06-06-2008 New Spreadtrum tool v.1.0 released FULL Service tool! New Chinese cocktail

[GSMtricks]

06-06-2008
New updates again!

New Spreadtrum tool v.1.0 released - now you can Read flash info, Update firmware, Read/write EEPROM, Format file system, Empty board flashing, Backup/restore Calibration Data and much more!

New Chinese cocktail tool v.8.9 released - 12 new models added: 8600d, ipmart watch phone, N95 8GB, N98s, N972, Rafik 828, T689, TCL 238, TV 2008, v888, X710, ZT 8099. Also were added new firmwares for 6300, Nokia M77, N82, N95, Nokia N91. Also new flash mcu support was added. New flash files and cable schematics also added to support area.

Please go to Support files and download new software Tools, flash files.

Don't forget to update signature files!

Spreadtrum tool - get the exclusive opportunities!

Supported phone models list:

SC 6600D MCU-based
SC 6600E MCU-based
CECT: 3838, Q380
SED: AK606

Software description:

- Support SC 6600D MCU-based, SC 6600E MCU-based
- Added "twin flash" option
- Phone structure autodetection
- Memory size autodetection
- Firmware version autodetection
- Possibility to connect the phone on different speed ( 460800, 115200 )
- Full flash backup/restore from backup option
- File system formatting option
- Reset to default values option
- Possibility to read/write eeprom
- Empty board flashing possibility
- Pinout autodetect for "dead" phones
- Dead phones repairing
- Theft protection Lock
- Automatic recalculation of security zone
- Auto Calibration backup
- Supports Initialization the phone after the process
- Keeps Calibration data ( frequency settings, battery settings, LCD, sound )
- Supports IMEI repair/change
- Restores Calibration Data
- Connect/read MCU Firmware, System EEPROM, User Data, Product Data

Full manual how to use this soft you can read there: http://www.multi-box.net

New files added to support area:

6300:
6300_T6226_05C_PCB01_GPRS_MT6226_S01.A7_NOKIA_ALLL ANG_V0627A.sfw

8600d ( new model ):
8600d_TEMP26_05C_CARD_PCB01_GPRS_MT6226_S01.MAUI_0 5C_W06_16_F2.sfw

ipmart watch phone ( new model ):
ipmart_watch_phone_GD25_06B_PCB01_GPRS_MT6225_S00. M1000_U2_AR8_V3_0ATEST.sfw

Nokia M77:
n77__M700_PCBV1_1_GPRS_MT6226_S01.M700_ECAFVR_129J B0_HX8346_BT_V03.sfw

N82:
N82_JIEKE25_07A_PCB01_GPRS_MT6225_S00.MAUI_07A_W07 _32_MP_V7.sfw

N95:
N95_M220_PCB01_GPRS_MT6226_S01.N95.sfw

N95 8GB ( new model ):
N95_8G_JIA8GB_PCB01_GPRS_MT6226_S01.N95_8GB_V01.sf w

N98s ( new model ):
N98s_CKT26_06B_PCB01_GPRS_MT6226_S01.SWAN+_6226_YT CQYR_L7EN_229_071130_LD0_0V0_SA75_CTF_BT.sfw

N972 ( new model ):
N972_MAIN_MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01.M AUI_05C_W06_16.sfw
N972_SUB__DAYO_NEP_06B_PMJ_PCB01_GSM_MT6205B_DN.MA UI_06B_W07_20_MP_V7.sfw

Nokia N91:
M91_MTK26_06B_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_1 2_F1.sfw

Rafik 828 ( new model ):
RAFIK_828_MTK26_05C_DS501_PCB01_GPRS_MT6226_S01.MA UI_05C_W06_16.sfw

T689 ( new model ):
T689_E550_A5ARAB_E550_GPRS_MT6226_S01.01_2.sfw

TCL 238 ( new model ):
TCL288_M220_PCB01_GPRS_MT6226_S01.sfw

TV 2008 ( new model ):
tv2008_MAIN_MTK26_05C_MASTER_PCB01_GPRS_MT6226_S01 .MAUI_05C_W06_16.sfw
tv2008_SUB_DAYO_NEP_06B_PMJ_PCB01_GSM_MT6205B_DN.M AUI_06B_W07_20_MP_V7.sfw

Unknown:
MTK25_06B_PCB01_GPRS_MT6225_S00.MAUI_06B_W07_12_10 .sfw
SZMI26_05C_SET_PCB01_GPRS_MT6226_S01.V2_0628_0_0_1 .sfw

v888 ( new model ):
v888_E728_PCB01_GPRS_MT6226_S01.M22M019B0606_5_3_1 _0D0629C01.sfw

