TRY AND TESTED Dct4+ DIRECTUNLOCK - GSM-Forum

JaY'Treze · 05-14-2008, 02:09

TRY AND TESTED Dct4+ DIRECT UNLOCK

Code:

MCU Sw  :  V 05.22 31-01-08 RM-340 (c) Nokia
IMEI    :  353122021805879 
SLConf : 5150300000000000
SLProf : 800000000001000B
SLVar  : 00553531220218058700
SLAux  : 000B5555

Start unlocking operation....
Check : unlock file...
RM340v522_part1.bin
  >> unlock file found..
Booting ...
UPP: 3162
Boot File : C:\ADVANCE BOX\2.15\Flash\u3_2nd.fia
Supported Hardware ID :  [3040,2292,3162,]
Sending Bootloader ...
FlashID: 00EC2208
ExtBUSC: 7EAD 1AB6 BE1B E20B 587D E46B EEDB 1465 
Algo File : C:\ADVANCE BOX\2.15\Flash\u3_amd.fia
Supported Hardware ID :  3040,2292,3162,
Sending Algorithm...
MSID: 84373C1CDDC747AD581480C683
DecodedMSID: 2C40BAE90005CF0DA8000000
EncodedFAID: 36FFCB44B4B108C54B9ACC5D
FAID OK..
Erase Flash Area:
   >> : 01000000-0101FFFF
   >> : 01080000-0109FFFF
Erase Flash Done!
Writing flash data.. please wait...
..........>
Write flash done!
Permanent data restore...
Permanent data restore done!...
Please wait....
Sending Unlock Command....
  >>Verifying AdvanceBox availability..
  >>Box verified OK...
  >>Please wait while calculating splock data..
  >>Unlock command sent!
Check : original file...
RM340v522_part2.bin
  >> orignal  file found..
Booting ...
UPP: 3162
Boot File : C:\ADVANCE BOX\2.15\Flash\u3_2nd.fia
Supported Hardware ID :  [3040,2292,3162,]
Sending Bootloader ...
FlashID: 00EC2208
ExtBUSC: 7EAD 1AB6 BE1B E20B 587D E46B EEDB 1465 
Algo File : C:\ADVANCE BOX\2.15\Flash\u3_amd.fia
Supported Hardware ID :  3040,2292,3162,
Sending Algorithm...
MSID: 84373C1CDDC747AD581480C683
DecodedMSID: 2C40BAE90005CF0DA8000000
EncodedFAID: 36FFCB44B4B108C54B9ACC5D
FAID OK..
Erase Flash Area:
   >> : 01000000-0101FFFF
   >> : 01080000-0109FFFF
Erase Flash Done!
Writing flash data.. please wait...
...........>
Write flash done!
Permanent data restore...
Permanent data restore done!...
Reading phone status...
MCU Sw  :  V 05.22 31-01-08 RM-340 (c) Nokia
IMEI    :  353122021805879 
SLConf : 0010100000000000
SLProf : 000000000001000B
SLVar  : 00553531220218058700
SLAux  : 000B5555
Process Done!..

dino3711 · 05-14-2008, 02:47

can you plz upload the software......plz....

sam3578 · 05-14-2008, 02:57

try to check this link sir....

CLICK ME

Euan · 05-14-2008, 02:57

Quote:

Originally Posted by dino3711

can you plz upload the software......plz....

if you have AdvanceBox just click "whats new" on support then download the latest version of Advance and Feel the Power...

Warptech · 05-14-2008, 06:38

Quote:

Originally Posted by Euan

if you have AdvanceBox just click "whats new" on support then download the latest version of Advance and Feel the Power...

I tried sevral times but does not do the update

Advance-Box · 05-14-2008, 07:34

@Warptech

Just go to the support section of www.advance-box.com

you will find:
2.14
2.14a
2.15

Download 2.15 (about 38mb), extact to new folder and you are good to go...

B.R.
X-Shadow

Warptech · 05-14-2008, 15:59

Quote:

Originally Posted by Advance-Box

@Warptech

Just go to the support section of www.advance-box.com

you will find:
2.14
2.14a
2.15

Download 2.15 (about 38mb), extact to new folder and you are good to go...

B.R.
X-Shadow

Thanx for uploading 2.15 but I got it from another site and I did whats new and it also downloaded the file again although I have 2.15. I also manage to get dct4+ to work so everything is going well now.
Thanx for all the help I got from the Advance team and X-Shadow.
Support are very good thanx to a good team-keep it up

dmobile1 · 07-02-2008, 07:25

Could some one please tell me, how do you use the DCT4++ software. which box do you use. I have advanceUFS.
please explain abit detail about using the DCT4+ free software

Advance-Box · 07-03-2008, 05:54

@dmobile1

If you are using AdvanceUFS, you need 2 UFS Boxes...

