Samsung E1200y dead after flash - GSM-Forum

gsmsakthi · 07-04-2014, 08:46

Samsung E1200y dead after flash

Selected model: E1200Y
Selected port: COM8 Z3X BOX Serial Port
Selected port speed: 921600
Waiting phone... detected COM9
Sending FDL... OK
Reconnecting phone... OK
Reading NV... OK
Saved to C:\Program Files\Z3X\Samsung\SamsungTool\Backup\nvitem_E1200Y _4-7-2014_13-6-48.bin
Sending SSBoot... OK
Sending PS... OK
Sending CSC... OK
Erasing UDISC... OK
Flashing done (time - 00:01:35)
Done with Samsung Tool v.17.6

babudatabase · 08-11-2014, 06:58

same problem help anyone

gsmkolik · 08-11-2014, 07:00

your flash file is bad take other flash file

babudatabase · 08-11-2014, 07:51

U have good file share me , i use this file ( e1200ydxnb1_olaanb1 )

babudatabase · 08-11-2014, 08:09

check image only one file available in z3x no other file

a2zmobile_bhw · 11-09-2014, 11:52

same problem after flash dead

Selected model: E1200Y
Selected port: COM11 Z3X BOX Serial Port
Selected port speed: 921600
Reading phone info... error
Done with Samsung Tool v.18.3

Selected model: E1200Y
Selected port: COM11 Z3X BOX Serial Port
Selected port speed: 921600
Waiting phone... detected COM139
Sending FDL... OK
Reconnecting phone... OK
Reading NV... OK
Saved to C:\Program Files\Z3X\Samsung\SamsungTool\Backup\nvitem_E1200Y _9-11-2014_16-31-41.bin
Sending SSBOOT... OK
Sending PS... OK
Sending CSC... OK
Erasing FLASH... OK
Flashing done (time - 00:01:30)
Done with Samsung Tool v.18.3

subhankarpaul81 · 12-08-2014, 10:55

Its not the problem of file...its matter is some thing wrong at the way of flashing.....Plzz send a solllution...

subhankarpaul81 · 12-08-2014, 12:09

Hay friends Here ur sollution....
e1200y (1) - Download - 4shared
download the file and write it through volcano tool or dragon tool ur problem has solved 100% i try it...

sifi.90 · 12-08-2014, 13:33

mark ( re-write nv ) and use Samsung 17.6

ganeshanr · 04-06-2016, 12:57

thankssssssssssssssssssssss

palash.sarder6 · 07-09-2016, 10:24

1st flash z3x set is ded after flash this file with volcano set is ok ,but no network

palash.sarder6 · 07-09-2016, 10:25

Vcc: 7 8
Gnd: 15 17 19
Analyzing D+ and D-...
D+ = 5, D- = 4
Analyzing USB device, please wait...
Find USB device:SPRD U2S Diag (COM23), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.2
CPU TYPE:[6530C000]
FLASH ID: 00C8006000170000
Flash Type:[GD] 25LG64bWL
Size:0x800000(8MB)
Writing completed.
>>Flash file C:\Users\my pc\Downloads\Compressed\e1200y (1)\e1200y.bin has been written.

palash.sarder6 · 07-09-2016, 10:26

write Nv file this problem....

Gnd: 15 17 19
Analyzing D+ and D-...
D+ = 5, D- = 4
Analyzing USB device, please wait...
Find USB device:SPRD U2S Diag (COM10), (VID_1782&PID_4D00)
Not support this CPU

palash.sarder6 · 07-09-2016, 10:29

plz help any one very urgent

ankit113gupta · 11-13-2016, 11:37

after flashing network problem please help...

07-04-2014, 08:46	#1 (permalink)
gsmsakthi Freak Poster Join Date: Jan 2010 Posts: 294 Member: 1206133 Status: Offline Thanks Meter: 8	Samsung E1200y dead after flash Samsung E1200y dead after flash Selected model: E1200Y Selected port: COM8 Z3X BOX Serial Port Selected port speed: 921600 Waiting phone... detected COM9 Sending FDL... OK Reconnecting phone... OK Reading NV... OK Saved to C:\Program Files\Z3X\Samsung\SamsungTool\Backup\nvitem_E1200Y _4-7-2014_13-6-48.bin Sending SSBoot... OK Sending PS... OK Sending CSC... OK Erasing UDISC... OK Flashing done (time - 00:01:35) Done with Samsung Tool v.17.6

08-11-2014, 06:58	#2 (permalink)
babudatabase Freak Poster Join Date: Jan 2011 Location: Chennai Posts: 319 Member: 1490564 Status: Offline Sonork: 100.1671685 Thanks Meter: 182	same problem help anyone

08-11-2014, 07:00	#3 (permalink)
gsmkolik No Life Poster Join Date: Jul 2006 Location: Turkey Age: 39 Posts: 884 Member: 311347 Status: Offline Sonork: 100.1672192 Thanks Meter: 486	your flash file is bad take other flash file