X710 ( new model ):
X710_TIANYU25_06B_PCB01_GPRS_MT6225_S00.092322_77C _V0208.sfw

ZT 8099 ( new model ):
ZT8099_SUB_M270A_PCB01_GSM_MT6205B_DN.LA20001_1_1_ 1_1T04M1020_M411A_S.sfw
ZT8099_MAIN_A201_PCB01_GPRS_MT6226_S01.sfw

Manual for working with Spreadtrum Tool

1. Connect the phone and find the pinout using PadFinder for example ( see the manual on HOW TO FIND PINOUTS ) If you don't have PadFinder you must make a correct cable first yourself or... is a time maybe to buy PadFinder??

ATTENTION!
* The phone has to be powered on and work in its usual manner.
* For finding pinout DONT PRESS "Power On" button
* Pinout detection allows you to find the pinout for working even with "dead" phones, though the whole procedure may take up to 2-3 min.



2. It is strongly recommended to select the appropriate model from the models list! If you havent found the suitable one there, than choose "Autoselect".

3. Press "Read Phone Info" button and read the handset information.



4. Select the appropriate flashfile from our support area and press "Connect/Read Flash Info"



5. Update firmware:
a) if the phone is "dead", enable "MCU Firmware", "System EEPROM", "User Data", "Product Data" buttons under "Connect/read Flash Info" button;
b) if the phone is functioning well, than enable just "MCU Firmware" button.



6. Power on the phone after the process.

7. If you enter the "Backup/restore" bookmark, youll be able to Backup All Flash/Restore From Backup.
ATTENTION! Dont forget to power on the phone after the process!



8. EEPROM backup/restore allows you to backup/restore the handsets values
ATTENTION! Dont forget to power on the phone after the process!

9. There is a possibility to Restore Calibration Data even after the phone was flashed with full backup from other phone. In this case youll have an opportunity to retore its native Calibration Data and old IMEI.

10. You can set new IMEI in couple of clicks.



11. With "Backup/Restore User Data" buttons you will be able to backup/restore Phone settings, Phonebook etc.
ATTENTION! It is recommended to keep the handset active during the process.

12. "Reconnect Power" button reconnects the power supply.

13. "Theftprot Lock" - allows you to find your stolen phone. If you set the code to the phone, than as soon as the phone is powered on, youll get the SMS with the info about its location.

_________________
GSMtricks - Multi-box TEAM

[kalpeshoza]

more power thanks for hard work sir !!!

[nzeiga]

Good Job Keep it Up
Please can we use usb cable like Spiderman to repair Spreadtrum phone
Thanks

[turkcellgsm]

thanks good work multi team good com setting

other chinase phones Chinese_cocktail_MTKCST_Tool usb and com setting ???

[GSMtricks]

Originally Posted by turkcellgsm

thanks good work multi team good com setting

other chinase phones Chinese_cocktail_MTKCST_Tool usb and com setting ???

USEb com settings what do you mean? Plug cable to box and enjoy you don't need any settings

[hanen]

rally great team and great box

[zahid_gsm]

its very nice You can set new IMEI in couple of clicks.


thanx

[GSMtricks]

Originally Posted by zahid_gsm

its very nice You can set new IMEI in couple of clicks.


thanx

yes very easy and fast

[hanen]

Originally Posted by GSMtricks

USEb com settings what do you mean? Plug cable to box and enjoy you don't need any settings

do u mean we can use RJ45 OR USB CAPLE

[GSMtricks]

Originally Posted by hanen

do u mean we can use RJ45 OR USB CAPLE

In Multi-box there no any USB sockets man. Where you want to plug USB cable? Sure you must use RG45 cable and must prug it into "special" socket

[Sudan-Mobiles]

Originally Posted by GSMtricks

In Multi-box there no any USB sockets man. Where you want to plug USB cable? Sure you must use RG45 cable and must prug it into "special" socket

why when open soft the plinking socket is UNI not special as chinese cocktail

[GSMtricks]

Originally Posted by habeebo

why when open soft the plinking socket is UNI not special as chinese cocktail

And what is the problem? Soft working? Than use it

[Sudan-Mobiles]

not work for me .... my problem how to conect phone with box. i detrmind tx and rx in cect f200 as 12 ,13 but when i use special socket no success to conect....

[GSMtricks]

Originally Posted by habeebo

not work for me .... my problem how to conect phone with box. i detrmind tx and rx in cect f200 as 12 ,13 but when i use special socket no success to conect....

That mean you make wrong cable

[Sudan-Mobiles]

1 more gustion can i use the special socket when (no blinking light on it )