 1000 * 1000
[ 17:29:14 ] Setting parameters...
[ 17:29:15 ] Initializing phone`s RAM...
[ 17:29:16 ] RAM initialize OK!
[ 17:29:16 ] Reading flash memory...
[ 17:32:34 ] SW Ver : MIKI26_06B_PCB01_GPRS_MT6226_S01.MAUI_06B_ANX_G1_0 5
[ 17:32:44 ] Flash memory read OK!
[ 17:32:44 ] [--- Operation Successful! ---]

format file sistem
[ 17:38:38 ] [--- Operation Started ---]
[ 17:38:38 ] Press and keep power ON button...
[ 17:38:40 ] Phone detected : MTK CPU
[ 17:38:40 ] Preparing phone for boot...
[ 17:38:43 ] Release power ON button now!
[ 17:38:43 ] CPU Platform : 8A02-6226
[ 17:38:44 ] Loading bootloader...
[ 17:38:47 ] Bootloader loaded OK!
[ 17:38:47 ] Getting flash chip details...
[ 17:38:49 ] Flash chip ID : 0001227E [22202200]
[ 17:38:49 ] Chip Name : AMD AM49PDL127-S71PL127J
[ 17:38:49 ] Flash chip size : [ 0x01000000 - 16MB ]
[ 17:38:49 ] Chip block (0x00) : 1000 * 1000
[ 17:38:49 ] Setting parameters...
[ 17:38:49 ] Fromatting FFS, please wait...
[ 17:39:01 ] FFS Format OK!
[ 17:39:01 ] [--- Operation Successful! ---]

br

bnc

Quote:

Originally Posted by Cryspim (Post 2979280)

And about Dual SIM phones with 2 CPU? They have 2 TX and 2 RX. Was tested to find TX, RX, TXb and RXb? Can we repair second IMEI in this phones with this tool?

b.r.

Cryspim

yeah it is right. can we repair second imei ? becase i need it. thanks

working fine good tool for vahidbhaiworking working fine good tool for vahidbhaifine good tool for vahidbhai

@bestncheap
Does it nesessary to remove resistor in the box? and if i have a warrant on box do i violate it?

Quote:

Originally Posted by mkwatis (Post 3032499)

@bestncheap
Does it nesessary to remove resistor in the box? and if i have a warrant on box do i violate it?

some box allready modified...
so not all box must remove the resistor..

BR

BnC

hi to all,

i purchasse a new mctool, install it right.
1-how to know wich cpu type select?
2-how repair 2nd sim of my n95 dual sim?
3-if there is "not released yet", why you propose it to salle?

we are too far from infinity team, please give us answers.

thanks.

Quote:

Originally Posted by bestncheap (Post 2961960)

Try Today Nokia N73CHINA Restart when insert sim card

1. Read Pinout
[ 15:00:11 ] [--- Operation Started ---]
[ 15:00:11 ] Detecting power pins...
[ 15:00:14 ] Detected GND : 1,4
[ 15:00:15 ] Searching for pinout...
[ 15:00:26 ] Pinout detected OK!
[ 15:00:26 ] RX : 11 TX : 12
[ 15:00:26 ] Writing settings to Box...
[ 15:00:29 ] Settings has been written OK!
[ 15:00:29 ] [--- Operation Successful! ---]

2. Better make backup before do any operation, this backup operation
[ 15:07:54 ] [--- Operation Started ---]
[ 15:07:55 ] Press and keep power ON button...
[ 15:07:56 ] Phone detected : MTK CPU
[ 15:07:56 ] Preparing phone for boot...
[ 15:07:59 ] Release power ON button now!
[ 15:07:59 ] CPU Platform : 8A02-6226
[ 15:08:00 ] Loading bootloader...
[ 15:08:03 ] Bootloader loaded OK!
[ 15:08:03 ] Getting flash chip details...
[ 15:08:05 ] Flash chip ID : 00EC257E [25082501]
[ 15:08:05 ] Chip Name : SAMSUNG K5L2931CAM
[ 15:08:05 ] Flash chip size : [ 0x01000000 - 16MB ]
[ 15:08:05 ] Chip block (0x00) : 8 * 2000
[ 15:08:05 ] Chip block (0x01) : FE * 10000
[ 15:08:05 ] Chip block (0x02) : 8 * 2000
[ 15:08:05 ] Setting parameters...
[ 15:08:06 ] Initializing phone`s RAM...
[ 15:08:08 ] RAM initialize OK!
[ 15:08:08 ] Reading flash memory...
[ 15:11:33 ] Flash memory read OK!
[ 15:11:33 ] [--- Operation Successful! ---]

3. Format FFS for solving restart problem..
[ 15:12:08 ] [--- Operation Started ---]
[ 15:12:09 ] Press and keep power ON button...
[ 15:12:11 ] Phone detected : MTK CPU
[ 15:12:11 ] Preparing phone for boot...
[ 15:12:14 ] Release power ON button now!
[ 15:12:14 ] CPU Platform : 8A02-6226
[ 15:12:14 ] Loading bootloader...
[ 15:12:18 ] Bootloader loaded OK!
[ 15:12:18 ] Getting flash chip details...
[ 15:12:20 ] Flash chip ID : 00000000 [EC257E25]
[ 15:12:20 ] Chip Name : SAMSUNG K5L2931CAM
[ 15:12:20 ] Flash chip size : [ 0x01000000 - 16MB ]
[ 15:12:20 ] Chip block (0x00) : 8 * 2000
[ 15:12:20 ] Chip block (0x01) : FE * 10000
[ 15:12:20 ] Chip block (0x02) : 8 * 2000
[ 15:12:20 ] Setting parameters...
[ 15:12:20 ] Fromatting FFS, please wait...
[ 15:12:33 ] FFS Format OK!
[ 15:12:33 ] [--- Operation Successful! ---]

br

bnc

sir pls help

how to connect n-73 with box when cable is not ablable plz send screen short

nice job keep it up..............

verry happy with my new mc tool box .