08-11-2014, 07:51	#4 (permalink)
babudatabase Freak Poster Join Date: Jan 2011 Location: Chennai Posts: 319 Member: 1490564 Status: Offline Sonork: 100.1671685 Thanks Meter: 182	U have good file share me , i use this file ( e1200ydxnb1_olaanb1 )

08-11-2014, 08:09	#5 (permalink)
babudatabase Freak Poster Join Date: Jan 2011 Location: Chennai Posts: 319 Member: 1490564 Status: Offline Sonork: 100.1671685 Thanks Meter: 182	check image only one file available in z3x no other file

11-09-2014, 11:52	#6 (permalink)
a2zmobile_bhw Banned Join Date: Aug 2011 Location: Bhairahawa_Nepal Posts: 573 Member: 1638066 Status: Offline Thanks Meter: 170	same problem after flash dead Selected model: E1200Y Selected port: COM11 Z3X BOX Serial Port Selected port speed: 921600 Reading phone info... error Done with Samsung Tool v.18.3 Selected model: E1200Y Selected port: COM11 Z3X BOX Serial Port Selected port speed: 921600 Waiting phone... detected COM139 Sending FDL... OK Reconnecting phone... OK Reading NV... OK Saved to C:\Program Files\Z3X\Samsung\SamsungTool\Backup\nvitem_E1200Y _9-11-2014_16-31-41.bin Sending SSBOOT... OK Sending PS... OK Sending CSC... OK Erasing FLASH... OK Flashing done (time - 00:01:30) Done with Samsung Tool v.18.3

12-08-2014, 10:55	#7 (permalink)
subhankarpaul81 Major Poster Join Date: Jul 2013 Posts: 44 Member: 1976375 Status: Offline Sonork: subhankarpaul81 Thanks Meter: 8	Its not the problem of file...its matter is some thing wrong at the way of flashing.....Plzz send a solllution...

12-08-2014, 12:09	#8 (permalink)
subhankarpaul81 Major Poster Join Date: Jul 2013 Posts: 44 Member: 1976375 Status: Offline Sonork: subhankarpaul81 Thanks Meter: 8	Hay friends Here ur sollution.... e1200y (1) - Download - 4shared download the file and write it through volcano tool or dragon tool ur problem has solved 100% i try it...

12-08-2014, 13:33	#9 (permalink)
sifi.90 Freak Poster Join Date: Feb 2010 Posts: 171 Member: 1231942 Status: Offline Thanks Meter: 19	mark ( re-write nv ) and use Samsung 17.6

04-06-2016, 12:57	#10 (permalink)
ganeshanr Freak Poster Join Date: Feb 2010 Location: coimbatore,tn,india Posts: 157 Member: 1243722 Status: Offline Thanks Meter: 12	thankssssssssssssssssssssss

07-09-2016, 10:24	#11 (permalink)
palash.sarder6 Freak Poster Join Date: Nov 2011 Location: kolkata Age: 34 Posts: 114 Member: 1682691 Status: Offline Sonork: 1656075 Thanks Meter: 17	1st flash z3x set is ded after flash this file with volcano set is ok ,but no network

07-09-2016, 10:25	#12 (permalink)
palash.sarder6 Freak Poster Join Date: Nov 2011 Location: kolkata Age: 34 Posts: 114 Member: 1682691 Status: Offline Sonork: 1656075 Thanks Meter: 17	Vcc: 7 8 Gnd: 15 17 19 Analyzing D+ and D-... D+ = 5, D- = 4 Analyzing USB device, please wait... Find USB device:SPRD U2S Diag (COM23), (VID_1782&PID_4D00) Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.2 CPU TYPE:[6530C000] FLASH ID: 00C8006000170000 Flash Type:[GD] 25LG64bWL Size:0x800000(8MB) Writing completed. >>Flash file C:\Users\my pc\Downloads\Compressed\e1200y (1)\e1200y.bin has been written.

07-09-2016, 10:26	#13 (permalink)
palash.sarder6 Freak Poster Join Date: Nov 2011 Location: kolkata Age: 34 Posts: 114 Member: 1682691 Status: Offline Sonork: 1656075 Thanks Meter: 17	write Nv file this problem.... Gnd: 15 17 19 Analyzing D+ and D-... D+ = 5, D- = 4 Analyzing USB device, please wait... Find USB device:SPRD U2S Diag (COM10), (VID_1782&PID_4D00) Not support this CPU

07-09-2016, 10:29	#14 (permalink)
palash.sarder6 Freak Poster Join Date: Nov 2011 Location: kolkata Age: 34 Posts: 114 Member: 1682691 Status: Offline Sonork: 1656075 Thanks Meter: 17	plz help any one very urgent

11-13-2016, 11:37	#15 (permalink)
ankit113gupta Junior Member Join Date: Dec 2009 Posts: 14 Member: 1183021 Status: Offline Sonork: i dont't have Thanks Meter: 1	after flashing network problem please help...