Error J600 Imei Repair - GSM-Forum

ssa · 01-30-2008, 23:56

try to repair imei from J600 with corrupted caldata

but i get the next error when trying to write SN:
Connect Phone OK.
Passive Info OK.
Transfer Pre-Loader Data OK.
Transfer Boot Data...
Switch To Loader Success.
Reading Device Info ...
Flash ID: 0089887E [ 28F512XX ]
Switch Baudrate Success.
Reading Cal Data ...
Please Wait For Decrypt ...
IMEI: Unknown
S/N: Unknown
Writting Cal Data ...
Write data error !
Total Time: 122.65 s

if i use the repair imei in factory mode it gives:
Enter Test Mode OK!
Read Phone Info ...
SW Ver: J600XXGG1
HW Ver: REV:16,8
IMEI: 446919511324030
Read MSL Address Failure !
Total Time: 15.87 s

in SPT mode it gives:
Please Wait Init Java Applet ...
Input IMEI Length Wrong !
Total Time: 0.0 s

however the inputted imei is correct and 15 digits..

whats next ?

SPTTEAM · 01-31-2008, 08:18

if phone imei is 00000 can not repair direct way if its normal imei and u want use spt mode must fill 14 lenght imei and do it

P.S = With other box if u write patch flash for repair 0000 also its can not change imei

hitibiti · 02-22-2008, 21:44

sorry but you are not welcome her cause always you have answer on all same topic and .....

01-30-2008, 23:56	#1 (permalink)
ssa No Life Poster Join Date: Feb 2003 Location: Inside CPU Age: 43 Posts: 1,861 Member: 23420 Status: Offline Thanks Meter: 3,080	Error J600 Imei Repair try to repair imei from J600 with corrupted caldata but i get the next error when trying to write SN: Connect Phone OK. Passive Info OK. Transfer Pre-Loader Data OK. Transfer Boot Data... Switch To Loader Success. Reading Device Info ... Flash ID: 0089887E [ 28F512XX ] Switch Baudrate Success. Reading Cal Data ... Please Wait For Decrypt ... IMEI: Unknown S/N: Unknown Writting Cal Data ... Write data error ! Total Time: 122.65 s if i use the repair imei in factory mode it gives: Enter Test Mode OK! Read Phone Info ... SW Ver: J600XXGG1 HW Ver: REV:16,8 IMEI: 446919511324030 Read MSL Address Failure ! Total Time: 15.87 s in SPT mode it gives: Please Wait Init Java Applet ... Input IMEI Length Wrong ! Total Time: 0.0 s however the inputted imei is correct and 15 digits.. whats next ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
j600 imei change error	omkarvitekar	Z3X-Team Products	12	06-06-2010 07:35
J600 imei repair error	achi_nokia	NSPRO	4	06-06-2010 02:19
J600 Not Repair Imei	alb97	UST Pro II	11	01-08-2010 06:00
J600 - flash repair file NVM -error	domonik26	NSPRO	5	11-13-2008 14:53
about J600 imei 00000000000 repair!!	gsmcall	UST Pro II	4	06-20-2008 16:57

01-31-2008, 08:18	#2 (permalink)
SPTTEAM Banned Join Date: Jun 2007 Location: Samsung Posts: 5,134 Member: 535033 Status: Offline Sonork: 100.45908 Thanks Meter: 18,870	if phone imei is 00000 can not repair direct way if its normal imei and u want use spt mode must fill 14 lenght imei and do it P.S = With other box if u write patch flash for repair 0000 also its can not change imei

02-22-2008, 21:44	#3 (permalink)
hitibiti No Life Poster Join Date: Mar 2003 Location: Canada Age: 44 Posts: 8,146 Member: 24023 Status: Offline Sonork: 100.61317 Thanks Meter: 2,630	sorry but you are not welcome her cause always you have answer on all same topic and .....