i cant unlock any bb5 hi to all, a 3 moths ago i unlock any bb5 without problem , now i update firmware pkey and software and now i cant unlock any bb5 , even 5200 with very easy TP, what is the problem ??? i check my 3 cables and are all right. and i have already kill one N73 by tring 100 times to unlock it . i want a ansker please!!!! :mad: |
hi That also happen to me, and i try this: change Connectivity Cable Driver to a lower version 6.83.... update th Pkey and change the TP cable to 2 nedlles and 2 cables used in PS2 chip. Problem solved. Sometimes is necessary to flash again phone to a latest soft even when it as. It solves any problem even in N80. Hope it helps. :):):) |
Ok , i will try and post here the results. Thanks Quote:
|
i search for nokia cable drivers 6.83 but i cant find , i already install pc suite 683 but he dont install the cable drivers??? where i can get this drivers??? |
Quote:
I use jaf 1.98.57 and i update pkey, i flash the phone to version 5.00, and nothing.....:( jaf log: Backup simlock data first... Setting local mode... Reading IMEI... C:\Programas\ODEON\JAF\ProgData\RM-174_356407018379104_05.00_LCK_backup.pm Done! Detecting phone... Reading simlock... LOCK STATUS: CONFIG KEY: 8000000000000000 PROVIDER KEY: 2680300000000000 Provider: Optimus;Portugal Key Code count: 0, FBUS Code count: 0 Block 1: Lock 1: CLOSED -> Lock Data: 26803F Reading phone...Type: RM-174, Ver: 05.00 Reading imei... Imei: 356407018379104 Reading HW ID...2501 Found general data... Waiting for TP confirmation...................................... ........Sending code... Sending code... Sending code... Sending code... Sending code... Sending code... Sending code... Sending code... Sending code... Sending code... Sending code... Sending code... Sending code... TP Failed... try again. |
Quote:
ok , after this i try 5 more times and unlock the phone. i put first the data (ad8) and next the clk needle and he unlock. i will try with on N95 and check if jaf is working 100% ok. Thanks for the tips, i hope this help someone with the same problem. |
after that 5200,...... today i try unlock one n73, and here i am , back to 0 . always unlock failed, try again.......... :( |
try to use the new TP from Sagmaster then post result. |
or use in CLk TP a little needle so tiny that canīt touch PCB only the TP. |
ok, i already try the easy TP http://forum.gsmhosting.com/vbb/show...ight=sagmaster and no results. And i am using the smallest needles like nurses use to suck the blood |
always same result LOCK STATUS: CONFIG KEY: 0000000000000000 PROVIDER KEY: 2680100000000000 Provider: Vodafone / Yorn;Portugal Key Code count: 0, FBUS Code count: 0 Block 1: Lock 1: CLOSED -> Lock Data: 26801F Block 2: Lock 1: CLOSED -> Lock Data: 26801F Reading phone...Type: RM-133, Ver: 05wk47v51.4 Reading imei... Imei: 359568015421293 Reading HW ID...7100 Found general data... Waiting for TP confirmation...............................Sending code... Sending code... Sending code... Sending code... Sending code... Sending code... Sending code... Sending code... Sending code... Sending code... Sending code... Sending code... Sending code... TP Failed... try again |
TP Cable modified by me 1 Attachment(s) ok , here is me again , after try many times and past hours trying unlock one N73 i solve to do some hardware tests and changings, and i found some curios values.... and i made one TP cable modified :) Till now i only unlock this n73 but i will try do more bb5 and post here my results with this cable. I unlock N73 on first try with this : -Windows XP -Jaf software 1.98.57 -(i dont think its necessery but i install network frame v1.1) -Nokia connectivity cable drivers v.6.83.9.0 - And the cable modified by me (see the picture) Instructions: Connect all the wires to ur phone (Vph,Gnd,BSi,phone connector, and press unlock power the phone and wait for "waiting testpoint......" , this part its very important connect first the "CLK" needle and after that connect the "data" needle. And .........UNLOCK OK ;) If anybody will try doing this please post here ur results Jaf log: Quote:
|
thatīs da needle that i use. look at the wires try to use the tinner as possible. |
1 Attachment(s) About that picture i attached on the up post had some incorrect draw resistor :rolleyes:. See here the new Schematic Corrected ;) Quote:
|
Quote:
hi friend now available pc suit v 7.0.8.2 pl update this latest version try and post result thanks :) |
All times are GMT +1. The time now is 06:32. |
vBulletin Optimisation provided by
vB Optimise (Pro) -
vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -