Need good solution for error 1002 - GSM-Forum

dabdoub_30 · 01-08-2009, 08:37

I have worked 2 days for unlocking my511x but still not unlocked please no one come and say use seach or use this trick

To be 100% successfull unlcoking sagem Use prolific cable.
If you want to use rj45 port, then use this trick: After the software reads the phone and ask you to remove phone battery and power on the phone again, wait untill progress bar reach 6% and power on the phone then. if the boot is not loaded at the same time you press power on, remove the battery and repeat the process quickly. In fact sagem software must detect the phone exactely when you power on the phone, if there is some delay (even 1s) the boot will not be loaded correctly and you will have error 1002. Then you have to repeat the operation or simply buy prolific cable

i have prolific cable and still same error and changed the pc also please micro box team check software we are paying yo get logs and software is not working properly need good update thanx in advance

dabdoub_30 · 01-08-2009, 08:38

Here is the log
SAGEM MY511X READ CODES: START!
CONNECTING TO SERVER: OK!
ASKING SERVER FOR ACCESS: ACCEPTED!
GETTING CREDIT DATA FROM SERVER: OK!
CREDIT USED: 0
CREDIT LIMIT: 10
SEARCHING FOR PHONE: FOUND!
READING FIRMWARE INFO: OK!
READING HASH TABLE INFO: OK!
READING IMEI: OK!
READING MODEL INFO: OK!
PRESS POWER: OK!
READING CPU INFO: OK!
LOADING CERTIFICATE: OK!
LOADING APPLICATION: ERROR 1002!
SAGEM MY511X READ CODES: END!

clinicgsm · 01-08-2009, 18:31

Hi, me too same pb (with prolific)

aduel · 01-08-2009, 19:03

i have the same probleme and solution until now

01-08-2009, 08:37	#1 (permalink)
dabdoub_30 Freak Poster Join Date: Feb 2008 Posts: 99 Member: 712212 Status: Offline Thanks Meter: 23	Need good solution for error 1002 I have worked 2 days for unlocking my511x but still not unlocked please no one come and say use seach or use this trick To be 100% successfull unlcoking sagem Use prolific cable. If you want to use rj45 port, then use this trick: After the software reads the phone and ask you to remove phone battery and power on the phone again, wait untill progress bar reach 6% and power on the phone then. if the boot is not loaded at the same time you press power on, remove the battery and repeat the process quickly. In fact sagem software must detect the phone exactely when you power on the phone, if there is some delay (even 1s) the boot will not be loaded correctly and you will have error 1002. Then you have to repeat the operation or simply buy prolific cable i have prolific cable and still same error and changed the pc also please micro box team check software we are paying yo get logs and software is not working properly need good update thanx in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need good solution for lg 3g no signal	ruvanw1979	LG	0	01-30-2008 09:28
need good solution for install or help	speedstarrr	HWK	2	08-25-2007 05:21
Good solution for PrePaid Card but ...	One	The Market Feed Back	4	04-05-2002 17:40
A good solution for Nokia 3210	plutono	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	10-17-1999 10:17

01-08-2009, 08:38	#2 (permalink)
dabdoub_30 Freak Poster Join Date: Feb 2008 Posts: 99 Member: 712212 Status: Offline Thanks Meter: 23	Here is the log SAGEM MY511X READ CODES: START! CONNECTING TO SERVER: OK! ASKING SERVER FOR ACCESS: ACCEPTED! GETTING CREDIT DATA FROM SERVER: OK! CREDIT USED: 0 CREDIT LIMIT: 10 SEARCHING FOR PHONE: FOUND! READING FIRMWARE INFO: OK! READING HASH TABLE INFO: OK! READING IMEI: OK! READING MODEL INFO: OK! PRESS POWER: OK! READING CPU INFO: OK! LOADING CERTIFICATE: OK! LOADING APPLICATION: ERROR 1002! SAGEM MY511X READ CODES: END!

01-08-2009, 18:31	#3 (permalink)
clinicgsm Freak Poster Join Date: Jan 2004 Age: 52 Posts: 281 Member: 50998 Status: Offline Thanks Meter: 12	Hi, me too same pb (with prolific)

01-08-2009, 19:03	#4 (permalink)
aduel No Life Poster Join Date: Mar 2004 Location: MX-KEY is the BEST NOKIA TOOL Posts: 655 Member: 60081 Status: Offline Thanks Meter: 9	i have the same probleme and solution until now