On the first UFS Box you connect the AdvanceUFS.
On the second UFS Box you connect the DCT4+ phone.

Then you Run the EXE when both UFS Boxes are connected to the PC.

B.R.
X-Shadow

astrong · 01-07-2009, 05:31

so gr8 u 4 give d' solution when use 2 ufs & advance..........

for waiting update..............

adi sukmono · 01-12-2009, 18:40

what..using 2 box?...its nt good for yours busines sir,,,cause nt simple

arybraga · 01-12-2009, 18:43

what..using 2 box??????

andy_jpn · 01-15-2009, 14:20

@arvbraga

yes you need 2 ufs box
1 for connect advance ufs
1 for connect phone

this is very simple

dmobile1 · 02-28-2009, 04:05

Quote:

Originally Posted by andy_jpn

@arvbraga

yes you need 2 ufs box
1 for connect advance ufs
1 for connect phone

this is very simple

is that connect them all in series
first ufs to usb
second advance ufs to ufs box
third ufs box to advance ufs
is this how you connect them

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
100 free DCT4 RPL for Testing dct4 RPL Server.	faizanbhatti94	Nokia Digital Core Technology 4 ( DCT-4 )	82	03-16-2010 19:05
Test Box , Try and see	spider-man	Samsung Flashers, Software, Firmware.	2	02-08-2008 00:02
Tested DCT4 hex for free! Download and don't forget to rete me :-)	uu1dx	Nokia Digital Core Technology 4 ( DCT-4 )	158	03-11-2007 04:09
Corrupted MMC, please try and test	Uvedovle	Hardware Repair by brands	14	09-09-2005 09:16
TRY and TRY !!not find the solution for unlock 3027	dreba	Phone Unlocking Codes & Maps	1	02-20-2003 00:34

05-14-2008, 02:47	#2 (permalink)
dino3711 Freak Poster Join Date: Aug 2006 Location: philippines Age: 41 Posts: 187 Member: 324702 Status: Offline Thanks Meter: 42	can you plz upload the software......plz....

05-14-2008, 02:57	#3 (permalink)
sam3578 Freak Poster Join Date: Jul 2007 Location: murtha Posts: 419 Member: 540170 Status: Offline Thanks Meter: 101	try to check this link sir.... CLICK ME

05-14-2008, 07:34	#6 (permalink)
Advance-Box No Life Poster Join Date: Dec 2007 Posts: 7,598 Member: 651945 Status: Offline Thanks Meter: 20,118	@Warptech Just go to the support section of www.advance-box.com you will find: 2.14 2.14a 2.15 Download 2.15 (about 38mb), extact to new folder and you are good to go... B.R. X-Shadow

07-02-2008, 07:25	#8 (permalink)
dmobile1 No Life Poster Join Date: Jun 2008 Posts: 502 Member: 803622 Status: Offline Thanks Meter: 41	Could some one please tell me, how do you use the DCT4++ software. which box do you use. I have advanceUFS. please explain abit detail about using the DCT4+ free software

07-03-2008, 05:54	#9 (permalink)
Advance-Box No Life Poster Join Date: Dec 2007 Posts: 7,598 Member: 651945 Status: Offline Thanks Meter: 20,118	@dmobile1 If you are using AdvanceUFS, you need 2 UFS Boxes... On the first UFS Box you connect the AdvanceUFS. On the second UFS Box you connect the DCT4+ phone. Then you Run the EXE when both UFS Boxes are connected to the PC. B.R. X-Shadow

01-07-2009, 05:31	#10 (permalink)
astrong Freak Poster Join Date: Jun 2008 Posts: 120 Member: 798811 Status: Offline Sonork: astrong Thanks Meter: 16	so gr8 u 4 give d' solution when use 2 ufs & advance.......... for waiting update..............

01-12-2009, 18:40	#11 (permalink)
adi sukmono Freak Poster Join Date: Feb 2008 Location: Street line baby Posts: 474 Member: 695310 Status: Offline Thanks Meter: 144	what..using 2 box?...its nt good for yours busines sir,,,cause nt simple

01-12-2009, 18:43	#12 (permalink)
arybraga Freak Poster Join Date: Aug 2008 Posts: 254 Member: 837940 Status: Offline Sonork: 83906941 Thanks Meter: 48	what..using 2 box??????

01-15-2009, 14:20	#13 (permalink)
andy_jpn Freak Poster Join Date: Mar 2006 Location: japan Posts: 361 Member: 248942 Status: Offline Sonork: 100.1590361 Thanks Meter: 455	@arvbraga yes you need 2 ufs box 1 for connect advance ufs 1 for connect phone this is very simple