Doses Chines Cocktail support SPREADTRUM CPU Type?

[KUBAT1]

Dear Supporters,
we are planing to buy a box which can fully support Chinese models with SPREADTRUM CPU Type.. here is not very clear that Chinese Cocktail box support this CPU type, could you please inform us, does it support features are listed below for SPREADTRUM CPU type?:

-FFS FORMATING
-IMEI REPARING/CHANGING
-FLASH READ/WRITE
-LANGUAGE PACK EDITING 8EDING REMOVING LANGUAGES)
-FIRMWARE FONT EDITING

Regards..

[Ja\/\/aD]

Spreadtrum tool - get the exclusive opportunities!


Supported phone models list:

SC 6600D MCU-based
SC 6600E MCU-based
CECT: 3838, Q380
SED: AK606

Software description:

- Support SC 6600D MCU-based, SC 6600E MCU-based
- Added "twin flash" option
- Phone structure autodetection
- Memory size autodetection
- Firmware version autodetection
- Possibility to connect the phone on different speed ( 460800, 115200 )
- Full flash backup/restore from backup option
- File system formatting option
- Reset to default values option
- Possibility to read/write eeprom
- Empty board flashing possibility
- Pinout autodetect for "dead" phones
- Dead phones repairing
- Theft protection Lock
- Automatic recalculation of security zone
- Auto Calibration backup
- Supports Initialization the phone after the process
- Keeps Calibration data ( frequency settings, battery settings, LCD, sound )
- Supports IMEI repair/change
- Restores Calibration Data
- Connect/read MCU Firmware, System EEPROM, User Data, Product Data


Manual for working with Spreadtrum Tool

1. Connect the phone and find the pinout using PadFinder ( see the manual on HOW TO FIND PINOUTS )
ATTENTION!
* The phone has to be powered on and work in its usual manner.
* For finding pinout DON'T PRESS "Power On" button
* Pinout detection allows you to find the pinout for working even with "dead" phones, though the whole procedure may take up
to 2-3 min.



2. It is strongly recommended to select the appropriate model from the models list! If you haven't found the suitable one there, than choose "Autoselect".

3. Press "Read Phone Info" button and read the handset information.



4. Select the appropriate flashfile from our support area and press "Connect/Read Flash Info"



5. Update firmware:
a) if the phone is "dead", enable "MCU Firmware", "System EEPROM", "User Data", "Product Data" buttons under "Connect/read Flash Info" button;
b) if the phone is functioning well, than enable just "MCU Firmware" button.



6. Power on the phone after the process.

7. If you enter the "Backup/restore" bookmark, you'll be able to Backup All Flash/Restore From Backup.
ATTENTION! Don't forget to power on the phone after the process!



8. EEPROM backup/restore allows you to backup/restore the handsets values
ATTENTION! Don't forget to power on the phone after the process!

9. There is a possibility to Restore Calibration Data even after the phone was flashed with full backup from other phone. In this case you'll have an opportunity to retore its native Calibration Data and old IMEI.

10. You can set new IMEI in couple of clicks.



11. With "Backup/Restore User Data" buttons you will be able to backup/restore Phone settings, Phonebook etc.
ATTENTION! It is recommended to keep the handset active during the process.

12. "Reconnect Power" button reconnects the power supply.

13. "Theftprot Lock" - allows you to find your stolen phone. If you set the code to the phone, than as soon as the phone is powered on, you'll get the SMS with the info about its location.

The soft will be available for download from the support area tomorrow!

Here is one more time for you specialy. We support all what is descrived there. So what is your problem? If you dont know how to use soft no need a scream there - just check support area first.

[KUBAT1]

thank u very much for usefull informations..