|
Welcome to the GSM-Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. Only registered members may post questions, contact other members or search our database of over 8 million posts. Registration is fast, simple and absolutely free so please - Click to REGISTER! If you have any problems with the registration process or your account login, please contact contact us . |
|
Register | FAQ | Donate | Forum Rules | Root any Device | ★iPhone Unlock★ | ★ Direct Codes ★ | Direct Unlock Source |
| LinkBack | Thread Tools | Display Modes |
04-30-2008, 16:23 | #1 (permalink) |
Junior Member Join Date: Nov 2005
Posts: 21
Member: 198003 Status: Offline Thanks Meter: 0 | N70 unlock |
04-30-2008, 16:24 | #2 (permalink) | |
No Life Poster Join Date: Jun 2005 Location: Lost in this Field Age: 39
Posts: 634
Member: 154513 Status: Offline Thanks Meter: 160 | Quote:
No need for version you have to click unlock in Ub for N70 to unlock your set | |
05-17-2008, 21:20 | #7 (permalink) |
Freak Poster Join Date: May 2008
Posts: 353
Member: 764029 Status: Offline Thanks Meter: 84 | JUST READ 1. Copy and paste bb5_unlocker folder to C:/ drive 2. Open bb5_unlocker folder and run install.bat 3. After install finished, message will appear "bb5 box not found", press ok 4. Connect box to usb port on computer 5. Windows will ask for driver, browse to folder "bb5_unlocker" -> "winxp dejan", and let windows install drivers 6. Go to Device Manager 7. Go to Ports (COM & LPT) 8. right-click on dejan bb5 box and go to properties 9. change com port to lowest possible (port 2) 10. click on scan for hardware changes 11. click ok 12. open bb5unlocker sw 13. connect cable to box 14. open phone 15. connect positive (red connector) to 1st pin (left) of batt connector 16. connect bsi (yellow connector) to 2nd pin (middle) of batt connector --> NOT need for 6280 17. connect GND (black crocodile clip) to vibrator. for 6131 need to connect to pop port connector of phone 18. connect cable to phone connector 19. power up phone 20. click on read info on sw 21. phone info will appear with lock status 22. if try 1 = 2,3,4,10 or any number, this has no affect (this is wrong unlock by code) 23. if try 2 = 10, then phone CANNOT be unlocked (this is wrong unlock by fbus). if counter is 0, then after unlocking or wrong unlock a backup is autmatically stored in backup folder in bb5_unlocker folder. everytime after a wrong unlock (usually by touching other pins on rap ic, and therefore causing the phone to switch off, then sw cant read and error will appear on screen) then counter will increase, if goes up to 4 or 6 then you must press "write backup" to reset counter. 24. CLK = CLOCK = small tp 25. AD1 = DATA = big tp with unlock ignition switch 26. connect tp's on top of pins shown on tp photo, lightly pushing down the spring loaded pins of tp connectors down on tp pins, only slightly, just touching, otherwise rap3g ic will damage 27. just click ignition button on DATA tp, keeping tp connectors connected to pins 28. phone will unlock within 3-5 secs and will show unlock successful message 29. if message appears: cannot unlock phone! - this means tp pins you connected are incorrect or lost connection, then take out rj45 cable out from box and put back, then switch on phone again and repeat procedure. |
Bookmarks |
| |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
N70 unlock @ zulea unlocker | marichu_patz | Nokia Base Band 5 ( BB-5 ) | 1 | 03-29-2009 09:09 |
USF3 N70 unlocking? | pagerdude | UFS2 + UFS3-Tornadoflasher | 5 | 12-25-2005 15:41 |
|