MICROBOX how can u unlock n95

[midou01]

Originally Posted by al ahmet

this is still good if if it can unlock n95 with no tp or logs? can u let me know please

But it is NoTP solution and free for microbox users, no logs no special activation...
You can unlock your N95 with just a jaf interface and FBUS cable, in next update you will be able to use UFS

[f164]

Originally Posted by midou01

Thanks for clarifying the situation for microbox users.You are right, microbox is needed to run nokia module (protection) but jaf is the interface to connect the phone and communicate with software, soon it will be added ufs. For use with jaf, 7 pin modified cable (with 5k or 10k resistor to be able to enter local mode) is needed to unlock proprely BB5 phones.
N95 is sure supported, take a look here:

START TIME: 20:33:55
CONNECTING TO JAF: OK!
READING JAF FIRMWARE: OK! (FW: 01B1)
NOKIA N95 RM159 UNLOCK: START!
SET PHONE TO TEST MODE: OK!
SET JAF TO FBUS MODE: OK!
READING MCU SW VERSION: OK!
READING IMEI: OK!
READING LOCK INFO: OK!
CONFIG KEY: 0000000000000000
PROVIDER KEY: 2080100000000000
COUNTERS: 0(3) 0(10)
STATUS: LOCKED
READING DATA: OK!
SAVING BACKUP: OK!
C:\DOCUMENTS AND SETTINGS\SAM\BUREAU\MICROBOXNOKIA_CR V1.0.0.0 FINAL
OK\\358064017273743_2008_12_10_20_34_50.PM
SET JAF TO FLASH MODE: OK!
SENDING BOOT: OK!
RAPX VERSION: RAPIDO OLD
RAPX ID: 000000010000022600010006400C192101021103
RAPX PUBID: 22600111856B005286E37A2910D24776B2E2A349
RAPX ROMID: A8C1D6713E691FF8
RAPX HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
EM ID 1: 00000295
EM ID 2: 00000B22
SENDING PATCH APPLICATION: OK!
TEST CALL:
CPSR - 0X0000001F
P15_1 - 0X00C5387A
P15_2 - 0X00C5197E
P15_3 - 0X00C5397E
ESN_INIT RET - 0X00000001, <TMP_BUFF2> - 0X00000027
ESN_READ RET - 0X00000001, <TMP_BUFF2> - 0X00000022
NORMAL BB5 FOUND - 0X000B21F0
LR - FFFF89C4, PARAM - 0X03, SIZE - 0X00
MONEY - FOUND, LOST AND FOUND, SUN - FOUND
UPDSLOCK - 0X00000001
RET - 0X01, <TMP_BUFF2> - 0X23
PM_308 CRC - 0X0018F579
RUNING PATCH APPLICATION: OK!
READING CALCULATED SPDATA: OK!
C:\DOCUMENTS AND SETTINGS\SAM\BUREAU\MICROBOXNOKIA_CR V1.0.0.0 FINAL
OK\\358064017273743_2008_12_10_20_35_57_UNLOCKED.P M
REBOOTING PHONE: OK!
SET JAF TO FBUS MODE: OK!
PREPAIRING UNLOCK DATA: OK!
WRITING UNLOCK DATA: OK!
REBOOTING PHONE: OK!
READING MCU SW VERSION: OK!
READING IMEI: OK!
READING LOCK INFO: OK!
CONFIG KEY: 0000000000000000
PROVIDER KEY: 2440700000000000
COUNTERS: 0(3) 0(10)
STATUS: NOT LOCKED
NOKIA N95 RM159 UNLOCK: END!

PHONE INFO:
IMEI : 358064017273743
MCU SW : V 06WK41V43.3 04-01-08
RM-159 NOKIA
END TIME: 20:38:09

i see config key 0000000 is this normal ?

[[Rod]]

what u could improve is repair ffff bb5king does not work 100%

regards

[fypoi]

what s wrong

START TIME: 21:48:22
CONNECTING TO JAF: OK!
READING JAF FIRMWARE: OK! (FW: 01B1)
NOKIA N95 RM159 UNLOCK: START!
SET PHONE TO TEST MODE: OK!
SET JAF TO FBUS MODE: OK!
READING MCU SW VERSION: OK!
READING IMEI: OK!
READING LOCK INFO: OK!
CONFIG KEY: 0000000000000000
PROVIDER KEY: 2080100000000000
COUNTERS: 0(3) 0(10)
STATUS: LOCKED
READING DATA: OK!
SAVING BACKUP: OK!
C:\PROGRAM FILES\MICRO BOX\\3**************_2008_12_11_21_49_14.PM
SET JAF TO FLASH MODE: OK!
SENDING BOOT: OK!
RAPX VERSION: RAPIDO OLD
RAPX ID: 000000010000022600010006400C192101021103
RAPX PUBID: 04800018636300524AA8647810D86D0BEBF9346D
RAPX ROMID: A8C1D6713E691FF8
RAPX HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
EM ID 1: 00000295
EM ID 2: 00000B22
SENDING PATCH APPLICATION: ERROR 1014!
NOKIA N95 RM159 UNLOCK: END!

PHONE INFO:
IMEI : 3**************
MCU SW : V 06WK41V43.3 04-01-08
RM-159 NOKIA
END TIME: 21:49:38



thank s for reply

[fypoi]

and this
START TIME: 00:10:16
CONNECTING TO JAF: OK!
READING JAF FIRMWARE: OK! (FW: 01B1)
NOKIA N95 RM159 READ INFO: START!
SET PHONE TO TEST MODE: OK!
SET JAF TO FBUS MODE: OK!
READING MCU SW VERSION: OK!
READING IMEI: OK!
READING LOCK INFO: OK!
CONFIG KEY: 0000000000000000
PROVIDER KEY: 2080100000000000
COUNTERS: 0(3) 0(10)
STATUS: LOCKED
NOKIA N95 RM159 READ INFO: END!

PHONE INFO:
IMEI : 3***************
MCU SW : V 06WK41V43.3 04-01-08
RM-159 NOKIA
END TIME: 00:10:23

START TIME: 00:10:33
CONNECTING TO JAF: OK!
READING JAF FIRMWARE: OK! (FW: 01B1)
NOKIA N95 RM159 UNLOCK: START!
SET PHONE TO TEST MODE: OK!
SET JAF TO FBUS MODE: OK!
READING MCU SW VERSION: OK!
READING IMEI: OK!
READING LOCK INFO: OK!
CONFIG KEY: 0000000000000000
PROVIDER KEY: 2080100000000000
COUNTERS: 0(3) 0(10)
STATUS: LOCKED
READING DATA: ERROR 1001!
NOKIA N95 RM159 UNLOCK: END!

PHONE INFO:
IMEI : 3**************
MCU SW : V 06WK41V43.3 04-01-08
RM-159 NOKIA
END TIME: 00:10:42

[midou01]

It is problem in cable m8, RX2 pin is not well connected to phone FBUS pin.

[fypoi]

thank s for reply i try with onether modified cable and i post result